YLI YK-568L User manual

tested
Germany
EMC
R
www.yli.cn We create security
YK-568L is an access controller with proximity card operation and code keypad operation,
supports 500 users, with vandal resistant function.
FEATURE
Model:YK-568L
INTRODUCTION
TECHNICAL DATA
Single Door KeypadW/ Noctilucence&Waterproof
Voltage
12VDC
Distant: 65mm
Adjustment: ASK (125KHz)
Compatible Card: All 26-Bit EM Cards
Built-in Proximity Card Reader
Input Current
Operating Temperature: -31 to 63
Operating Humidity: 0 to 95%
Environmental Parameter
Dimension: 120L*76W*27H(mm)
Weight: 0.55kg
Mechanical Parameter
Standby: 40mA (Not include other devices)
Max: 130mA (Not include other devices)
YK-568L has 2 Mode Common Mode & Secure Mode
A: Common Mode Just 1 code 500 cards),everybody can use this code(500 cards).
For example, in your sales office, there are 20 salesman, and they know each other, if
you install a YK-568L here, you can use the Common Mode, because all your salesman
know this code(500 cards). No need to consider this is secure or not.
B: Secure Mode in the condition of Secure Mode, any code/card can`t open the door.
For example, in holiday(off duty), when YK-568L is in Secure Mode, enter the code or
read the card, can`t open the door.
Change the Mode
When we produce YK-568L, the Mode is Common Mode, If need change Common Mode
to Secure Mode, or change Secure Mode to Common Mode, operate it as below:
1) From Common Mode to Secure Mode Press"secure code" #
2) From Secure Mode to Common Mode Press"secure code" #
Remarks Secure Code when we produce is 3838 P1

tested
Germany
EMC
R
www.yli.cn We create security
Code when we produce, please check as below:
Program Code 1234
Open Door Code 2580
Secure Code 3838
Change the Program Code,Open Door Code, Secure Code
1) Change Program Code In Common Mode, Press # 2 seconds Enter Program
Code(When we produce, the Program Code is 1234 3 New Program Code
# 2 seconds
2) Change Open Door Code In Common Mode, Press # 2 seconds Enter Program
Code(When we produce, the Program Code is 1234) 1 New Op en Door Code
# 2 seconds
3) Change Secure Code In Common Mode, Press # 2 seconds Enter Program Code
(When weproduce, the Program Code is 1234) 4 New Secure Code # 2 seconds
Add Code Card
Remarks: Must be in Common Mode
1) Code(1 group) Press # 2 seconds Enter Program Code Press 1 Enter New
Code # 2 seconds
2) Card(500 pcs) Press # 2 seconds Enter Program Code Press7 Enter3 digits
program number(from 001 to 500) Read Card # 2 seconds
Delete Code(Card)
Remarks: Must be in Common Mode
1)Code(1 group) Press #2 seconds Enter Program Code Press 1 Enter 0000 #
2) A: Card(500 pcs) Press #2 seconds Enter Program Code Press8 Enter 3
digits program number of this card #
B: Card(500 pcs) Press #2 seconds Enter Program Code Press8 000 Read
this card Enter Program Code #
OPERATION
INSTALLATION
A
B
A
1.Choose the best location before installation
2.Drill holes (check the below specification and diagram)
(1) .Install by 2 holes(A)
(2). The hole(B) is for wires
(3). Connect wires with circuit board through the hole(B)
(4). Fix the back cover tightly
(5). Fix the front cover tightly
123
456
789
0
#
3x4Matrix keypad
Case screw
Bell button
Mode LED Door LED
P2

tested
Germany
EMC
R
www.yli.cn We create security
Wiring Diagram
A: Connect Fail Secure Electric Lock B: Connect Fail Safe Electric Lock
Return to the factory setting(All data will be deleted)
Press # 2 seconds Program Code 0 Program Code #
LRB1 B2 AIAO
NO NC COM
NO
NC
COM
YK-568L
Electric lock
Power supply Release button
LRB1 B2 AIAO
NO NC COM
NO
NC
COM
YK-568L
Power supply Release button
Electric lock
P3