Yates Y-Q5 User manual

1
Y-Q5
CONTACTLESS TEMPERATURE SCANNING KIOSK
Yates Protect Y-Q5 User Manual

2
Y-Q5
CONTACTLESS TEMPERATURE SCANNING KIOSK
Contents
Quickstart Guide...................................................................................................................................3
Configuration Login ..............................................................................................................................4
Property Settings..................................................................................................................................5
Face Parameter Settings.....................................................................................................................6
Temperature Measuring Settings........................................................................................................7
Personnel Information..........................................................................................................................8
Access Records....................................................................................................................................9
Visitor Information............................................................................................................................... 10
Software Settings................................................................................................................................ 10
General Settings................................................................................................................................. 11

3
Y-Q5
CONTACTLESS TEMPERATURE SCANNING KIOSK
Quickstart Guide Included Components
Display
Pedestal
Base
All Other Included Equipment
Allen wrench (2) ½ inch screws ¼ inch screws Electrical Cord
1) Select a location for your Yates Protect Q5
facial recognition and thermal scanner
A good location will be near an entrance and
an electrical outlet, with enough space for a
socially-distanced line to form. Please avoid
direct sunlight on the display.
2) Attach Base to Pedestal
Use appropriate Allen wrench and install the
½ inch screws from the bottom of the base
into the pedestal through the holes in the
base (see A on right for location)
3) Install Display
Thread Display cords through square
Pedestal cover (B) and washer (C) as
pictured. Connect ethernet and power cables
coming out of the bottom of Display (D) with
ethernet and power cables in Pedestal (E)
Use included Allen wrench to secure Display
to Pedestal with ½ inch screws
4) Plug included electrical cord at the bottom
of the Pedestal (D) into an outlet and wait one
minute
Your Yates Protect Q5 is ready to start
scanning
A
E
B
D
C
F

4
Y-Q5
CONTACTLESS TEMPERATURE SCANNING KIOSK
Configuration Login
Attach the mouse, right-click to change the settings or click the settings icon to verify the
password. The initial password is 123456

5
Y-Q5
CONTACTLESS TEMPERATURE SCANNING KIOSK
Property Settings
The attribute setting menu has seven different functions: Server connection, face
setting, temperature measurement setting, personnel information, passage record,
attendance record, voice setting, visitor information. (attendance record: you need to
open the attendance of general settings in software settings to enable this function)

6
Y-Q5
CONTACTLESS TEMPERATURE SCANNING KIOSK
Face Parameter Settings
Modify these configuration properties according to how you would like the Y-Q5 to
operate.
1) Monocular Live: After opening, it can filter out the recognition of photos and videos
2) Binocular living: Infrared camera is required for living body detection. This feature is
more accurate than monocular at detecting a living person, but the recognition speed is
slower, and the environment requirements are higher

7
Y-Q5
CONTACTLESS TEMPERATURE SCANNING KIOSK
3) Detection mode: When
the detection mode is turned on, only face detection will be performed, not recognition.
4) Face frame mirroring: When the face frame is on the main interface does not match
the face mirroring problem, you can adjust this here.
5) Living body threshold: The higher the value, the higher the living body requirement,
and the lower the pass rate. Conversely, the higher the pass rate, the lower the
requirement for a living person.
Temperature Measuring Settings
These settings can be configured to adjust the temperature taking settings.
1：Temperature measurement time: the temperature measurement result will be
displayed after a certain period of temperature measurement time is detected
2：Automatic calibration: set different time to compensate different temperature,
improve the accuracy of temperature measurement
3：Effective temperature: Only when the detected temperature is higher than this
temperature, the detection result will be displayed; otherwise, it will be intercepted

8
Y-Q5
CONTACTLESS TEMPERATURE SCANNING KIOSK
Personnel Information
Click the Add button to register personnel information locally

9
Y-Q5
CONTACTLESS TEMPERATURE SCANNING KIOSK
Access Records
The access record can view the access record, mode, temperature, time, and other
information of all personnel
Click "export" to export relevant information tracking record

10
Y-Q5
CONTACTLESS TEMPERATURE SCANNING KIOSK
Visitor Information
Basic information of visitors can be viewed
Software Settings
The property setting interface has 9 different functions, including general setting,
switching mode, timing switch on/off, screen brightness, volume setting, password
modification, test setting, device information and exit software

11
Y-Q5
CONTACTLESS TEMPERATURE SCANNING KIOSK
General Settings
You can turn on card swiping, attendance, door opening, human body induction,
stranger mode and save local information related settings according to your own needs
1: Sleep time:
The terminal will automatically enter the sleep screen saver interface if it does not
detect a face within this period of time
2: Closing time:
the time to delay automatic door closing after opening the door

12
Y-Q5
CONTACTLESS TEMPERATURE SCANNING KIOSK
Timing Switch On/Off
Click the regular on/off icon and click the Add button to add the daily or weekly regular
on/off time. Click Clear to clear the previously set timing on/off time.
Screen Brightness
Drag the small circle and click OK to adjust the screen brightness
The volume Settings
Drag the small circle to the position you want to adjust, and click OK to adjust the
volume
Change Password Modify exit permissions password