Xtreme Power 96117 Original instruction manual

GRAVITY INVERSION THERAPY TABLE
SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S
SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH
AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER)
OWNER’S MANUAL AND SAFETY INSTRUCTIONS
ITEM: 96117
FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: 909.628.0880 MON-FRI 9AM TO 3PM PST

IMPORTANT SAFETY INFORMATION
GENERAL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to follow the warnings and instructions may
result in serious injury. Save all warnings and instructions for future reference.
SAFETY
The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible
conditions and situations that may occur. It must be understood by the operator that common sense and
caution are factors which cannot be built into this product, but must be supplied by the operator. Read
carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure
to follow the safety rules and other basic safety precautions may result in serious personal injury.
1
Warm up slowly and limit your exercise to 5 minutes the rst time using machine.
Adjust the inclination angle to less than 30° the rst time using the machine.
Please follow the manual while in use. If you nd any issue during assembly or follow up maintenance,
or hear any unusual noise while using, please stop operating immediately.
Make sure all screws, nuts and bolts are tightened before use.
Always use this machine on a solid, at surface. Cover the oor or carpet with an exercise mat to protect
from damage. To ensure safety, make sure all obstacles are at least 18 inches (.5 m) away from the
equipment.
Avoid loose clothing that could possibly get stuck in machine. Keep body parts, hair, and jewellery clear
of moving parts.
Before using the inversion table, please consult your health care professional. If you’re on medication for
heart rate, blood pressure or cholesterol levels please follow doctor’s advice.
Be aware of your body’s signals when using this machine. Please stop exercising if you experience
any of below symptoms: pain, tightness in chest, irregular heartbeat, shortness of breath, feeling light
headed, dizziness or nausea. Proceed only after doctor’s clearance.
This inversion table is for adults only. Keep children and pets away from this equipment.
SAVE THESE WARNINGS
DO NOT use inversion table too soon after eating.
Reduce the inclination angle if you feel uncomfortable. Stop if it doesn’t help.
Maximum weight for user is 220 lbs (100 kg).
Maximum inclination angle suggested is 60°.
DO NOT use aggressive movements, or use weights, elastic bands or any other exercise or stretching
device while on the inversion table.
DO NOT operate equipment while under the inuence of drugs, alcohol, or medication that may cause
drowsiness or disorientation.
DO NOT use or store product outdoors.

PRODUCT INFORMATION
2
The XtremepowerUs inversion therapy table is the secret super power to your health and tness routine.
This inversion table aims to combat nasty back aches, pains, and strains – but its benets also extend to
improving posture and circulation and increasing your exibility. The XtremepowerUs inversion table was
also designed with your comfort in mind. It features a hand-crafted Deluxe Leather Backrest to aid your
relaxation. The high quality padded backrest provides lumbar support. Comfortable foam rollers and extra-
long handle bars allow for an easy inversion experience.
This inversion therapy table includes a heavy duty tubular steel frame with non-skid oor stabilizers, so you
can take the fear of slipping or falling out of your inversion therapy routine.
Add the XtremepowerUs inversion table to your home!
Stimulate circulation; Elongate spine; Relieve pressure; Strengthen muscle; Increase exibility
Easy assembly & foldable; Heavy-duty steel frame with big non-slip bases
Material: PU Leather
Adjustable User Heights: 4’10” - 6’5”
Max User Weight: 300lbs
Assembly Require: Yes
Overall Dimension: 44”(L) x 28”(W) x 60”(H)
Fights Compression Fatigue
Helps Posture
Increases Body Flexibility
Reduces Back Stress
Stimulates Blood Circulation
Eliminates Back & Neck Pain

FEATURES AND SPECIFICATIONS
3
BED FRAME
HANDLEBAR
REAR U-FRAME
ADJUSTABLE BOOM
FOAM FOOT REST
PIVOT ARM
ADJUSTMENT KNOB
HEEL HOLDER
FRONT FRAME
HEADREST
Stimulate circulation; Elongate spine; Relieve pressure; Strengthen muscle;
Increase exibility
Easy assembly & foldable; Heavy-duty steel frame with big non-slip bases
Material: PU Leather
Adjustable User Heights: 4'10" - 6'5"
Max User Weight: 300lbs
Assembly Require: Yes
Overall Dimension: 44"(L) x 28"(W) x 60"(H)
Fights Compression Fatigue
Helps Posture
Increases Body Flexibility
Reduces Back Stress
Stimulates Blood Circulation
Eliminates Back & Neck Pain
FEATURES:

4
PARTS LIST AND COMPONENTS

ASSEMBLY
Use the hex screw (14) and the at llet (15) to assemble the front preventing bracket (1). Adjust the angle,
insert ASFE bar (4) into the back bracket’s (2) bores on the side. Following the direction shown above. Insert
the hook into the bore. If you are unable to insert completely, it is suggested to insert one bore for rst use.
STEP 1
5

ASSEMBLY
Use the cross at head screw (20) to mount the head table to the back bracket, then lock it. Use the hex
screw (16) and at llet (15), nut (18) to assemble and lock the iron piece of the back bracket (5) and Z type
bracket (12)
STEP 2
6

ASSEMBLY
7
Use the cross at head screw (20) to mount the head table to the back bracket (5), then lock it. Use the hex
screw (16) and at llet (15), nut (18) to assemble and lock the iron piece of the back bracket 95) and Z type
bracket (12).
STEP 3

ASSEMBLY
8
Use the hex screw (14), the at llet (15), nut (18) to lock the horse (9) which is adjusted based on foot size
with the height adjusting bracket (6).
STEP 4

ASSEMBLY
Insert the height adjusting pipe (6) into the back bracket (5). Insert the drawing pin (22) and the draw pin with
ring (21) into the related bore based on required height, then lock it tightly.
STEP 5
9

ASSEMBLY
Use the hex screw (14), the at llet (15), nut (18) to assemble the left and right handrail (10) with the back
bracket (2). To be safe, insert the pin with ring (21) into the rotating gear’s bore.
STEP 6
10

OPERATION
11

WARRANTY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only and are not available individually
as replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
12