XU1 XJS-101U User manual

Jigsaw
Electrical safety
Using an extension lead
Description of symbols
Read instruction manual
Always use an approved extension lead suitable for
the power input of this tool. Before use, inspect the
extension lead for signs of damage, wear and ageing.
Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always
unwind the lead completely. Use of an extension lead
not suitable for the power input of the tool or which is
electric shock.
The power supply for this product should be protected
by a residual current device (rated at 30mA or less).
A residual current device reduces the risk of electric
shock.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
This tool is double insulated; therefore no
earth wire is required.
Double insulated
Volts
Hertz
Watts
Warning
Alternating current
V
Hz
W
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Young children should be supervised to
ensure that they do not play with the appliance.
XJS-101U
Orignial Instructions
0616
XU1 Power tools
iSC GmbH, Eschenstraße 6, D-94405 Landau, Germany
Telephone: GB: 0151 294 4488 / IRL: 1850 882711
XJS-101U

WARRANTY
All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely
event that your device develops a fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer service number shown. Please note the
following terms under which guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the manufacturer mentioned below promises
to buyers of its new products in addition to their statutory guarantee claims are not affected by this guarantee. Our
guarantee is free of charge to you.
2. The warranty services only covers defects due to material or manufacturing faults on a product which you have
or the replacement of the product, whichever we prefer.
Please note that our devices are not designed for use in commercial, trade or professional applications. A
guarantee contract will not be created if the device has been used by commercial, trade or industrial business or
has been exposed to similar stresses during the guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly instructions or due to incorrect installation, a
failure to follow the operating instructions (for example connecting it to an incorrect mains voltage or current type)
or a failure to follow the maintenance and safety instructions or by exposing the device to abnormal environmental
conditions or by lack of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example overloading the device or the use or
unapproved tools or accessories), ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces (for example by dropping it).
- Damage to the device or parts of the device caused by normal or natural wear or tear or by normal use of the
device.
4. Your Product is guaranteed for a period of 12 months from the original date of purchase and is intended for
DIY (Do It Yourself) use only. Warranty excludes consumable parts, for example: cutting blade. Guarantee claims
should be submitted before the end of the guarantee period within two weeks of the defect being noticed. No
guarantee claims will be accepted after the end of the guarantee period. The original guarantee period remains
applicable to the device even if repairs are carried out or parts are replaced. In such cases, the work performed or
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO THE PLACE OF
PURCHASE WITH YOUR REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts, consumables and missing parts as set
out in the service information in these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
XU1
Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
Cutting capacity: Wood 55mm
Plastic 12mm
Steel 6mm