young time 211115 User manual

Page 1 of 4
WARNING:
CHOKING HAZARD/SHARP POINTS- Assembly
hardware contains small parts and components
with sharp points. Adult assembly required.
Attention: This unit must be attached to a wall to
prevent tipping over!!
Hardware Illustrations
Not Actual Size
Tools Required:
-4mm Hex Wrench, (Provided)
-Medium Phillips Screwdriver
Instructions for: 211115 Bookshelf
Hardware Package HCKJ
Qty. Description
(1) XAUS 4mm Hex Wrench
(8) XAUR 2" Decorative Screw
(16)XAMT Camlock Bolt
(12)XBTX #6 X 0-5/8" Trusshead Screw
(3) XAFH #8 X 3” Drywall Screw
Parts:

Page 2 of 4
Assembly Instructions:
1. Install Top-C, Bottom-A, and 2-Rails-Dto Side-Bby aligning dowels. Ensure back grooves all
align. Secure with 4-XAUR Decorative Screws with 4mm Hex Wrench provided.
2. Place 3-Backs-Fwith YIFH Plastic Moulding between them over Rails and into back grooves of the
Top and Bottom.
3. Align dowels with remaining Side-B. Ensure Backs (previously installed) are seated into Top,
Bottom, and Side grooves. Secure with 4-XAUR Decorative Screws.

Page 3 of 4
4. Secure Backs by installing 12-XBTX Truss Head Screws using a Phillips Screwdriver.
5. Stand unit upright. Determine height location desired for shelves and install 16-XAMT Camlock
Bolts into Sides. Set Shelves-Eon the camlock bolts and lock the shelves into place by turning the
metal center piece of the cam-locks under the shelves ¼ turn clockwise with a Phillips Screwdriver.

Page 4 of 4
6. Attach the unit to a wall to prevent it from tipping over. Locate wall studs and secure Bookshelf to
wall using supplied XAFH-3” Drywall Screw.
7. If you experience any difficulties when assembling this product, please contact the Jonti-Craft
Customer Relations Team at [phone] or [e-mail]. All other requests for
assistance must be directed to your Jonti-Craft Dealer.