Yema LED GOLD User manual

LED WATCHES

A MODE
SET
B

BUTTON A (MODE)
MODES
At any state, press BUTTON A for LED backlight.
Press BUTTON A once to display Hour and Minutes.
Press BUTTON A twice to display the Month and Day.
Press BUTTON A three times to display the Seconds.
A MODE
SET
B

BUTTON B (SET) SETTINGS
When the LED light is on, press BUTTON B (SET) to
select items in the following order:
Then press BUTTON A to edit the flashing item.
12h / 24h format
Hour
Minute
Seconds
Year
Month
Day
A MODE
SET
B

MAINTENANCE
OF YOUR YEMA WATCH

• Avoid activities that may expose your watch movement to shocks.
• Never use chemicals to clean your YEMA watch. Use a microfiber cloth and wash the metal,
rubber, fabric bracelets and waterproof cases from time to time with a soft brush and soapy
water. We recommend that you do not use abrasive or corrosive products (solvents, detergents,
perfume, etc.).
• To change the battery, carefully un-screw the back cover of your YEMA LED. After the back cover
is opened, you can directly remove the battery with tweezers (preferably plastic tweezers). Put
the prepared battery into the watch in the correct positive and negative directions and screw
back the caseback cover.
A YEMA LED watch requires little maintenance. However, some
precautions must be taken to ensure the durability of your YEMA:

MODELS:
LED GOLD | YMHF15751AM
LED SILVER | YMHF1575AM

YEMA.COM
YEMA WATCHES reserves the right to modify the
models illustrated in this publication at any time.