Yeastar Technology MyPBX U300 User manual

MyPBX U300
Extension User Guide
Version 1.1
Date: 2013.8.9
Yeastar Information Technology Co. Ltd

MyPBX U300 Extension User Guide
2/10
Contents
INTRODUCTION ................................................................................................................................ 3
1. MYPBX USER WEB INTERFACE ...................................................................................................... 3
1.1 Login................................................................................................3
1.2 Call Settings......................................................................................4
1.2.1 Follow Me Settings ...............................................................................................4
1.2.2 Call Waiting..........................................................................................................5
1.2.3 Do not Disturb (DND) ...........................................................................................6
1.2.4 Ring Out ...............................................................................................................6
1.2.5 Mobility Extension Number..................................................................................6
1.3 Voicemail..........................................................................................7
1.3.1 Voicemail Settings ................................................................................................7
1.3.2 Voicemail Management........................................................................................8
1.4 Call Recordings..................................................................................9
2. CONCLUSION .............................................................................................................................. 10

MyPBX U300 Extension User Guide
3/10
INTRODUCTION
Thanks for using MyPBX U300UserWeb Interface. This Guide would explain how to configure the
“Follow me” settings (in different cases such as, “No Answer”, or “When Busy”; whether transfer
the incoming call to voicemail or other phone number); how to configure Voicemail settings(such
as enable/disable voicemail service, set a voicemail password and enable/disable “send the
voicemail to an email address as an attachment” service); how to manage the extension’s
voicemail and call recordings.
1. MYPBX USER WEB INTERFACE
1.1 Login
The default user name and password to login the User Web Interface:
User Name: Extension number
Password: Voicemail Access PIN#
Note: If it’s unable to log in with default user name and password, please ask the
administrator to check if you have the authority to log in, or have the right user name and
password.
Figure 1-1 Login Page

MyPBX U300 Extension User Guide
4/10
1.2 Call Settings
In the Call Settings page, you could configure features like “Follow me”, “Call waiting”, “DND”,
and “Ring Out”.
Figure 1-2 Extension Settings
1.2.1 Follow Me Settings
1. Always
Always Follow Me is a service of MyPBX that allows the automatic unconditional transfer of
incoming calls to varying other destinations.
Enable Always checkbox selection activates the unconditional call forwarding service on the
current extension. The Transfer To displays the destinations where the incoming call from a
particular caller should be unconditionally forwarded to.
a. Transfer To choose voicemail, the incoming call will be unconditionally forwarded to
voicemail.
b. Transfer To choose Number, the incoming call will be unconditionally forwarded to other
extension, PSTN or mobile phone number.
Note: When Always Follow Me configuration is saved, the Ring Group and Call Queue services
will be disabled.

MyPBX U300 Extension User Guide
5/10
2. No Answer
No Answer Follow Me is a service of MyPBX that allows the automatic transfer of incoming calls
to varying other destinations when the called extension is unable to pick up the call. No answer
timeout is configured as the Ring Out.
Enable No Answer checkbox selection activates no answer call forwarding service on the current
extension. The Transfer To displayed the destinations where the incoming call from a particular
caller should be forwarded to if the called extension is unable to answer the call.
a. Transfer To choose voicemail, the incoming call will be forwarded to voicemail when there is
no answer.
b. Transfer To choose Number, the incoming call will be forwarded to extension, PSTN or mobile
phone number when there is no answer.
Note: When No Answer Follow Me configuration is saved, the Ring Group and Call Queue
services will be disabled.
3. When Busy
When Busy Follow Me is a service of MyPBX that allows the automatic transfer of incoming calls
to varying other destinations when the called extension is busy with another call.
Enable Busy checkbox selection activates the busy call forwarding service on the current
extension.
The Transfer To displayed the destinations where the incoming call from a particular caller
should be forwarded to when the called extension is busy.
a. Transfer To choose voicemail, the incoming call will be forwarded to voicemail when the callee
is busy.
b. Transfer To choose Number, the incoming call will be forwarded to other extension, PSTN or
mobile phone number when the callee is busy.
Note: When saving the When Busy Follow Me configuration, the Ring Group and Call Queue
services will be disabled.
1.2.2 Call Waiting
Call Waiting is used to receive an incoming call when already on a call. A ringing tone will be
heard by the caller and a special beeping will be heard on the phone by the MyPBX user when
the call arrives. To switch between the current call and the new incoming call use the
appropriate calling code.
Enable Call Waiting checkbox selection activates this service and makes it available for the
phone's handset.
Note: If the Call Waiting service is enabled, the Busy Call Forwarding service would be disabled
automatically.

MyPBX U300 Extension User Guide
6/10
1.2.3 Do not Disturb (DND)
Do Not Disturb service is used to turn off the phone bell. If it’s enabled, incoming callers will be routed to the
voicemail box (if enabled); otherwise they will be disconnected automatically.
1.2.4 Ring Out
Ring Out is used to define the ringing time of the extension. If the ringing time exceeds the
configured time, the extension would stop ringing.
1.2.5 Mobility Extension Number
Mobility Extension Number is used to enable the cell phone to work as a mobile extension. If a
cell phone number is set as the mobility extension number, once it calls MyPBX, the cell phone
would have all authority of extension. In this way, the user is able to check the voicemail, call the
other extension, PSTN or mobile numbers via cell phone.

MyPBX U300 Extension User Guide
7/10
1.3 Voicemail
Voicemail is used for the caller to leave a message to the called extension when it is unavailable
or busy. The voicemail would be stored in the extension’s voicemail box. When the caller
accesses the voicemail service, he will hear a voice prompt that remind him to leave the message
(This voice prompt could only be configured by the administrator). The max duration of each
voicemail is 15 minutes (The default value is 5 minutes).
1.3.1 Voicemail Settings
In the Voicemail Settings page, the extension user is able to set the password for voicemail
access (which is the login password of User Web Interface as well); Enable or disable to the
voicemail service; enable or disable “send the voicemail to an email address as an attachment”
service.
Set a new voicemail password: Enter the new password, retype it and click “save”.
Email Address: Enter the email address where the voicemail or fax would be sent to as an
attachment.
Enable Voicemail: Check the box to enable the voicemail service or uncheck to disable.
Enable Send Voicemail: Check the box to enable “send the voicemail to an email address as an
attachment” service or uncheck to disable.

MyPBX U300 Extension User Guide
8/10
Figure 1-3 Modify Voicemail Settings
1.3.2 Voicemail Management
In the Voicemail Management page, the extension user could play, delete or download the
voicemail, or move the voicemail from one folder to the other folder (e.g. New, Old, Family,
Work, Friends).
Play the voicemail: Select the voicemail the play and click “Play”. In the “Play” page, the user
could control the speed and volume.
Delete the voicemail: Select the voicemail to delete and click “Delete”, then the selected email
would be deleted.
Download the voicemail: Select the voicemail to download and click “download”.
Move the voicemail to another folder: Select the voicemail to move, select the folder to move to
(e.g. New, Old, Family, Work, Friends), and then click “move to”.
Figure 1-4 Voicemail Management

MyPBX U300 Extension User Guide
9/10
1.4 Call Recordings
In the Call Recording page, the user could play, delete and download the recording files.
Play the recording: Select the recording the play and click “Play”. In the “Play” page, the user
could control the speed and volume.
Delete the recording: Select the recording to delete and click “Delete”, then the selected email
would be deleted.
Download the recording: Select the recording to download and click “download”.

MyPBX U300 Extension User Guide
10/10
Figure 1-5 Recording Management
2. CONCLUSION
This User’s Guide only explains the configuration of call settings and voicemail settings;
management of voicemails and recordings for extension users. For more functionality and
advanced settings of MyPBX U300, please refer to the relative documents as below:
“MyPBX U300 Datasheet”
“MyPBX U300Quick Installation Guide”
“MyPBX U300 Administrator’s Guide”
[The End]