YEEUU K1 Plus User manual

K1 Plus User Manual
K1 Plus Sma Lock
Thanks for choosing our K1 Plus sma lock.
Please check the user manual carefully before
operation and installation.
Type-C Emergency
Power Po
Function Key
Setting Key
Type-C Emergency power po
lf in low power or the system died, please use Type-C
wire to connect to poable power bank and inse in
emergency power supply inteace. Then you can open
properly.
This procedure will delete all user codes associated with
the lock. Long-press the setting key by using a needle
when the power is on.After hearing the voice prompt,
please continue to press the key until restore the facto
settings.
Function key:turn on/o Passway mode
Setting Key: Sho click:Enter Setting mode
Long press:Restore default settings
Back handle
Front Hondle
keyboard operation instructions
Function Key
Setting Key
Function Key
Setting Key
Conrmation
Button
Exit

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Pa 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful inteerence in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inteerence to radio
communications.
However, there is no guarantee that inteerence will not occur in a paicular installation, If this equipment does cause harmful inteerence to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to t to correct the inteerence by one or more of the following measures:
□ Reorient or relocate the receiving antenna.
□ Increase the separation between the equipment and receiver.
□ Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
□Consult the dealer or an experienced radio/TV technician for help.
1. Operating the lock requires special environment. Please use it in specied eld technology
ranges. The long time overload and exceed usage will reduce the life length. Please keep your
nger clear and prevent this product from long time in sunshine when use it.
2.After a period of time, there will be di on the ngerprint reader and may aect normal use.
Please use soft cotton to clear the ngerprint reader. The ngerprint head and screen are the
fragile glass materials, please do not hit or touch by hard object.
3.If the lock voltage is insucient when open door, the lock will prompt with alarm sound and
red light ash. Please change the batte timely. Please do not use with mixed old and new
batte.
4.The lock handle is the necessa auxilia tool to open door. Please do not hang any heavy
object on the handle.
5. Please choose professional worker to install the door lock and follow with our installation
standard. Please do not disassemble this lock personally and take care of relevant label to
avoid unnecessa trouble for warranty.
6. Please register administrator ngerprint and keep the mechanical keys after lock is
installed well. When the ngerprint and password and other methods can't open door, you
can open door by mechanical key.
FCC ID:2AW72-K1PLUS
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this
device must accept any interference received. including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between
the radiator and your body.
Warning: Changes or modications to this unit not expressly approved by the pay responsible for compliance could void the user's authority to operate the equipment.
After installation, the current state is demo mode, any ngerprint or password can open the
door. You can t the system under the voice prompt.
Touch the
keyboard
Choose one way to unlock:
ngerprint/password
Please open
the door
The rst ngerprint or password you registered is the administrator. Subsequent registration
and deletions require administrator authorization.
Note:After successfully adding the administrator, the Initial password “123456” will
automatically lose eectiveness.
Registered administrator
2
There is no voice prompt when opening the door in
mute mode (retain light prompt). Other operations still
have voice prompts.
1.Select “Settings”
2.Turn on/o the “Mute Control” button
3.Succeeded
Turn on/o mute mode
4
1.Select “Settings”
2.Click “Language settings”, choose English or Chinese,
Press “OK” to conrm
3.Succeeded
Language settings
5
Demo mode
1
Click the Setting
key
Input initial password
“123456”
Press “1” to add a ngerprint,
Press “2” to add a password,
Press “#” to conrm
Input the ngerprint 6 times or input a 6-10
digit password, Press “#” to conrm
Administrator registration
successful
Long-press the setting key
Voice prompt:Keep pressing to reset
the lock
Keep pressing the setting key
Voice prompt:Preparing to reset
the lock
Release the setting keyDoor lock reset succeeded
Click the function
key
Voice prompt: The lock has been set
to lock/remain unlock Succeeded
Click the
Setting
key
Verify the administrator
ngerprint or password
Press “3” to delete a ngerprint,
Press “4” to delete a password,
Press “#” to conrm
Please enter the number “02-20”
to delete, Press “#” to conrm
Successfully deleted
Click the
Setting key
Verify the administrator
ngerprint or password
Press “1” to add a ngerprint,
Press “2” to add a password,
Press “#” to conrm
Input the ngerprint 6 times or input a
6-10 digit password , Press “#” to conrm
Successfully added
Note: 1.Fingerprint capacity is 20, Password capacity is 20.
2.Cannot register duplicate ngerprints or passwords.
Note: Unable to delete administrator information, number 01 is the administrator.
Note: You can set it on the App.Turn on the “Tuya” App and select Sma Lock K1 Plus.Click
“Settings” and turn on/o the “Auto Lock” button.
Any user can open the door in passway mode.
Note: If released in the second step,the door lock reset will be canceled.
This procedure will delete all user codes associated with the lock and the system will reve to
demo mode.
Click the
Setting
key
Verify the administrator
ngerprint or password
Press “5” to connect Bluetooth
device, Press “#” to conrm
Turn on the “Tuya” App and
the phone’s Bluetooth,Click
“Add device”
Sta adding Bluetooth
devices
Add successful
Note: If you have not registered administrator before binding the “Tuya ”App, please register
the administrator from the “Tuya ”App. The rst ngerprint or password you registered is the
administrator.
Before binding Tuya App, you can directly use the sma lock to add and delete users as well
as passwords. However, after binding Tuya App, operations for adding and deleting users
and passwords can only be peormed through the Tuya app.
Please download the “Tuya ”App from the App stores before using this function.
Registered user
3
Restore default settings
6
Bluetooth function
7
Delete user
4
Passway mode
5
Tuya App operation instructions
1. Select “Tempora code”
2. Choose the code type and enter a 6-10 digit password
3. Setting the eective time and expiration time
4. Click “Save” successful
Tempora code settings
2
1. Turn on the “Tuya” App and select Sma Lock K1 Plus
2. Turn right the key button to unlock
Unlock
1
1. Select “Member Management”
2. Choose the family member
3. Click the “+Add” to registered user ngerprint or code
4. According to the prompt, nish registration
Member Management settings
3