Xstatic Pro Lighting X-BARI6RGBUV User manual

Your cables should be made with a male and female XLR connector on either
end of the cable. Also remember that OMX cable must be daisy chained and
cannot be split.
Notice: Be sur e to follow figures two and three when making your own cables.
Do not use the ground lug on the XLR connector. Do not connect the cable's
shield conductor to the ground lug or allow the shield conductor to come in
contact with the XLR's outer casing. Grounding the shield c ould cause a short
circuit and erratic behavior.

   
 

 
I
 

 I

. . :
I
I





    


     
 
  







8

 
 

55 Hook Rd 46A Bayonne NJ 07002
  
 p  d 




