PAGE2
07/98
ASSEMBLYINSTRUCTIONS
925 GYM
HAMMERTONE
MODEL # 5037 - UK CANADA
YORKBARBELLCOLTD
1450SOUTHSERVICEROADWEST
OAKVILLE,(TORONTO)ONTARIO,
CANADAL6L5T7
TEL: (905)827-6362
FAX: (905)827-9593
U.K.
YORKBARBELL(U.K.)LTD
CHURCHILLWAY
DAVENTRY,NORTHANTS
ENGLANDNN114YB
TEL:(01327)701800
FAX:(01327)706704
AUSTRALIA
YORKBARBELL(AUST.)PTY.LTD.
UNIT1,LOT 2
SWAFFHAMROAD,MINTO,
N.S.W.2566, AUSTRALIA
TEL:(02)96038444
FAX:(02)96038555
Beforeassembly
This must be read before you start assembling this unit.
Great care has been taken in design and how to assemble this unit.
All bags of nuts and bolts have been packed with ease of assembly in
mind. You must follow the assembly instructions exactly as outlined.
You will need at least one person to help you assemble this unit, two
would be better. Assemble this unit starting at the beginning and work
to the end. The assembly instructions are set out so that you are only
doing one section at a time, therefore you will finish one section and
move on to the next. Do not do what most people do, when all else
fails they read the assembly instructions. If something is missing when
assembling this unit, you must notify us of the part number of the exact
nut, bolt or part that is missing and the colour of the model you
purchased.
To help you assemble this unit we have used line drawings. Check the
line drawings for the exact positioning of the parts.
This unit will need to be checked at least once a week for wearing wire
ropes, nuts and bolts that can work loose, upholstered pieces working
looseandwearonpivotassemblies.
WARNING:WIREROPESDOWEAROUT!!
The way to check the wire ropes is to run your fingers lightly along
them and if you start to feel they are frayed, please write to use for
replacements. This is for your own safety.
WARNING:YOUARERESPONSIBLEFORYOUROWNSAFETY!!
If the box containing the parts for the 925 gym was unopened
when you purchased it and there is a shortage, please notify us by
mail and send a copy of your receipt. If the box was opened and there
is a shortage, the dealer is responsible. Please indicate to us the part
number which is missing and we will return the missing part by return
mail.
TOOLSNEEDEDTOASSEMBLECOMPACT925GYM:-
a) wrenches :- 2 x 9/16" 14mm
2 x 3/4" 19mm
1 x 5/8" 16mm
1 x 1/2" 13mm
1 x 7/16" 11mm
b) large screwdriver c) hammer
PLIERSSHOULDNOTBEUSED!!
Thismachine should beassembled finger tightinthe beginning to
allowforproperalignment.
Warnings:
Consult your doctor before participating in this or any exercise program
Never lift weights alone. There should always be someone readily available
to help in case of difficulty.
Ensure that all nuts and bolts are fully tight before using any exercise equip-
ment.
Alwayswearsuitableclothingandfootwear e.g.tracksuitandtrainingshoes.
Childrenshouldnotbeallowedonoraroundthemachineryorequipment,even
when not in use.
Do not eat large meals before exercising.
Always warm up well before exercising as this will prevent muscle strain.
Remove jewellery, rings, chains and pins before exercising.
Check for full engagement of locking pins.
WARNING:
Always hold the weight stabilizer pin with one hand when you are
changing the weight selector pin. This is a safety precaution.
WARNING:
It is very important that you do not throw out or destroy these assembly
instructions as you never know when you will move or wish to relocate
this unit. These must be kept on hand for future reference.
EXTRATRAININGRESISTANCE
This unit incorporates a multiplying system which increases the weight
resistance up to 50% on the PRESS and PEC exercises.