young time 212536 User manual

Tools Required:
-4mm Hex Wrench (Provided)
-Medium Phillips Screwdriver
Hardware Included:
Not Actual Size
Instructions for:
212536 Cubbie Storage Unit
Hardware Package HCKE
Qty Description
(24) XAUR 2” Decorative Screw
(6) XCPT #8 X 0-7/8" Washerhead Screw
(1)XAUS 4mm Hex Wrench
Parts:
WARNING:
CHOKING HAZARD/SHARP POINTS- Assembly
hardware contains small parts and components
with sharp points. Adult assembly required.

Assembly Instructions:
1. Install Bottom-Aand Top-Cto LH Side-Bby aligning dowels. Ensure back dados all align. Secure with
4-XAUR Decorative Screws with 4mm Hex Wrench provided.
2. Install 4 Shelves-Dwith rounded edge down. Secure with 8-XAUR Decorative Screws with 4mm Hex
Wrench provided.
3. Align dowels with remaining RH Side-B. Install with 12-XAUR Decorative Screws with 4mm Hex
Wrench provided.

4. Install 20 Dividers-Gwith rounded edge down into grooves, insert bottom and top row by angling into
groove and snapping into place.
5. Insert Top and Bottom Backs-E by inserting into side groove on one end, bowing into other groove on
opposite end, and sliding up into full length grooves on Top and Bottom. Repeat procedure for Middle
Back-F.
6. Insert Middle Back-F by inserting into side groove on one end, bowing into other groove on opposite
end between two backs previously installed.

7. Locate predrilled holes in middle shelves and install 6-XCPT Washer head Screw.
8. Stand unit upright.