Yard works Lss10163-1 User manual

Thank you for your purchase.

DO NOT RETURN THIS PRODUCT TO THE STORE. OPERATING, ASSEMBLY,

PARTS, SERVICE QUESTIONS? GO TO WWW.AMERICANLAWNMOWER.COM

OR CALL 1-800-633-1501 BETWEEN 8:00 AM—5:00 PM EST FOR

ASSISTANCE.

SAVE THIS MANUAL FOR FUTURE REFERENCE

WARNING: To reduce the risk of injury, the user must read and understand the owner’s manual

before using this product.

CA Compliant Charger Included (Model No. HYCH0500500U)

BATTERY MUST BE

CHARGED BEFORE FIRST

USE. TWO TO THREE INITIAL

CHARGING/DISCHARGING

CYCLES MAY BE REQUIRED

TO ACHIEVE MAXIMUM RUN

TIME/CAPACITY.

TOOL WILL NOT OPERATE

WHILE PLUGGED INTO

CHARGER.

Model LSS10163-1 | SKU# 267-3168

OWNER’S MANUAL

3.6V Lithium-ion Shrub Shear

With 3.2” Grass Shear & 6.3” Hedge Trimming Blade

TO REDUCE RISK OF INJURY: Before any use

be sure everyone using this product reads and

understands all safety instructions and other

information contained in this manual.

WARNING: Personal Injury and Damage! Keep

your hands and feet away from the cutting tool,

especially when the products are switched on!

Never adjust the cutting head when the product is

in the “on” position. Do not touch moving blades.

Save these instructions and review frequently prior

to use and in instructing others.

WARNING: When using electric appliances, basic

safety precautions should always be followed to

reduce risk of fire, electric shock, and personal

injury, including the following:

READ ALL INSTRUCTIONS

AVOID DANGEROUS ENVIRONMENTS - Do

not use this product in the rain or in damp or wet

conditions. Do not operate in gaseous or explosive

atmospheres. Motors in these products normally

spark, and the sparks might ignite fumes.

DRESS PROPERLY- Don’t wear loose clothing or

jewelry and wear protective hair covering to contain

long hair. They can be caught in moving parts.

Use of rubber gloves and protective footwear is

recommended when working outdoors.

USE SAFETY GLASSES - Wear safety glasses

with side shields or goggles that are marked to

comply with ANSI Z87.1 standard when operating

this product. Use face or dust mask if environment

is dusty.

DANGER: Risk of cut. Keep hands away from

blades.

USE RIGHT APPLIANCE - Do not use this product

for any job except that for which it is intended.

WARNING: Switch off before adjusting or cleaning.

CAUTION: The blades continue to move for a few

seconds after the tool is switched off.

AVOID UNINTENTIONAL STARTING - Do not carry

this product with finger on switch.

IMPORTANT! Any use which is not expressly

permitted in the manual may result in damage to

the tool and place the use in serious danger.

Please carefully read the restrictions in the

operating instructions.

IMPORTANT! Before each use check for damaged

or worn parts. Check for alignment of moving parts,

binding of moving parts, breakage, mounting and

any other condition that may affect its operation.

Any part that is damaged should be properly

repaired or replaced. For assistance call our

customer service help line at 1-800-633-1501.

STORE INDOORS-When not in use, this product

should be stored indoors in a dry location out of

reach of children.

STAY ALERT - Watch what you are doing. Use

common sense. Do not operate this product

when you are tired or under the influence of drugs,

alcohol or medications.

DANGER: If blade jams on any electrical cord

or line, DO NOT TOUCH THE BLADE! IT CAN

BECOME ELECTRICALLY LIVE AND VERY

DANGEROUS. Release the unit in the safest

manner possible. Disconnect the damaged

electrical cord or line from the power source. If

possible, do so safely, if in doubt, call an electrician

or the electrical contractor for assistance. Failure to

heed this Danger can result in serious personal

injury and possible death.

LIGHTING - Only operate this tool in daylight or

good artificial light.

DON’T OVERREACH - Keep proper footing and

balance at all times.

DANGER: Make sure trigger switch is off and

safety button is not pushed when clearing jammed

material from blades.

MAINTAIN TOOL WITH CARE-Keep blades sharp

and clean for best performance and to reduce the

risk of injury. Keep handle dry, clean and free from

oil and grease.

KEEP CHILDREN AWAY - All visitors, children and

pets should stay at a safe distance from the work

area.

WARNING: California Proposition 65:

This product contains chemicals known to the State

of California to cause cancer, birth defects or other

reproductive harm.

WARNING: Cancer and Reproductive Harm -

www.P65Warnings.ca.gov.

IMPORTANT SAFETY WARNINGS

GENERAL SAFETY

2

Model LSS10163-1

Precautions that involve your safety.

CAUTION! Read the instruction manual and follow the warning and safety instructions!

CAUTION! Always wear eye protection.

Do not use in rain or electrical storms.

WARNING! The cutting blades continue to move after switching off.

WARNING! Keep bystanders away.

Only use the battery charger indoors.

Battery charger contains a safety transformer.

Waste electrical products should not be disposed of with household waste. Please recycle

where facilities exist. Check with your Local Authority or retailer for recycling advice.

EXPLANATION OF SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper

interpretation of these symbols will allow you to operate the product better and safer.

3

Model LSS10163-1

CHARGING THE BATTERY

• The battery must be fully charged before using

for the first time. The charging time is 3 to 5

hours. (See page 5 for instructions.)

• The battery charger supplied matches the

lithium battery installed in the tool. DO NOT

use any other charger to recharge the tool.

• To protect the lithium battery against deep

discharging, when the battery is flat, the tool

will automatically switch off via a protective

circuit.

If the On/Off switch is used continually at this point,

the lithium battery can be damaged. Do not try to

continue to use the tool before recharging the

battery.

GENERAL SAFETY

FCC Warnings:

Please note that changes or modifications to this

product not expressly approved by the party

responsible for compliance could void the user's

authority to operate the equipment.

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the

following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and

receiver.

-- Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV

technician for help.

PRODUCT SPECIFICATIONS

Model: LSS10163-1

Input: 3.6V DC, 1.5 Ah -Lithium-ion battery

Battery capacity: 1500mAH -3.2 inch (80mm) grass shear blade width

No load speed: 1000 SPM -6.3 inch (160mm) shrub trimming blade cutting length

Charger (adaptor) input: 100-120V, 50/60Hz AC -5/16 inch (8mm) shrub trimming blade max. cutting diameter

Battery charging time: 3 - 5 hours -Tool-less blade changing system

4

Model LSS10163-1

PARTS LIST

1Grass cutter blade

2Blade release button

3Safety lock button

4On/Off trigger switch

5Shrub trimming blade

6Grass cutter blade guard

7Shrub trimming blade guard

8Battery charger

4

3

1

5

6

2

8

57

GENERAL INSTRUCTIONS

5

Model LSS10163-1

PACKING LIST

- Shear with Grass Cutter Blade Assembled

- Shrub Trimming Blade

- Blade Guards

- Battery Charger

- Operator’s Manual

UNPACKING

Carefully remove the product from the box. Make

sure that all items listed in the packing list are

included.

Inspect all items carefully to make sure no breakage

or damage occurred during shipping.

Do not discard the packing material until you have

carefully inspected and satisfactorily operated the

tool.

WARNING: If any parts are damaged or missing

please do not operate this product until the parts are

replaced. Failure to heed this warning could result

in serious personal injury. Call our customer service

help line at 1-800-633-1501 for assistance.

CHARGING PROCEDURE

1. Insert the charger cable into the charging inlet

on the tool.

2. Make sure the wall outlet in your home is normal

household voltage (AC120V, 60 Hz). Insert the

battery charger plug into the wall outlet.

3. The red LED charging indicator lights up to tell

you that the battery pack is on charge. The

battery is fully charged when the red LED

charging indicator is no longer lit.

 During the charging process, it is normal for

the handle of the tool to warm up.

 When not using the tool for extended periods,

disconnect the battery charger from the socket.

 When the trimming shears are charging, you

must not use them.

 Only charge the battery between 0°-37.8°C

(32°-100°F).

 After prolonged use, allow the battery to cool

down before recharging.

STARTING AND STOPPING

Starting:

1. Push the safety lock button and press the

on/off trigger switch at the same time.

2. Release the safety lock button.

Stopping:

1. Release the on/off trigger switch.

OPERATING INSTRUCTIONS

This product is intended for light trimming of

shrubs, hedges and lawn edges. Please note that

this tool is not designed for commercial, trade,

or industrial use. Only use this product for the

purpose specified in these instructions. Any other

use will void the warranty.

GRASS CUTTER BLADE

Use the grass cutter blade for cutting the edges of

lawns and small areas of grass in private gardens

and hobby areas.

The grass cutter blade is not intended for cutting

hedges of chopping material up for composting.

Edging

Guide the tool along the edge of the lawn.

After use install the blade guard.

Tips:

− Do not force the unit through dense growth, and

if the blades slow down, reduce your speed.

− Avoid trimming too close to dirt, sand or gravel,

as this could dull the blades and reduce the

cutting efficiency.

− Do not allow the blade to contact paved surfaces,

stones or garden walls, as this will rapidly wear

down the blade.

SHRUB TRIMMING BLADE

Use the shrub trimming blade for trimming and

shaping individual bushes, shrubs, and climbing

plants in private domestic and hobby gardens.

The shrub trimming blade is not intended for cutting

grass / edging.

Cutting shrubs

 Before using, check the shrubs for foreign

objects e.g. wire, etc.

 When using the tool hold it away from yourself

and stand in a secure position with your weight

evenly balanced on both feet.

 When cutting, move steadily along the line of

cut, so that stems are fed directly into the cutter

blades.

 After use, install the blade guard.

6

Model LSS10163-1

GENERAL INSTRUCTIONS

Recommended cutting/trimming times:

− Cut hedges in June and October.

− Cut evergreen hedges in April and August.

− Cut conifer and other fast growing shrubs

approximately every six weeks from May

through October.

CHANGING BLADES

CAUTION: Blades can cause injury. Wear gloves

when changing blades.

CAUTION: Do not press the safety lock button of

the shear during blade changes.

Removing the blades:

1. Press the blade release button and slide the

blade downward to remove as shown.

2. To attach the grass cutter blade, slide the

tab (see fig. 1) into the slot (see fig. 2) in the

housing. Align the gear pin (see fig. 2) with the

oval slot (see fig. 1) on the blade to make them

fit precisely. Push the blade cover plate upward

(see fig. 3) until you hear it snap closed. The

blade cover plate will be tightened to the unit

when it is started.

Oval Slot

3. To attach the shrub trimming blade, slide the tab

(see fig. 4) into the slot (see fig. 5) in the housing.

Align the gear pin (see fig. 5) with the oval slot (see

fig. 4) on the blade to make them fit precisely. Push

the blade cover plate upward (see fig. 6) until you

hear it snap closed. The blade cover plate will be

tightened to the unit when it is started.

Tab

Oval Slot

Fig. 1

Slot

Gear Pin

Fig. 2

Fig. 3

Tab

Fig. 4

7

Model LSS10163-1

MAINTENANCE / CLEANING / STORAGE

MAINTENANCE:

CAUTION: Blades can cause injury. Do not press

the safety lock of the shear during maintenance

work.

Note: To ensure long and reliable service, regularly

carry out the following maintenance:

 Check for obvious defects such as a damaged

or loose blade, housing, or components.

 If the tool should stop working properly, repair

should be carried out by a qualified individual,

using identical replacement parts.

CAUTION: Never clean the trimming shears in

water (especially running water), as there is a risk

of personal injury and damage to the shears.

To obtain good cutting results, always make sure

the blades are sharp, and clean them from time to

time with a soft dry cloth.

For easier operation and longer blade life, use light

machine oil to lubricate the trimming and grass

shear blades before and after each use.

Check the condition of the cutting edges of the

blades, and always immediately remove notches

and burrs caused by stones, etc.

There are no parts inside the equipment which

require additional maintenance.

CLEANING / STORAGE

 Clean the exterior of the tool thoroughly

using a soft brush and cloth. Do not use water,

solvents, or polishes.

 Remove all debris from the tool.

 After use, cover the blades with the guards

provided.

 Charge the battery 3 to 5 hours before storing.

 If the tool is to be stored for an extended period

of time or during winter storage, charge the

battery at least once every there months to

protect it from damage.

 Store the tool in a dry secure place out of reach

of children

 Do not place any other objects on top of the

tool.

 This tool must not be stored in temperatures

over 40°C (104°F) or under direct exposure to

sunlight.

 Do not store the tool in places with static

electricity.

GENERAL INSTRUCTIONS

Slot

Gear Pin

Fig. 5

Fig. 6

CALL US FIRST !!

Call us first with questions about operating or maintaining your cordless

shear at 1-800-633-1501 between 8:00 a.m. – 5:00 p.m. Eastern

Standard Time, or get assistance on americanlawnmower.com.

8

Model LSS10163-1

PARTS AND SERVICE

Always mention the model number when ordering kits/items for this tool.

No. Kit/Item Number Description QTY

1 RLSS10163-1grass shear blade kit with

blade holder

1

2RLSS10163-2shrub shear blade kit with

blade holder

1

3RLSS10163-25 charger 1

For parts or service, please call 1-800-633-1501 or visit us online at americanlawnmower.com.

Be sure to provide all relevant information when you call or visit.

REPAIR PARTS (KITS/ ITEMS)

The model/ serial number of this tool is found on a plate or label attached to the housing. Please

record the serial number in the space provided below.

MODEL NUMBER LSS10163-1 ___

SERIAL NUMBER_______________

NOTES

__________________________________________________________________

9

Model LSS10163-1

NOTES

__________________________________________________________________

10

Model LSS10163-1

American Lawn Mower Company

The Great States Corporation

7444 Shadeland Station Way

Indianapolis, IN 46256 USA

Phone 1-800-633-1501

www.americanlawnmower.com

In a continued commitment to improve quality, the Manufacturer reserves the right to

make component changes or design changes when necessary.

Rev. 10/13/2021

YARDWORKS WARRANTY POLICY

• Two (2) year limited warranty on Yardworks 3.6 volt outdoor power equipment and one (2) year limited warranty on Yard-

works 3.6 volt battery packs and chargers.

The Great States Corp. (GSC) warrants to the original owner that this Yardworks product and service part is free from defects in

materials and workmanship and agrees to repair or replace any defective product or part for the warranty period as stated above.

• Warranty voided if used for commercial or industrial purposes or any other improper use as determined by GSC.

• Warranty does not include repairs necessary due to operator’s abuse or negligence (including overloading the product beyond

capacity or immersion in water), or the failure to assemble, operate, maintain or store the product according to the instructions in

the owner’s manual.

• This warranty does not cover

 Wear items, including but not limited to - drive belts & gears, tines, cutting blades, mower blades, saw chains, mulching

blades, blower fans, spool covers, trimmer line, blower and vacuum tubes, guide bars, high pressure hoses, wheels, handles,

augers, worn bags, power cables, and other items subject to wear over time.

 Wear on batteries, including but not limited to – drops, wear and breakage on charger, exposure to extreme temperature

swings (hot or cold), battery left on charger too long, battery left uncharged for too long, and misuse or abuse of the battery.

• This warranty does not cover damage caused by cold, heat, rain, excessive humidity or other environmental extremes.

• This warranty does not cover normal deterioration of the exterior finish or normal wear and tear on the products including, but not

limited to scratches, cracks, dents, or damage caused by outside chemicals.

• This warranty is not transferable and only applies to new products sold directly from an authorized retailer. This warranty does not

apply to any product, new or used, purchased through unauthorized third-party channels. For information on authorized dealers,

contact our customer support hotline at 1-800-633-1501 (Mon-Fri 8am-5pm Est)

• Any incidental, indirect or consequential loss, damage, or expense that may result from any defect or malfunction of the products is

not covered by the warranty.

• The warranty does not include installation, assembly or normal adjustments explained in the owner’s manual. The expense of de-

livering the product to the vendor and the expense of returning the product or replacement parts to the owner is not covered by the

warranty.

Additional Warranty Limitations

Some states do not allow the exclusion or limitation on how long an implied warranty lasts, so the above limitation may not apply to

you. Products sold damaged or incomplete, sold ―as is, or sold as reconditioned are not covered under the warranty.

Damage or liability caused by shipping, improper handling, improper assembly, incorrect voltage, improper wiring, improper mainte-

nance, improper modification or the use of accessories and/or attachments not specifically recommended is not covered by this

warranty.

Proof of purchase, original dated sales receipt, must accompany all warranty claims.

For claims go to americanlawnmower.com or call our customer support hotline from 8am-5pm EST,

Mon-Fri at 1-800-633-1501

OWNER’S MANUAL

3.6V Lithium-ion Shrub Shear

With 3.2” Grass Shear & 6.3” Hedge Trimming Blade

Model LSS10163-1 | SKU# 267-3168

Yard Works LSS10163-1 User manual

Popular Power Tools manuals by other brands