Yard force Y0L120CGR User manual

Model: Y0L120CGR
OPERATOR’S MANUAL
Merotec Inc. 3655 Kennesaw North Industrial Parkway,
Kennesaw, GA 30144
Made in China at a SUMEC manufacturing facility.
READ & UNDERSTAND INSTRUCTION MANUAL.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE
REFERENCE.
120v Lithium-Ion Battery Charger
TM
120v
LITHIUM-ION
TM
120v
LITHIUM-ION
TM

120v
LITHIUM-ION
TM
2 3
PRODUCT FEATURES
1. Battery guide
2. Charger battery connector
3. Red LED lamp
4. Green LED lamps
5. Wall-mount holes
TECHNICAL DATA
Model Y0L120CGR
Input 100-120 V, 50/60 Hz, Max. 5.4 A
Output 120 V d.c. 4 A
Charger time Approx. 40 minutes
INTENDED USE
The battery charger Y0L120CGR only can be
matched for Yard Force 120V Li-ion battery pack
Y0L120BAT2.5.
WARNING SYMBOLS
Before any use, refer to the
corresponding paragraph in the
present manual.
The charger is for indoor use only.
Double insulation
Pole orientation
Protective 6.3A limited
Do not expose and operate the tool
in rain.
+-
T6.3A
TABLE OF CONTENTS
Product features ........................................................................................................................3
Technical data……………………………....................................................................................................3
Intended use……………........................................................................................…………......3
Warning symbols…...................................................................................................………………....3
Product description and specications…........……………………........................................................…..4
Safety notes…............................................................................................…………………………..4
Operation……………………………...........................................................................................…………5
Maintenance and service ......................................................................................…………………………5
Disposal .................................................................................................................................................5
Trouble shooting.........................................................................................................................6
Warranty .................................................................................................................................................7

120v
LITHIUM-ION
TM
4 5
PRODUCT DESCRIPTION AND
SPECIFICATIONS
WARNING!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, re and/or serious
injury.
Save these instructions for later use. Use the
Charger only when you fully understand and can
perform all functions without limitation, or have
received appropriate instructions.
SAFETY NOTES
1. Use only Yard Force 120V Li-ion battery
pack Y0L120BAT2.5. Do not use the original
charger on other li-ion batteries or on any
other type of battery—re or explosion may
occur.
2. Check the battery charger, cable and plug
each time before using. Do not use the
battery charger when defects are detected.
Do not open the battery charger yourself and
have it repaired only by qualied personnel
using original spare parts.
3. The charger is designed to use standard
household 100-120 V~ 50/60Hz power
source. The charger's plug must match the
outlet. Never modify the plug in any way.
Unmodied plugs and matching outlets will
reduce risk of electric shock.
4. Do not abuse the cord of charger. Never use
the cord for carrying, pulling or unplugging
the charger. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
5. Make sure the charger cord is located so
that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
6. Keep the battery charger clean.
Contamination may cause the danger of
electric shock.
7. Protect the battery charger away from rain
and moisture. The penetration of water in a
battery charger increases the risk of electric
shock.
8. Do not operate the battery charger on easily
inammable surfaces (e.g. paper, textiles,
etc.) or in combustible environments. There
is danger of re due to the heating of the
battery charger during charging.
9. The temperature range over which the battery
pack can be charged is typically from 41° F
to 113° F. Therefore, charging e󰀨orts outside
the prescribed temperature range may
automatically be blocked by the protection
circuitry of the battery pack. Longest life and
best performance can be obtained if the
battery pack is charged in the normal room
condition.
10. Disconnect charger from the power supply
when not in use. This will reduce the risk of
electric shock or damage to the charger if
metal items should fall into the opening.
11. This tool is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
12. Cleaning and user maintenance of the battery
charger shall not be made by children without
supervision.
OPERATION
Note:
- A new battery pack is supplied partially
charged.To ensure the best performance,
charge the battery completely before rst
use.
- Make sure the main voltage is the same as
rating label which is located on the charger.
- Remove the battery pack from the charger
after it has been fully charged.
1. Connect the charger to a power supply. The
red LED light on the charger will be on.
2. To insert the battery pack into the charger,
align the grooves on the battery pack with
the raised ribs in the opening of the charger.
Then press the battery pack downward with
a moderate force. (There is a carrying handle
at the top of the battery pack. Lift the handle
up for easy-transporting.)
3. Once the battery pack is correctly located
in the charger, the green LED light of the
charger will ash continuously during normal
charging, while the red LED light is still on.
4. When charging is complete, both green and
red LED light of the charger will be on.
5. If you encounter one of following kind of
situations, the red LED light of charger will
ash.
- Wrong communication. It refers to poor
connection between charger and battery
pack.
- Faulty with battery pack. It need be repaired
by the customer service center.
Wall-mount holes
The charger has hanging holes for convenient
storage. Install two screws horizontally in the
wall 4.2" (10.7cm) apart. Use screws su󰀩ciently
strong to hold the combined weight of the
charger and battery pack.
MAINTENANCE AND SERVICE
- Occasionally clean the charger using a soft,
clean and dry brush.
When the charger is no longer operative, please
refer to an authorized after-sales service centre.
DISPOSAL
Battery chargers, accessories and packaging
should be sorted for environmental-friendly
recycling.
Do not dispose of battery chargers into household
waste!
4.2" (10.7cm)

120v
LITHIUM-ION
TM
6 7
WARRANTY
Three- Year Warranty on 120vRX Battery Pack and Charger
FOR THREE YEARS from the date of original retail purchase, the Yard Force 120vRX battery pack and
charger are warranted against defects in material workmanship. Defective product will receive free repair.
Commercial use voids the warranty. This warranty does not cover accidental damage, unreasonable use,
normal wear and tear, neglect or non-compliance with the Operating, Safety and Maintenance Instruc-
tions.
All service, outside of normal maintenance as described in this manual, must be done by an authorized
service technician. Any unauthorized service or changes to the original conguration of this product
will void the warranty. All parts and accessories used on and with this product must be manufactured
and/or authorized by Merotec Inc., a SUMEC company. Warranty coverage is only provided on products
purchased from authorized Yard Force retailers. Warranty only applies to products purchased and oper-
ated in the USA. Any product purchased or operated outside of the USA is not covered by any warranty.
Service and Warranty Claims Process
Contact the Yard Force Support Center toll-free at [phone] Monday-Friday between 8:30 AM
and 5:00 PM Eastern Time for service and warranty support.
Yard Force Service Support agents can help you troubleshoot problems over the phone to get you back
up and running as quickly as possible. In the situation where service or warranty inspection is needed,
please follow these steps:
1. Call Yard Force at [phone] Monday-Friday between 8:30 AM and 5:00 PM Eastern Time.
2. Send in proof-of-purchase and serial number (if applicable) to conrm warranty Coverage as directed
by Yard Force.
3. If service or a warranty evaluation is requested, Yard Force will provide an RGA number that should be
used in all communications with Yard Force and is required to be indicated on the product itself and on
the outside of the box.
4. All shipments to Yard Force must have an RGA number. Any shipment received that does not have an
RGA number clearly marked on the outside of the box will be refused.
5. All shipments must be sent pre-paid, Yard Force does not pay for any shipping costs for service or
warranty evaluation. Yard Force is not responsible for any packages that are lost by carrier. We recom-
mend that shipments are made by a carrier that provides tracking and delivery conrmation.
For more information or to ask questions, please call toll-free [phone] Monday-Friday between
8:30 AM and 5:00 PM Eastern Time.
SAVE THESE INSTRUCTIONS
TROUBLE SHOOTING
Symptom Cause Corrective Measure
Battery pack can not be
charged
Battery not (properly) inserted Properly insert battery into battery
charger till the locking
mechanism clicks
Battery contacts contaminated Clean the battery contacts or replace
the battery
Battery pack defective Replace the battery
Charger no response when
power on
Mains plug of battery charger not
plugged in (properly)
Insert mains plug (fully) into the
socket outlet
Socket outlet, mains cable or
battery charger defective
Check the mains voltage; have the
battery charger checked by
an authorised after-sales service
agent for Bosch power tools
If you are unable to resolve the problem using the troubleshooting guide then please call the Yard Force
Customer Care Center at 866-902-9690 immediately.

Merotec Inc.
3655 Kennesaw North Industrial Parkway, Kennesaw, GA 30144
Copyright © 2017 Merotec Inc.
Made in China at a SUMEC manufacturing facility
MADE IN CHINA