Yaber Y60 User manual

YABER Y60
INSTRUCTION MANUAL

Language
EN
FR
IT
ES
JP
01-13
14-27
42-55
56-69
70-88

YABER Lifetime Professional Support
Dear Customer,
Woohoo! Your projector is already in your hands! Let's get started!
Do you have any questions on how it works? Please read this manual
thoroughly before using the projector.
Are you satisfied with your projector? If you have any issues, email your
order number and description of your issue to:
Send your email ASAP, as we want to fix your issues the first time you have
them.
Customers sometimes can experience some confusion when using the
projector. Rather than trying to communicate directly with us, many buyers
instead just leave a review on the product page. However, most negative
reviews are caused by non-standardized use rather than a defect in the
product itself.
Actually, many problems can be easily solved by setting, such as no signal,
no sound,cannot connect with WiFi etc. We promise all the projectors have
been carefully checked andpackaged before shipping.
Therefore, if you have any questions, please contact us and give us an
opportunity to improve. We guarantee that we will provide you more
satisfactory solution.
Thanks for your understanding!
Best regards,
YABER TEAM
[email protected].

Product description
Pictures shown are for illustration purpose only.Actual product may vary
due to product enhancement.
01 Power
02 Arrow Keys
03 OK
04 Menu
05 Source
06 Back
07 VGA
08 IR
09 HDMI 1/2 Input
10 Headphone Jack(3.5mm)/AV Input
11 USB 1/2 Input
12 Power Socket
13 Keystone Correction
14 Manual Focus
01
0807
02 03 04 05 06
09
10
11
AV
IR
Imaging System: LCD
Light Source: LED
Projection Size: 50"-200"
Aspect Ratio: 16:9/ 4:3
Power: 110-240V~50/60HZ
Resolution:1280*720(Support1920*1080)
Interface Input:
HDMI*2/USB*2/VGA/AV/
Headphone Jack(3.5mm)
Keystone Correction: ±15°Manual
Projector Weight: 1.92KG
Projection Distance: 1.5M-5M
YABER Y60 Projector
13
EN
VGA
14
12
Power Socket

01
04
06
08
11
14
02
05
03
07
10
09
12
15
13
1. Power: Press this switch when turning on or off the power
2. Mute:Turns the sound on or off
3. Fast Forward Button: Move forward at a speed faster than that at
which it would usually be played
4. Fast Rewind Button: Move rewind at a speed faster than that at which
it would usually be played
5. Play Button: Play or Pause
6. OK Button: Confirm
7/8. Volume Keys: Volume up / volume down
7/8/9/10. Arrows Key: Move the pointer up, down, left and right
11. Source: Change the signal source
12. Menu: Call or exit the projector main menu
13. Exit
14. Previous
15. Next
While using the remote control,
point it toward IR receiver.
（Batteries not included）
Remote control

Thanks
Thank you very much for purchasing the YABER Y60 projector.
Please read this instruction manual carefully before use. Also, please
keep it handy so you can check it at any time.
If in doubt, do not hesitate to contact YABER_Ser[email protected].
We can provide after-sales service until satisfaction.
Observation
Part of the video in Netflix and the main video formats can not be
exported externally due to copyright protection (HDCP protocol). But
since Amazon Fire TV is HDCP compatible, you can play Netflix and the
first video via Amazon fire.
Important safeguards
These safety instructions are to ensure the long life of the projector and
to prevent fires and shocks. Read them carefully and pay attention to all
warnings.
Installation
1. For best results, use the projector in a dark room.
2. Place the projector on a flat, level surface in a dry area away from dust
and moisture.
Main unit of the projector * 1
Instruction manual * 1
3 in 1 * 1 AV cable
HDMI cable * 1 Support Base*1
Lens cleaning * 1
Power cord * 1
Remote control * 1
Replace the remote control battery
1. Push to open the battery cover.
2. Remove both old batteries and install new ones (AA). Make sure that
the polarity of the batteries (+/-) is correctly aligned.
Included

FAQ
4. Exposure to direct sunlight, smoke or steam may damage internal
components.
5. Handle the projector carefully. Falling or shaking can damage internal
components.
6. Do not place heavy objects on top of the projector.
1. At the time of switching on, the indicative light does not work
①. The power supply may not be well connected
②. Check the overheating protection system
2. Pressing the power button on the remote control does not turn on the
projector
①. The remote control batteries are empty
②. The signal between the remote control and the IR sensor is obstructed
③. Strong direct light on the IR sensor?
3. No image on the screen
①. Is the channel setting correct?
②. Is there an input signal?
③. Is the input cable inserted correctly or is it in the wrong position?
④. In PC mode the refresh rate is> 75KHz?
1. The projector is designed to operate with a 110-240 V ~ 50/60 Hz AC
adapter. Ensure that the power supply meets this requirement before
attempting to use the projector.
2. Handle the power cord carefully and avoid bending it too much. A
damaged cord can cause electric shock or fire.
3. If the projector will not be used for a long time, unplug the power cord
from the outlet.
Supply
1. Unplug the projector before cleaning it.
2. Periodically clean the cabinet with a damp cloth. If it is very dirty, use a
mild detergent. Never use strong detergents or solvents such as alcohol
or thinners.
3. Use a blower or lens paper to clean the lens and be careful not to
scratch or damage the lens.
Cleaning

4. The image works but there is no sound
①. Are the input cables connected correctly?
②. Volume at minimum or silent
③. Check that the audio format of the video is in the supported list
5. Turns off automatically after being turned on for a while
①. Is there a barrier around the fan?
②. Small or large voltage fluctuations
③. Check the overheating protection system
6. I can not find devices connected with hard drives or flash drives
①. Re-insert the device
②. Check if the device is working
7. Unable to play video
①. Is the video format correct?
②. The file is corrupted?
③. The device is damaged
Connection device
1.Connecting a PC
1.Use the supplied VGA cable to connect the PC to the projector.
2. Turn on the projector and the computer.
* NOTE: You can also connect an HDMI cable, remember that VGA
connections do not transmit audio, so the sound will be output from the
computer. If you connect an HDMI cable, the audio will be output to the
projector.
2. Connecting a smartphone
Connect a phone with Android system:
(Note: check if your Android phone supports MHL function.) MHL-HDMI
cable not included)
1. Connect the projector and the Android smartphone with the
MHL-HDMI cable.
2. Choose the signal source: "HDMI"
VGA

4. Connect the soundbar
1. Use the supplied AV cable to connect the soundbar to the projector.
2. Turn on the projector and the sound bar.
Connect a phone with IOS system:
1. Connect the projector and iPhone with Lightning-to-HDMI cable (not
included)
2. Choose the signal source: "HDMI"
Connect with an Anycast:
1: Plug in Anycast with the micro usb port and another usb port to your
power adapter.
2: Connect Anycast to your Projector's HDMI port and switch the
Projector source to HDMI.
3: You will see the Anycast main menu on the Projector screen.
3.Connecting a DVD player
1. Use the supplied AV cable to connect the DVD player to the projector.
2. Turn on the projector and DVD player.
If your player has an HDMI output, it is best to use it over the analog (AV)
option. Audio output must be configured from the DVD player menu if
external speakers are installed.
(3-in-3 AV cable not included)
(3-in-3 AV cable not included)
AV
video
audio out
(L/R)
audio out
(L/R)

Starting the projector
Turn on the projector by connecting the supplied power cord to the outlet,
and then pressing the main power switch. The projector will go into standby
mode and the power indicator will light red.
Only after pressing the "POWER" button on the projector or remote control
will the power indicator turn green and the projector will become ready to
use.
Select the signal source:
Press the "source" button on the remote control or the projector and choose
between: "AV", "PC-RGB", "HDMI 1", "HDMI 2", "USB".
1. Adjust the image size to get the best image size by moving the projector
back and forth, then use the focus ring to get the best focus.
Select the language menu
Language menu you have to select it when you turn on the projector for the
first time, you will see the interface in English. You can select one of the
menu languages: German, French, Italian, Spanish, Japanese and so on.
Please follow these steps:
1. Press the "meun" button and find the "OPTION" interface, then find the
"OSD Language English".
2. Press the ENTER button to execute the selection.
①
Adjust the Tilt Base and Hang Ceiling
Adjust the tilt base:
Install the screws (included in the package) to place ①, lift the front edge of
the projector to the desired height, turn the presser foot and release the
button to lock the tilt base to the appropriate position.
Hang ceiling:
Please purchase the projector stand and 1/4 inch screw additionally.
Install the projector stand to place ②, and hang the projector on the ceiling.
( Note: You can install the Tripod Stand to the place ②)
②

Keystone and Focus
If the projected image is in a trapezoidal shape, it can be resolved by
Keystone correction. ( Do Manual Keystone Correction )
Note: If the Keystone correction fail to resolve image shape, please
reduce the vertical height of the projector in relation to the center of the
screen.
The projected image may be blurry or difficult to see, this is due to lack of
Focus adjustment with the lens, please follow the processes below to
adjust the Focus. ( Do Manual Focus, find the most sharpness picture on
the screen )
Note: It is normal when sharpness in the central, blur in the edge.
B
Keystone Correction
Manual Focus

Multimedia File Specification
Image Format
Audio Format
Support File Extension
JEPG, PNG, BMP, MPO .jpg / .png / .bmp
Doesn’t Support : Dolby AC3 / AAC, DTS, WMA, DivX, VC1, etc
Video Format ( Bit Rate up to 30~40 Mbs )
Doesn’t support : MSVC / CRAM , MP42, GMC, IV32, RLE, cvid, RV20,
DivX, RM,
RMVB, VC1, FLV , etc.
Support
MPEG1, MPEG2, LPCM, MP3
File Extension
.avi / .ts / .dat / .vob / .wav / .mkv /
.mp3 / .mp4 / .m4a
Support
MPEG1, MPEG2, H.263, H.264,
AVS, VC1, MJPEG, RV30, RV40,
HEVC
File Extension
.dat / .ts / .mp4 / .mpg / .mpeg /
.avi / .mkv / .mov / .wmv / .asf /
.flv / .3gp. / .3gpp / .tp / .trp

Setting the Main Menu:
Press the "MENU" button on the projector or remote control, there are 4
menu options: "Movie", "Music", "Photo", "Text".
OPTION Menu included Function
OSD Language
Restore Factory Default
Blending
OSD Duration
Blue Screen
Software Update (USB)
20 kinds of languages:English, France,
Italian, Spanish, Japanese etc
Reset
Off, Low, Middle, High
Off, 5Sec, 10Sec, 15Sec
On, Off
Update software
Choose a language
Reset the device to original
manufacturer settings
Adjust the sound quality
Adjust the on-screen display time
Adjust the background color of the screen
Update software
Option Menu

PICTURE MENU
PICTURE MENU Mode Function
Picture Mode Standard, Soft, User, Vivid
Adjusts the color temperature
Sound Menu Mode Function
Sound Mode
Balance
Auto Volume
Standard, Music, Movie, Sports, User
-50~50
On, Off
Adjust the sound mode
Adjust the balance degree
Automatic volume adjustment
Color Temperature
Aspect Ratio
Noise Reduction
Projection Direction
Reduce Display
Medium, Warm, User, Cool
Off, Low, Middle, High, Default
Front/Rear on Desk, Front/ Rear on Ceiling
75%-100%
Auto/ 4:3/ 16:9
4 image modes
Aspect Ratio lets you configure
how images are displayed
Adjust the Noise reduction mode
Adjust the projection direction
Reduce the projection size
HDMI Mode AV/PC
Sound Menu

Time Menu
Sleep Time Mode:Off, 10min, 20min, 30min, 60min, 90min
Projection Distance and Size
Please follow the data in chart below, to adjust the image size and the
distance. (Aspect Ratio: 16 : 9, Default)
The image size depends on the distance between projector and screen,
Thank you very much for purchasing the YABER Y60 projector.
Please read this instruction manual carefully before use. Also, please
keep it handy so you can check it at any time.
If you have any problem, please feel free to contact us
(Email: [email protected].), we will always try to offer you a
satisfactory solution.
Screen size
50”
72”
100”
120”
200”
Distance
1.52m
2.15m
2.93m
3.48m
5m

Précautions
Lisez attentivement ce manuel avant d’utiliser votre projecteur Y60 et
conservez-le à portée de la main pour pouvoir vous y référer ultérieure-
ment.
Garanties importantes
Ces consignes de sécurité garantissent la longévité de votre projecteur et
évitent les incendies et les chocs. Lisez-les attentivement et faites
attention à tous les avertissements.
Installation
1. Pour obtenir les meilleurs résultats, utilisez le projecteur dans une
pièce sombre.
2. Placez le projecteur sur une surface plane et plane dans un endroit
sec, à l'écart de la poussière et de l'humidité.
3. Ne placez pas le projecteur à la lumière directe du soleil, près d'appar-
eils de chauffage ou d'appareils dégageant de la chaleur.
4. L'exposition directe au soleil, à la fumée ou à la vapeur peut endom-
mager les composants internes.
5. Manipulez votre projecteur avec soin. La chute ou les secousses
peuvent endommager les composants internes.
6. Ne placez pas d'objets lourds sur le projecteur.
Source de courant
1.Le projecteur est conçu pour fonctionner avec une source de
Alimentation CA 110-240V ~ 50/60 Hz. Assurez-vous que votre source de
L’alimentation répond à cette exigence avant de tenter d’utiliser votre
projecteur.
2. Manipulez le cordon d'alimentation avec précaution et évitez de le plier
trop. Un câble endommagé peut provoquer un choc électrique ou un
incendie.
3. Si le projecteur ne sera pas utilisé pendant une période prolongée
temps, débranchez la fiche de la prise.
Nettoyage
1. Débranchez le projecteur avant de le nettoyer.
2. Nettoyez régulièrement le boîtier avec un chiffon humide. Si c'est très
sale, utilisez un détergent doux. Ne jamais utiliser de détergents forts ou
les solvants tels que l'alcool ou les diluants.
FR

01 Puissance
02 Touches fléchées
03 OK
04 Menu
05 Source
06 Retour
07 Entrée VGA
FR
08 IR
09 Entrées HDMI 1 / HDMI 2
10 Prise casque (3,5 mm) / entrée AV
11 Entrées USB 1 / USB 2
12 Prise de courant
13 Correction trapézoïdale
14 Mise au point manuelle
01
0807
02 03 04 05 06
09
10
11
AV
IR
13
VGA
14
12
Power Socket
Accessoires
1x Projecteur
1x Câble AV 3 en 1
1x Câble d'alimentation
1x Câble HDMI
1x Télécommande
1x Manuel de l'utilisateur
1x Nettoyage des lentilles
1x Base de support
Description du produit

( Remarque: lorsque vous utilisez la télécommande, dirigez-la vers
le récepteur IR. )
1. Alimentation: appuyez sur cet interrupteur pour allumer ou éteindre
2. Mute: active ou désactive le son
3. Bouton de transfert rapide
4. Bouton Rembobinage Rapide
5. Play Button: Lecture ou Pause
6. Touche OK: confirmer
7/8. Touches de volume: augmentation / diminution du volume
7/8/9/10. Touche Flèches: déplace le pointeur vers le haut, le bas, la
gauche et la droite
11. Source: Change la source du signal
12. Menu: Appeler ou quitter le menu principal du projecteur.
13. Exit
14. Précédent
15. Suivant
Description de la télécommande
01
04
06
08
11
14
02
05
03
07
10
09
12
15
13
SOURCE MENU EXIT
VOL- VOL+
OK
< >
< >

Précautions d'emploi de la télécommande
-Manipulez la télécommande avec précaution.
-Si la télécommande est mouillée, essuyez-la immédiatement.
-Éviter la chaleur et l'humidité excessives.
-Si vous n'utilisez pas la télécommande pendant une longue période,
retirez les piles. (Les piles ne sont pas fournies avec la télécom-
mande et sont à acheter séparément).
1.Ouvrez le capot arrière de la télécommande.
2.Installez des piles neuves (piles de type AA). Assurez-vous de
respecter la polarité des piles (+/-).
(Attention, veillez à ne pas mélanger différents types de piles et/ou des
piles neuves avec des piles usagées.)
Ajustez la base d’inclinaison & accrochez le plafond
①
②
Ajustez la base d’inclinaison: installez les vis (incluses dans l’embal-
lage) sur la position ①, soulevez le bord avant du projecteur à la hauteur
souhaitée, tournez le pied presseur et relâchez le bouton pour verrouiller
la base d’inclinaison à la position appropriée.
Suspendre le plafond: veuillez acheter le support de projecteur et la vis
1/4 pouce en plus.
Installez le support de projecteur sur la position ②et suspendez le
projecteur au plafond.
( Remarque: vous pouvez installer le support de trépied à l'endroit ②)

B
Correction de trapézoïdale et mise au point
Avant de démarrer le projecteur. Suivez la figure ci-dessous pour régler
la correction trapézoïdale. Gardez le projecteur vertical avec l’écran du
projecteur et maintenez-le au même niveau.
Si l'image projetée est de forme trapézoïdale, elle peut être résolue par
correction de trapèze. (Correction manuelle de la distorsion trapézoïdale)
Correction de trapézoïdale
Mise au point manuelle
Remarque: si la correction de la distorsion trapézoïdale ne parvient pas
à résoudre la forme de l'image, veuillez réduire la hauteur verticale du
projecteur par rapport au centre de l'écran.