XROCKER CERBERUS GAMING OTTOMAN TV BED User manual

PLEASE read this leaflet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fitting check list. Do not destroy
any of the packing until you are certain that you have all the necessary part for assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be kept
away from young children while assembling your unit to avoid danger of choking hazards.
COLOUR: RED/BLACK, BLUE/BLACK
SIZE : SINGLE 3',SMALL DOUBLE 4',DOUBLE 4'6''
ASSEMBLY INSTRUCTION
IMPORTANT :
Please reading through this leaflet and then follow the simple step-by-step instruction.
Please keep fittings out of children reach.
Please ensure products place on flat & soft surface.
Please ensure you have the right tools, Do Not use power tools to assembly this products.
Please ensure a clean, dry and spacious area for assembly, due to the size of this product we
recommend that it is assembled in the room intended for use.
Please retain these instruction for future reference.
WARNINGS
Ensure products is fully assembled and secured as illustrated before use.
Ensure the legs remain in contact with the ground at all time.
Ensure all screws or bolts are tightened and inspect regularly.
Do Not stand or jump on the product.
Do Not use this product if parts are missing, damage or worn.
℃.
Page 1 of 12
CERBERUS GAMING OTTOMAN TV BED
Do Not expose this product to dripping or splashing, rain or areas with heavy moisture.
Do Not place the product under direct sunlight, open flames such as candles, heat or radiators.
Keep away from temperatures over 35
Do Not use scourer, abrasivers or chemical cleaners, only clean with sponge wipe and warm soapy water.
INFORMATION :
Ottoman TV Bed - Upholstery bed, Complies with essential requirements of the EMC.
Directive 2004/108/EC and Low Voltage Directive 2006/95/EC.
Maximum TV dimension W750MM*H450MM*D60MM.
Do Not let children play with the mechanism.
Don't insert objects into the TV compartment, do not try to service this product yourself and never use
any lubricants – Seek expert help – contact your retailer.

ELECTRICAL COMPONENTS
In order to prevent injury, never attempt to remove the cover or any other components.
Power cord – only to plugged into an AC 110V – 240V power outlet.
Power off before plug in / unplug.
Regularly check all the fittings are tight & that there are no loose cables that could get trapped.
Unplug the electrical cord during thunderstorms / not in used.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have need
given supervision / instruction the use of the appliance who’s responsible for their safety.
Page 2 of 12
COLOUR: RED/BLACK, BLUE/BLACK
SIZE : SINGLE 3',SMALL DOUBLE 4',DOUBLE 4'6''
CERBERUS GAMING OTTOMAN TV BED

Parts
(2) Footboard x 1pc (3) Side Rail x 2pcs
(1) Headboard x 1pc
R
HEADBOARD
L
HEADBOARD
(4) Centre Support Rail x 1pc
(12) Horizontal Bar x 1pc(11) Gas Strut x 2pcs(10) Hinge x 2pcs
(14) Slats x 28pcs(13) Non Woven Fabric x 1pc (15) Metal Corner Plate x 4pcs
(9) Mattress Stopper x 2pcs
(16) Strap x 2pcs (17) Headboard Leg x 2pcs (18) Footboard Leg x 2pcs
(19) Button x 2pcs
(5) Long Frame Rail R x 1pc (6) Long Frame Rail L x 1pc
(8) Horizontal Frame Rail x 1pcs
(7) Horizontal Frame Rail x 1pcs
Page 3 of 12

4x
Washer M6 x 13mm
HJ
1x
Spanner
4x
30mm M6 Bolt
G
M
4x
Flat Washer M6 x16
L
4x
15mm M4 Bolt
K
1x
M5 Allen Key
Fittings
12x
30mm M8 Bolt
B
12x
16mm M8 Bolt
A
14x
40mm M8 Bolt
C
8x
50mm M8 Bolt
D
8x
Flat Washer M8x22
4x
30mm M3 Screw
F
O
28x
End Slat Cap
P
14x
Centre Slat Cap
E
N
1x
M4 Allen Key
6x
NUT M8 x 13mm
I
Step 1
K
1x
M5 Allen Key
8x
40mm M8 Bolt
C
C
K
10
12
11
Page 4 of 12

Step 2
Step 3
8x
30mm M8 Bolt
BK
1x
M5 Allen Key
3
BK
4x
Washer M6 x 13mm
HN
1x
M4 Allen Key
4x
30mm M6 Bolt
G
GN
3
G
15
HH
Page 5 of 12

Page 6 of 12
Step 5
Step 4
4x
30mm M8 Bolt
BK
1x
M5 Allen Key
4x
30mm M3 Screw
F
12
3
B
K
B
19
F
F

Page 7 of 12
When selecting a TV for this bed please ensure the dimensions and fixing pins are compatible.
TV Max Size: overall dimensions up to W750 x H450 x D60mm.
- Vertical Fixing Adjustable up to 300mm.
- Fixing screws 4mm.
Max 2CM
Max Height 50cm
BOTTOM OF TV
SHOULD BE LEVEL
WITH LIP
Maximum VESA Mounting bracket dimensions: Horizontal fixing Adjustable up to 265mm.
Use the screws provided to attach the TV to the bracket. if the screws supplied are not the correct size
please source suitable ones recommended by the TV manufacturer from your local hardware store.
Connect the TV lift up Power cord from the control box to the main
supply (extention lead might be needed) .
Up/Down Button
TV Lift Up
Power cord
Extension lead
WARNING
Plug the TV power cable into the socket (at the bottom of footboard)
Connect the cables to the television & media equipment and make
sure the cables are not loose. If necessary use cable ties & cable
The mains supply must be fully earthed when it not in use.
then connect your own media cables.
clips to route cable safely.
AC 220-240V
Lift Buttons
HDMI
Aerial
WARNING
HAZARDOUS VOLTAGE.
Contact may cause
electric shock or burn.
This unit is to be serviced by
trained personnel only.
Power Lead
The TV mounting backet is facfovy fitted, please ensure it's level when install the TV.
Use the fittings provide by TV manufacturer, from the TV installation kit from this purchase.

Page 8 of 12
N
1x
M4 Allen Key
IMPORTANT
Step 6
M
4x
Flat Washer M6 x16
L
4x
15mm M4 Bolt
Sliding Vertical Arm
L
MN
4 x 4mm x15mm ( part L ) screw are supplied for securing the TV unit to Mast bracket.
These screws are suitable for majority of TVs. (Some model might required different
size of fixing screw, this have to be obtained separafely).
Please check the manufactures manual books for defails.
Before fitting your TV to bracket, please check and ensure your TV dimensions are suitable for the bed.
TV Max Size: overall dimensions up to W750 x H450 x D60mm.
Attach TV by using the appropriate screws and adjust the sliding vertical arm to sit neatly on top of the TV.
Please ensure the bedframe is secure before fitting the TV, 2 Persons are required for this step.

Page 9 of 12
Place the wire cable through the Cable Management Caps to prevent any damage to
the wire cable (eg.other power cord) when TV Lift Mechanism is operating.
Make sure the wire cables length are long enough to let the TV Lift Mechanism move freely.
WARNING
TV
AV Ethernet Wire
HDMI Ethernet Wire
TV Lift Mechanism
Power Cord
Additional cable outlets for
additional electrical connections
Power Cord
AV /HDMI Ethernet Wire
Wire through from bottom
of footboard
Power Cord AV /HDMI Ethernet Wire
Please use adaptor if your TV is fitted with integral power cord wire.

Page 10 of 12
Step 8
K
1x
M5 Allen Key
Step 7
12x
16mm M8 Bolt
AK
1x
M5 Allen Key
X6
CK
IJ
6x
40mm M8 Bolt
C
6x
NUT M8 x 13mm
IJ
1x
Spanner
K
A
6
5
7
8
4
A
AK
Headboard
Headboard

Page 11 of 12
Step 9
8x
50mm M8 Bolt
D
8x
Flat Washer M8x22
EK
1x
M5 Allen Key
17
D
E
13 D
E
D
E
D
E
18
Step 10
O
28x
End Slat Cap
P
14x
Centre Slat Cap
9
9
O
P
14

Page 12 of 12
Step 11
J
1x
Spanner
Flange Nut
J
16
Secure the pneumatic lifting mechanisms on
the side rail (3) into place by using flange nuts
as shown.
Do not over tighten the nuts as this will stop
the pneumatic arm rotating freely and could
damage the mounting.