Youcan Robot BW Space Pro User manual

BW Space Pro
Quick Start Guide
快速入门指南
クイックスタートガイド

Contents
目录
目次
01-08
09-15
16-22

• Contents
Product List
Charging Guide
Download Youcan Dive APP
Quick Start
Using the Remote controller-Advance
Using the Remote controller-Simple
Use attention and Safety matters
Contact Us
• 目录
产品清单
充电指导
下载 Youcan Dive APP
快速启动
遥控器的使用 - 增强版
遥控器的使用 - 简约版
使用安全及注意事项
联系我们
• 目次
製品リスト
充電について
Youcan Dive APP のダウンロード
クイックスタート
アドバンスコントローラーの使用
シンプルコントローラーの使用
ご使用上の注意と安全事項
お問い合わせ
01
02
03
03
04
06
08
08
09
10
10
11
12
13
15
15
16
17
17
18
19
20
22
22

01
Product List
BW Space Pro
Underwater Drone
Remote Controller-Advance
Remote Controller-Simple
Wire Spool
WiFi Repeater
Charger
Sealing Lubricant and
Sealing Ring
1
2
3
4
5
6
7
1
1
3 4 5
6 7
2

02
Charging Guide
・Charging of BW Space Pro and WiFi Repeater
Plug one end of the charger with 4-pin hole connector into the Charging Port of
WiFi Repeater and BW Space Pro, and the other end connect to the power supply
to start charging.
When connecting the device,
align the jack and turn the nut until
it is tightened; when unplugging the
connector, unscrew the nut until it can
be pulled off.
Please keep the connector dry. It is
prohibited to touch the connector front
end with wet or sweaty hands.
• The light is red when charging;
• The light turns green when the
charging is completed.

03
・iOS
・Andriod
1.Log in to the Google Play to download.
2.Visit www.youcanrobot.com/support or scan the QR code
right to download directly.
· Youcan Dive APP supports Android 6.0 and above systems.
Quick Start
Connecting communication tether
Plug the 4 pin hole connector at one
end of the communication tether into
the host communication tether socket of
BW Space Pro, plug the other end into
the WiFi Repeater, and then tighten the
connector clockwise.
1
tighten the
connector
Download Youcan Dive APP
Log in to the App Store to download or scan the QR code
right to download directly.
· Youcan Dive APP supports iOS10.3 and above systems.
iOS
Android
1
1
The Safety Ring greatly reduces the load and stress on the cable
connector and can prevent any possible damage to the machine, thus it is
mandatory/compulsory to attach the cable securely and correctly onto the
Safety Ring located at the end of the machine .

04
Open Youcan Dive App
After the WiFi connection is successful,
open the Youcan Dive APP, connect the
device, select BW Space Pro, enter directly
or log in by account. After the connection
is successful, slide to the right to unlock,
and the boot is successful. At this point, you
can use the APP to control the underwater
movement and shooting of the drone.
In case of start failure, please check if the following conditions exist:
If the device is appropriately powered;
If the connector of the tether is connected to the jack of the BW Space Pro or WiFi
Repeater appropriately;
Access the mobile phone WiFi connection interface and check if the WiFi Repeater
signal is successfully connected.
3
Slide to Unlock
Back Home
Using the Remote controller-Advance
Charging for the Remote Controller
Connect the USB to the charging interface
of the remote controller. The power indicator
blinks, indicating that it is being charged.
1
Charging
interface
Connect to WiFi
Access the mobile phone WiFi
connection interface, select Youcan-****-
5G(Recommended) or Youcan-****, enter
the password: 12345678.
2

05
1. Power on, shortly press the power button
first, then long press it again until the
indicator light lights up, you will hear the
sound of beep, turn on successfully.
2. Put the phone or tablet on the holder.
When the Android device is paired with the Remote control for the
rst time, please enter the pairing password: 1234.
Connect the Remote controller and mobile phone
Control the BW Space Pro underwater movement and shooting with the remote
control. After the quick start step is completed, follow the process below:
2
3. Select settings-Stick control mode-A in
the Youcan Dive APP.
Battery indicator
AB
C
D
E
G H
F
A
B
C
D
Camera Settings
APP
Control Settings Control Mode BControl Mode A
Key Settings

06
Connect the Remote Controller and mobile phone
Control BW Space Pro underwater movements and shooting with remote controller.
After the quick start step is completed, follow the process below:
2
1. Connect Smartphone or Tablet
• Android
Press the POWER+W button for 3-5
seconds at the same time and the light will
be on, indicating a successful startup. At
this time, the working mode indicator 1 will
be ashing.
• iOS
Press the POWER+T button for 3-5 seconds
at the same time and the light will be on,
indicating a successful startup. At this
time, the working mode indicator 1 will be
ashing.
Using the Remote controller-Simple
Charging for the Remote Controller
Connect the USB to the charging interface
of the remote control. The POWER indicator
blinks, indicating that it is charging; The
POWER indicator is on, indicating the
charging is completed.
1
Charging interface
POWER
T
W
indicator 1
indicator 2
Youcan Robot

07
Power indication: when the power of the remote controller is lower than 30%,
all the lights will ash.
This remote controller only supports mobile phones, not tablet computers.
Usage of the holder:
1.Turn the nut, unlock the mobile phone
holder and pull up.
2.Fix the holder on the remote controller
and lock it through PUSH button.
3.Turn the nut in the opposite direction
again to fix the mobile phone holder and
put the mobile phone on it.
Note: After successfully connecting the Android phone, the working mode
indicator 1 stops ashing and turns on;
After successfully connecting to the iOS phone, the working mode indicator 2
stops ashing and turns on;
2. Select Control settings-Stick control
mode-B in the Youcan Dive APP, and
when the remote controller vibrates, the
connection is successful.
PUSH
Camera Settings
Control Settings
Key Settings
APP Control Mode A Control Mode B

08
Use attention and Safety matters
Youcan Robotics(Shanghai) Co.,Ltd.
Website：www.youcanrobot.com
Store：store.youcanrobot.com
Customer service：[email protected]
Telephone：[phone]
Facebook：YouCanWaterDrone
Instagram：youcanrobot
Youtube：Youcan Underwater ROV
Contact Us
Make sure the tether is
securely connected to
avoid short circuit
Wipe the water stain
around the connector
in time to keep it dry
Please avoid using the
drone in the waters with
too much water plants
After use, rinse with
fresh water to prevent
salt crystallization
The lens is a
fragile part,
do not beat
Operating
temperature is
-10 ° C ~ 40 ° C
Do not put the
WiFi Repeater
into the water.
Minors should
be accompanied
by parents
Do not use heavy force
or pulling hard on cables
and connectors
Attach the cable
securely onto the
drone's Safety Ring

09
物品清单
1
1
3 4 5
6 7
2
BW Space Pro 水下无人机
遥控器 - 增强版
遥控器 - 简约版
线缆盘
WiFi 基站
充电器
密封润滑油和密封圈
1
2
3
4
5
6
7

10
充电指导
・BW Space Pro 和 WiFi 基站充电
将充电器带有 4 针插孔的两个连接头分别插入 BW Space Pro 和 WiFi 基站充电接口，另
一端插入电源插座，开始充电。
连接设备时，请先对准插孔，再旋转螺母，
直至拧紧为止；
拆卸连接头时，先旋开螺母，再拔出插孔。
请保持连接头干燥，禁止手上带汗或水触摸
连接器前端接口。
• 当电源指示灯呈红色时候，提示
正在充电中；
• 电源指示灯变绿色，提示充电已
完成。
下载 Youcan Dive APP
・iOS
・Andriod
登录 APP Store 下载或扫描右侧二维码直接下载。
* Youcan Dive APP 支持 iOS10.3 及以上系统。
iOS
Andriod
1. 登录 Google Play 下载。
2. 访问 www.youcanrobot.com/support 或扫描右侧二维码直接下载。
* Youcan Dive APP 支持 Android 6.0 及以上系统。

11
1
快速启动
连接通讯线缆
连接 WiFi
将线缆的 4 针插孔接头一端插入 BW Space
Pro 通讯线缆接口，另一端插入 WiFi 基站，
顺时针拧紧接头。
防丢环可以大大减轻线缆连接头的承受
力，在入水前务必将线缆上的安全钩连接在
机器尾部的防丢环上，以免线缆或者机器连
接头损坏。
顺时针
拧紧
进入手机 WiFi 连接界面，选择 Youcan-****-
5G（ 推 荐 ） 或 Youcan-****， 输 入 密 码：
12345678。
1
2
进入 Youcan Dive App
WiFi 连接成功后，打开 Youcan Dive APP，连
接设备，选择 BW Space Pro，直接进入或账
号登录，待连接成功之后，向右滑动解锁，开
机成功，此时，您就可以通过 APP 来操控无
人机水下运动和拍摄了。
若开机失败，请检查是否存在以下情况：
请检查设备是否有电。
请检查通讯线缆的接头与 BW Space Pro 或 WiFi 基站的插孔是否接入正确位置。
进入手机 WiFi 连接界面，检查 WiFi 基站信号是否成功连接。
3
1

12
遥控器的使用 - 增强版
遥控器充电
连接遥控器和手机
将 USB 连接至遥控器充电接口，电量指示
灯闪烁，提示正在充电中。
通过遥控器来操控 BW Space Pro 水下运动和拍摄。
在快速启动步骤完成之后，请按照以下流程来操作：
1. 打开遥控器电源键，先短按，再长按，电
量指示灯亮起，同时发出“嘀嘀嘀”的响声，
开机成功。
1
2
2. 将手机或平板电脑安装在支架上。
3. 在 Youcan Dive APP 中选择设置 - 遥控器 A
控制模式。
Android 设备第一次配对遥控器时，请输入配对密码：1234。
充电接口
A
B
C
D
电量指示灯
控制设置
控制模式
按键设置
遥控器 B
APP 遥控器 A
AB
C
D
E
G H
F
D
C

13
遥控器的使用 - 简约版
遥控器充电
连接遥控器和手机
将 USB 线连接遥控器充电接口，POWER 键
指示灯不停闪烁，提示正在充电中；POWER
键指示灯亮起，提示充电满。
通过遥控器来操控 BW Space Pro 水下运动和拍摄。
在快速启动步骤完成之后，请按照以下流程来操作：
1. 连接手机或平板
1
2
2. 在 Youcan Dive APP 中选择设置 - 遥控器
B 控制模式，待遥控器发出震动后，表示连
接成功。
• 连接 Android 设备
同时按下 POWER+W 键 3-5 秒，按键灯光亮
起，同时此时工作状态指示灯 1 呈闪烁状态，
即表示开机成功。
• 连接 iOS 设备
同时按下POWER+T键3-5 秒，按键灯光亮起，
同时此时工作状态指示灯 2 呈闪烁状态，即
表示开机成功。
成功连接 Android 手机后，工作状态指示灯 1 停止闪烁，灯光亮；
成功连接 iOS 手机后，工作状态指示灯 2 停止闪烁，灯光亮起。
充电接口
指示灯 1
指示灯 2
控制设置
控制模式
按键设置
APP 遥控器 A 遥控器 B
POWER
T
W
Youcan Robot

14
安装支架：
1. 旋转螺母，将支架调整至活动状态并拉起。
2. 将支架固定在遥控器上，通过 PUSH 键锁
住支架。
3. 再次反方向旋转螺母，固定住手机支架，
将手机安装在支架上。
电量提示：当遥控器电量低于 30% 时，所有按键灯呈闪烁状态。
此款遥控器仅支持安装手机使用，不支持安装平板电脑使用。
PUSH

15
使用安全及注意事项
联系我们
约肯机器人（上海）有限公司
网站：www.youcanrobot.com
商城：store.youcanrobot.com
客服：[e-mail]
电话：[phone] Wechat 企业官网
确保线缆连接牢固
防止渗水短路
及时擦拭连接头周边的水
渍，保持干燥
请避开水草过多的
水域航行
使用后淡水冲洗
防止盐结晶
镜头为脆弱部件
勿敲打
工作温度
-10℃ ~40℃
WiFi 基站
勿投入水中
未成年人请在
家长的陪同下使用
勿大力扯拉线缆
以及连接头
连接安全扣和防丢环
以防连接头损坏

16
製品リスト
1
1
3 4 5
6 7
2
BW Space Pro 本体
コントローラー - アドバンス
コントローラー - シンプル
ケーブルリール
WiFi リピーター
充電器
グリスと密封リング
1
2
3
4
5
6
7