Yolink YS6801-UC/SM-SO301 User manual

Smart Power Strip
User Guide
YS6801- UC/SM - SO301

Contents
Introduction······························································1
Product Requirements·················································3
Features··································································3
Set Up Smart Power Strip·············································4
Using YoLink App with Smart Power Strip··························8
YoLink Control···························································13
Specifications··························································18
Maintaining the Smart Power Strip································16
Troubleshooting························································19
Customer Service & Warranty·······································20

Introduction
With independent control of 4 smart outlets and 4 USB ports, you can easily control lights
and home electric devices via YoLink App on your iOS or Android device.
1
POWER BUTTON
Plug in your device and control it
independently from your smartphone
OUTLET 1
USB PORT Charge your tablet,
smartphone or other devices.
Default is turned on
Turn on or off
YoLink Power Strip
OUTLET 2 OUTLET 3 OUTLET 4

Blue
At least one plug or USB ports is on.
Red
All plugs and USB is off.
Blinking Blue
Connecting to cloud.
Fast Blinking Blue
Set up connection with devices.
Fast Blinking Red
Remove connection with devices.
Blinking Red and Blue
Factory resetting.
Slow Blinking Blue
Updating.
LED light can show you the current status. See the explanation below:s
Red
The plug is on.
Red
The USB ports are on.
2

Features
Individual Control - Independently control 4 smart outlets and USB ports via YoLink App
on your iOS or Android device.
Timer & Schedule - Automatically turn on or off household appliance after or at a certain time.
Scene - One click control. Tap the scene button to Independently turn on or off 4 smart
plugs and action of other devices.
Automation - Set up rules for “If this then that” function.
Voice Control - Use Alexa or Google Assistant to control your devices with voice commands.
Product Requirements
1. A YoLink Hub.
2. A smartphone or tablet running iOS 9 or higher; Android 4.4 or higher.
Control from anywhere - Control your Smart Power Strip remotely via YoLink App on your
iOS or Android device.
YoLink Control - , turn on or off Power Strip No internet is required your Smart when you
set up your plug with a YoLink controller.
3

Set Up Smart Power Strip
Follow the steps below to set up your Smart Power Strip via YoLink App.
Step 1: Set up YoLink App
Get the YoLink App from the Apple App Store or Google Play.
4

If you don’t have a YoLink account, tap Sign up for an account and follow the steps
to sign up an account.
Open the App. Use your YoLink account to log in.
Step 2: Log in or sign up with YoLink account
5

Step 3: Add device to YoLink App
b. Room - Choose a room for Smart Power Strip.
a. Name - Name Smart Power Strip.
You can customize the name, set the room, add to/remove from favourite.
Tap the “ ” in YoLink App. Scan the QR Code on the device.
Tap the “Bind Device” to add the device to your YoLink account.
c. Favourite - Click “ ” icon to add/remove from Favourite.
6
a
b
c

Step 4: Connect to the cloud
Plug into an outlet and your device will connect to the cloud automatically.
Note
Make sure you hub is connected to internet.
7
Cloud
Internet

Using YoLink App with Smart Power Strip
Details
You can customize the name, set the room, add to/remove from favourite, check device history.
Tap the icon for each of the settings you want to
personalize.
d. History - Check history log for the Power Strip.
b. Room - Choose a room for Smart Power Strip.
a. Nam e - Nam e S mar t P owe r S tri p o r 4 outlet s
an d US B i ndi vid ually.
e. Delete - The device will be removed from your
account.
Tap the “ ” icon at the top-right corner to go to
details.
Tap the “Smart ” in App to go to its Power Strip
controls.
c. Favourite - Click “ ” icon to add/remove from
Favourite.
8
a
b
c
d
e

Timer
With YoLink App, you can set up a timer to turn on or/and off 4 outlets individually.
Tap “Timer” for timer setting.
Choose action from “ON”, “OFF”, or “ON then OFF”.
Set the timer duration in Hours and Minutes for
one or more plugs.
Note
One timer will run only once. You can set a new
timer after the timer has already run or once
you cancel it.
The timer here is running at device without internet.
Tap “ ” icon to save.
9
Tap the “Smart ” in App to go to its Power Strip
controls.

Schedule
You can create ON/OFF schedules to automate your plugged-in devices to work around
your home and work schedules.
Within the Add Schedule screen, set the time,
your preferred state (“ON”,”OFF” or “ON then
OFF”) for the connected device, and repeating
frequency.
Note
Tap “Schedule” to open the Schedule screen,
tap “ ” to add a new schedule.
Activate or deactivate the schedule at schedule
screen.
Swipe left each schedule to edit or delete it.
You can keep maximum 10 schedules at one time.
The schedule here is running at device without
internet.
You may try to add schedule at Automation
where you can add as many as you want. The
automation setting is saved in cloud.
Tap “ ” icon to save.
10
Tap the “Smart ” in App to go to its Power Strip
controls.

Scene
Set one-click control for multiple devices in your YoLink App. You only run a scene via your
YoLink App.
To set a Scene, you will be able to put one or more
devices under this scene, and define their actions
and/or states.
Tap “ ” to create your own Scene.
Tap “Smart” to switch to Smart Screen.
Swipe left any Scene order to edit or delete it.
To execute a Scene, you may tap any scene at
“Smart” or “Favourite” if you mark it as favourite.
Note
You must have at least one YoLink Device in order
to create a Scene.
11

Automation
Automation allows you to set up “If This Then That” rules so the devices could act
automatically.
Tap “Smart” to switch to Smart screen and tap
“Automation”.
To set an Automation, you will need to set a
trigger time, local weather condition, or choose a
device with certain stage as a triggered condition.
Then set one or more devices, scenes to be
executed.
Tap “ ” to create an automation.
12

YoLink Control is our unique “device to device” control technology. Under YoLink Control,
the devices can be controlled without internet or Hub. Device which send out command
is called controller(Master). Device which receive command and act accordingly is called
responder(Receiver). Controller and responder list will show you below.
YoLink Control
You will need to set it up physically.
YS6602-UC YoLink Plug
Responder List
YS6604-UC YoLink Plug Mini
YS5705-UC In-wall Switch
YS6801-UC Smart Power Strip
Continuously ..updating
YS6802-UC Smart Switch
YS7704-UC Door Sensor
Controller List
YS7705-UC Garage Door Sensor
YS7903-UC Leak Sensor
Continuously ..updating
YS3603-UC YoLink Remote
YS7804-UC Motion Sensor
YS6604-UC YoLink Plug Mini
YS5705-UC In-wall Switch
YS6704-UC In-wall Outlet
YS6801-UC Smart Power Strip
YS6602-UC YoLink Plug
13
YS6704-UC In-wall Outlet
YS6802-UC Smart Switch

Find a power strip as controller(Master). Hold the power button for 5-10 seconds,
the light will flash blue quickly.
After pairing succeed, the light will stop flashing.
Find another action device as responder(Receiver). Hold the power/set button for 5-10
seconds, the device will enter pairing mode.
When the power strip turns on, the responder will turn on as well. When the power strip
turns off, the responder will turn off as well.
Pairing
Find a power stripcontroller(Master) . Hold
the power button for 10-15 seconds, the light
will flash red quickly.
The above two devices will unpair by themselves
and the light stops flashing.
Unpairing
After unbundling, When the power strip turns
on, the responder will no longer turn on. When
the power strip turns off, the responder will no
longer turn off.
Find a Receiverresponder( ) action device. Hold
the power/set button for 10-15 seconds, the
device will enter un-pairing mode.
POWER BUTTON
14

YoLink Control Diagram
UNPAIRED
TURN OFFTURN OFF
OPENED
CLOSED
PAIRED
TURN ONTURN OFF
OPENED
CLOSED
15

Maintaining the Smart Power Strip
Firmware Update
Ensure our customer h a v e t h e b e s t u s e r e x p e r i e n c e . H i g h l y r e c o m m e n d y o u could
update our newest v e r s i o n fi r m w a r e .
Note
Only the Smart Power Strip that is currently
reachable and has an available update will be
shown in the Details screen.
The light will be slowly blinking blue during the
update and stop blinking when the update done.
Tap “Firmware”.
Tap the “ ” icon at the top-right corner to go to
details.
16
Tap the “Smart ” in App to go to its Power Strip
controls.

Factory Reset
Factory reset will erase all your settings and bring it back to default. After the factory reset,
your device will still in your Yolink account.
Hold the power button for 20-25 seconds until the LED blinks red and green alternately.
Factory reset will be done when the light stops flashing.
POWER BUTTON
17

Specifications
AC Power Output: 100 ~ 120V AC, 10A MAX (Resistive)
5V DC, 2.1A
Input: 100 ~ 120V AC, 60Hz
Environment: -30°C ~ 70°C (Humidity <90%)
USB Power Output:
18