YOTRIO MS18-301-004-01 User manual

Warranty Coverage Requirements:
1. Copy of your Original Store Receipt.
2. Pictures of the damaged parts.
3. You must know the name of your product and any corresponding item
numbers as well as the name of the store where you purchased the item.
4. Please gather all of this informa on BEFORE you call customer service.
DO NOT RETURN TO RETAILER
IF YOU HAVE ANY QUESTIONS OR CONCERNS
PLEASE VISIT OUR WEBSITE
AT:
www.yotrioint.com
www.yotrioint.com
www.yotrioint.com
www.yotrioint.com
OR TOLL FREE AT:
1-866-905-4107
1-866-905-4107
1-866-905-4107
1-866-905-4107
MONDAY-FRIDAY 8:30 AM TO 5:00 PM PACIFIC STANDARD TIME / 11:30
AM TO 8:00PM EASTERN STANDARD TIME
YOTRIO
YOTRIO
YOTRIO
YOTRIO CUSTOMER
CUSTOMER
CUSTOMER
CUSTOMER CARE
CARE
CARE
CARE
1

CARE AND MAINTENANCE
Before using, wipe the product completely with a so , dry cloth.
Spot-clean Cushions and slings using a sponge, mild soap and water. Rinse thoroughly with clean water. To
prevent mildew, allow to air dry completely before using or storing.
Never machine wash or tumble dry cushions, slings or umbrella covers as this will result in shrinkage or
damage.
Rinse wicker furniture with a hose or pressure washer. If the wicker is really dirty, you can use mild
soap with water. Allow to dry completely before using or storing.
To clean your umbrella, use a brush and mild soap and water. Allow to dry completely before
storing.
Avoid placing hot objects directly onto table top surface without a heat protector.
Always store and/or cover your pa o furniture in a cool dry place when not in used and away from direct
sunlight.
When storing, never wrap cushions in plas c. Plas doesn't allow the cushion to breathe and can cause it
to mildew if there's any moisture present.
Always place your o furniture away from fire, extreme heat, freezing condi ons and inclement weather
such as rain, hail, sleet, snow or wind.
Never use bleach or strong solvents to clean as this will cause damage to both fabric and metal finishes.
Do not allow water to build up in frames as this will cause corrosion and damage.
ONE-YEAR FRAME AND ONE-YEAR FABRIC/WICKER/FINISH ETC. LIMITED WARRANTY
You must retain the original receipt to obtain warranty service.
Frames are warranted against defects in materials and workmanship for a period of one year from the date
of original purchase.
This warranty does not cover damage to frames or welds due to commercial use, improper assembly, acts
of nature, fire, freezing and abusive use.
Rust, corrosion, and/ or rust stains are not covered by warranty.
Purchased parts are not covered under this warranty.
Fabric on cushions, slings and umbrella is warranted one year against separa on at the seams.
Fading, mildew, and color discolora n due to exposure to the elements, chemicals and spills are not
covered.
The Powder coat and/ or paint are warranted one year against blistering, peeling, or crackling.
Fading due to exposure to elements, chemicals and spills is not covered. Scratches and chips due to normal
wear and use are not covered.
Wicker Weave are warranted one year against breakage, separa on, or tearing.
Fading or discolora on due to exposure from chemicals, spills and/ or the elements is not covered.
Warranty covers free replacement of item within one year of purchase. A the one year it remains the
customer's responsibility for freight and packaging charges to and from our service center.
We do not compensate the individual or any outside party for assembling or disassembling the product.
Any replacement of warranted items will be in the original style and color, or similar style and color if the
original is un-available or has been discon nued.
Ques ons, problems, missing parts? Before returning to your retailer, call our customer service department
at [phone], 8:30 a.m. – 5:00 p.m. PST /11:30 a.m.- 8:00 p.m., EST, Monday- Friday.
2

Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at (866) 905 - 4107, 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
NOTE: The M8 bolt cover (GG), M6 bolt cover 1 (HH), M6 bolt cover 2 (II)
in step 1 to 6 are only for reference. Please attach them to bolts in step 7.
Package Contents
3
Walmart Assembly Instruction
MS Two Person Swing
Stock# MS18-301-004-01 / MS18-301-004-03

Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at (866) 905 - 4107, 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
4+1
4+1
14+1
FF
2
1
AA
BB
CC
EE
A1
B2
C2
D1
E4
F1
G
H
2
I
2
J1
K2
4
DD
GG
1
2+1
HH
II
JJ
KK
LL
MM
4+1
34+1
16+1
4+1
18+1
16+1
PART
NO. DESCRIPTION QTY
PICTURE
Seat&back
Top bar
Front leg
Rear leg
Leg connector
Foot cap
Arm
Short hanging bar
Long hanging bar
Canopy
Knob
M8x40 bolt
M6x70 bolt
M6x50 bolt
M8 washer
M6 washer
M6 nut
M8 Bolt Cover
M6 Bolt cover 1
M6 Bolt cover 2
Plastic washer
Hook
Allen wrench
Wrench
NOTE: The M8 bolt cover (GG), M6 bolt cover 1 (HH), M6 bolt cover 2 (II)
in step 1 to 6 are only for reference. Please attach them to bolts in step 7.
4
Walmart Assembly Instruction
MS Two Person Swing
Stock# MS18-301-004-01 / MS18-301-004-03

tighten by hand.
.dnahybnethgitylesooL
ylesooL.erutcipehtninwohssa)FF(tun6Mehtdna)EE(
Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at (866) 905 - 4107, 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
C
D
C
HH
BB
EE FF
II
2X
EE
NOTE: The M8 bolt cover (GG), M6 bolt cover 1 (HH), M6 bolt cover 2 (II)
in step 1 to 6 are only for reference. Please attach them to bolts in step 7.
A
C
E
B
B
C
E
E
E
CC
HH
EE FF
II
2X
EE
Step 1:
Insert the front leg (B) and the rear leg (C) into the top bar
(A), Connet with the M6 x 50 bolt (CC), the M6 washer
Insert the foot cap (E) into the leg (B&C).
Step 1
Step 2
Step 2:
Attach the leg connector (D) to the rear leg (C), using the
M6 x 70 bolt (BB), the M6 washer (EE) and the M6 nut (FF)
as shown in the picture.
5
Walmart Assembly Instruction
MS Two Person Swing
Stock# MS18-301-004-01 / MS18-301-004-03

Loosely tighten by hand.
C
I
B
B
C
I
HH
CC
EE FF
II
HH
CC
EE
FF
II
2X
2X
EE
EE
F
G
G
CC
HH
EE JJ
GG
AA DD
GG AA DD
2X
2X
G
GF
Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at (866) 905 - 4107, 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
NOTE: The M8 bolt cover (GG), M6 bolt cover 1 (HH), M6 bolt cover 2 (II)
in step 1 to 6 are only for reference. Please attach them to bolts in step 7.
Step 3
Step 4
Step 3:
Connect the front leg (B) and rear leg (C) with the
long hanging bar (I). using the M6 x 50 bolt (CC), the
M6 washer (EE) and the M6 nut (FF) as shown in the
picture.
Fully tighten all bolts from step 1 to 3 with Allen
wrench (LL) and wrench (MM).
Step 4:
Attach the arm (G) to the back of seat & back (F),
using the M6 x 50 bolt (CC), the M6 washer (EE) and
the plastic washer (JJ).
Attach the arm (G) to the seat, using the M8 x 40 bolt
(AA) and the M8 washer (DD).
6
Walmart Assembly Instruction
MS Two Person Swing
Stock# MS18-301-004-01 / MS18-301-004-03

Loosely tighten by hand.
Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at (866) 905 - 4107, 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
NOTE: The M8 bolt cover (GG), M6 bolt cover 1 (HH), M6 bolt cover 2 (II)
in step 1 to 6 are only for reference. Please attach them to bolts in step 7.
KK
A
Step 6:
Hang the hook (KK) in the holes on the top bar (A).
Step 5
Step 6
Step 5:
Attach the long hanging bar (I) and the short hanging bar
(H) to the arm (G), using the M6 x 50 bolt (CC), the M6
washer (EE) and the M6 nut (FF).
Bring the holes in the free ends of hanging bars (H & I)
together and thread them onto the hook (KK).
Fully tighten all bolts from step 4 to 5 with Allen wrench
(LL) and wrench (MM).
7
Walmart Assembly Instruction
MS Two Person Swing
Stock# MS18-301-004-01 / MS18-301-004-03

Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at (866) 905 - 4107, 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
NOTE: The M8 bolt cover (GG), M6 bolt cover 1 (HH), M6 bolt cover 2 (II)
in step 1 to 6 are only for reference. Please attach them to bolts in step 7.
Step 7:
Attach the canopy (J) to the top bar (A)
Insert the knob (K), turning the knob (K) clockwise tightly.
Ensure all connections are secure before use.
Attach the M8 bolt cover (GG), M6 bolt cover 1 (HH), M6 bolt cover 2 (II) to all bolts as shown in previous
pictures.
Step 7
8
Walmart Assembly Instruction
MS Two Person Swing
Stock# MS18-301-004-01 / MS18-301-004-03