Yamaha F3Y-K810B-V0 User manual

7/2019 F3Y-F84A9-V0_A MANUAL, INSTALL
EX BOW FIXED MOUNTED STORAGE
Page 1 of 3
©Yamaha Motor Corporation, U.S.A. All rights reserved.
INSTALLATION INSTRUCTIONS
DESCRIPTION: EX BOW FIXED MOUNTED STORAGE
PART NUMBER: F3Y-K810B-V0
MODEL: 2017~ EX WaveRunner®
Please read and understand these instructions
completely before installation to avoid possible
injury, or damage to the accessory or vehicle.
WARRANTY INFORMATION:
In the United States, see your Yamaha dealer for a copy
of the Genuine Yamaha Accessories Limited Warranty
statement.
DEALER OR INSTALLER:
These instructions contain important information for
future reference and must be given to the customer.
PARTS LIST:
No. Part Number Description Qty
-- F3Y-K810B-V0 EX Bow Fixed Mounted Storage* 1
* Part supplied with kit only and not available separately.

7/2019 F3Y-F84A9-V0_A MANUAL, INSTALL
EX BOW FIXED MOUNTED STORAGE
Page 2 of 3
©Yamaha Motor Corporation, U.S.A. All rights reserved.
PREPARATION:
• Ensure the WaveRunner is on a secure stand or trailer and level surface.
• Clean all mounting surfaces before beginning installation.
• It is recommended to have the factory service manual available for reference.
INSTALLATION:
3. Insert EX Front Bow Storage.
4. Insert plastic rivets, pressing the center down until
flush to lock.
2. Remove bow storage container.
1. Using a screwdriver, gently push down on the center of the rivet to unlock it.
Remove plastic rivets and retain for later installation.
Note: To prepare the rivets for re-use, gently press the center
of the rivet upwards such that it is proud of the top surface.

7/2019 F3Y-F84A9-V0_A MANUAL, INSTALL
EX BOW FIXED MOUNTED STORAGE
Page 3 of 3
©Yamaha Motor Corporation, U.S.A. All rights reserved.
CUSTOMER SERVICE:
For further information see your Yamaha dealer.
ESTIMATED TIME TO INSTALL: 0.2 HRS
5. Close the top and roll it down into the WaveRunner bow storage compartment.
6. Connect the plastic clip to ensure the space is waterproof.
MAINTENANCE:
Periodically, check the plastic rivets to ensure they are
connected securely.
CARE AND CLEANING:
Clean plastic parts with a clean soft cloth and mild soap
and water. Rinse and dry. Always rinse with freshwater
after salt water use.
USAGE NOTE:
The bow fixed storage will fit the EX WaveRunner cover. It
has a maximum capacity of 5 lbs (1.36kg). Do not put any-
thing sharp or pointy in the bow fixed storage to prevent
ripping the material.