YO DABBA DABBA CLASSIC HYBRID User manual

YODABBADABBA.COM
602.753.2222
@YODABBADABBATOOLS ENAIL USER MANUAL
CLASSIC
HYBRID
WELCOME TO THE
PLEASE READ THROUGH THIS MANUAL BEFORE
ASSEMBLING AND ENJOYING YOUR NEW
ELECTRONIC NAIL. WE ARE HERE TO HELP WITH
ANY QUESTIONS YOU MAY HAVE.
YO DABBA DABBA
FAMILY
For more information visit:
@YoDabbaDabbaTools
Youtube.com/yodabbadabba
YoDabbaDabba.com
YO DABBA DABBA

UNIVERSAL JOINT
HEAT SHIELD
HEATING COIL
HYBRID QUARTZ DISH
NUT
LOW TEMP:
HIGH TEMP:
550-600℉
750℉+
*Do not exceed 900℉
TROUBLESHOOTING:
If the display box reads ‘E44’ there’s an issue with the
coil. A new coil will resume proper function.
DON’T:
Do not use the coil near fabrics or paper products.
Do not modify the control box.
Do not twist, stretch or try to manipulate the heating
coil cord.
This unit does not have an auto-off feature. Do not
leave the unit on unattended.
Do not leave the carb cap on the nail while the
heating coil is attached.
Do not attempt to clean the unit while powered on.
Do not operate around volatile or flammable
materials.
CAUTION:
This unit is a fire hazard, please operate with extreme
caution. The coil is capable of reaching upwards of 1,000℉
and can cause serious injury and burns, or permanently
damage property. Never leave on or unattended.
REGISTER:
Fill out this quick form to streamline any
warranty claims and receive a sticker pack
from us!
yodabbadabba.com/warranty
MAINTENANCE:
Check out our FAQ Page for tips on routine
maintenance and more information.
yodabbadabba.com/dabbing-resources/enail-faq
HOW TO ASSEMBLE
To attach the quartz dish to the titanium base: unscrew
the top nut, place the coil on the heat shield, secure the
hybrid dish, and screw the top nut back on. See the
illustration to identify parts.
Attach the coil to the control box by lining up the arrows
on each part.
Flip the red power switch on.
Use the up and down arrows to adjust the temperature
setting until the desired temperature is displayed. You
do not need to press the ‘Set’ button. Set is for factory
programming and is not needed for regular function.
Accidentally pressing the Set button will not harm the
device.
DO:
Ensure the coil is secure before use.
Keep the coil and unit away from liquids.
Allow the coil to fully cool, naturally, before handling
or storing.
Only use compatible Yo Dabba Dabba accessories.
Keep away from children and pets.
Know your state laws.
Grip the coil at the base when removing from the unit.
Due to environmental conditions the temperature
between the coil and nail can vary by 100 degrees.
*NOTE:
A. FLAT COIL
B. CONTROL BOX
A
B
C
D
E
WHAT’S IN
THE BOX
F
E. QUARTZ DISHES
F. CARB CAP
C. 6-N-1 HYBRID NAIL
D. POWER CORD