Yowza Delray Quick start guide

2
YOWZA BOCA TREADMILL
※TABLE OF CONTENTS
1. PRECAUTIONS．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P3
2. POWER REQUIRMENTS．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P4
3. BEFORE YOU BEGIN．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P5
4. SUPPLIED COMPONENTS / SUPPLIED HARDWARE．．．．．．．．．．．．．． P6~P7
5. TREADMILL OVIEW．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P8
6. ASSEMBLY INSTRUCTIONS．．．．．．．．．．． ．．．．．．．．．．．．．．P9~P18
7.POWER ON COMPUTER．．．．．．．．．．． ．．．．．．．．．．．．．．．．．．P19
8.ADJUSTABLE CUSHION．．．．．．．．．．． ．．．．．．．．．．．．．．．．．．P20
9. EXPLODED DIAGRAM ．．．．．．．．．． ．．．．．．．．．．． ．．．．． P21~P25
10. WIRING DIAGRAM．．．．．．．．．．．．．．． ．．．．．．．．．．． ．．．．．．
P26
11.CORRECT USE．．．．．．．．．．．．．．． ．．．．．．．．．．． ．．． ．．．P27
12. MAINTAINENCE．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P28~P29
13. IMPORTANT STEPS．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．
P30
14. MUSCLE CHART．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．
P31
15. STRETCHING ROUTINE．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．P32
16. TROUBLESHOOTING．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P33
17. WARRANTY．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．
P34~P35
18. PARTS LIST．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ．．
P36~P39
19. COMPUTER OPERATION．．．．．．．．．．．．．．．．．．．．．．．． ． ．． P40~P56
Yowza Technical Support
877-969-9240
Enter Serial Number: ________________________

http://www.yowzafitness.com/
3
Enter Original Sales Order # ________________________
Purchase Date: ______________

4
YOWZA DELRAY TREADMILL
PRECAUTIONS
Precautions:
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and
information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are
adequately informed of all warnings and precautions.
•Use the treadmill only as described in this manual.
•Place on a level surface, with 6 feet (2 m) of clearance behind it. Do not place the treadmill on any surface that blocks air
openings. To protect the floor or carpet from damage, place a mat under the treadmill.
•When choosing a location for the treadmill be sure that the location and position permit access to a plug.
•Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near
water.
•Do not operate the treadmill where aerosol products are used or where oxygen is being administered.
•Keep children under the age of 12 and pets away from the treadmill at all times.
•The treadmill should not be used by persons weighing more than 300LBS (130Kgs).
•Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when using the treadmill.
Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are recommended for both
men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in
sandals.
•When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should be on the same
circuit.
•Always straddle the belt and allow it to start moving before stepping onto the belt.
•Always examine your treadmill before using to ensure all parts are in working order.
•Allow the belt to fully stop before dismounting.
•Never insert any object or body parts into any opening.
•Follow the safety information in regards to plugging in your treadmill.
•Keep the power cord away from the incline wheels and do not run the power cord underneath your treadmill. Do not
operate the treadmill with a damaged or frayed power cord.
•Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by an
authorized service representative, unless authorized and/or instructed by the manufacturer. Failure to follow these
instructions will void the treadmill warranty.
•Never leave the treadmill unattended while it is running.
•Use “safety key” when operating the treadmill and make sure the “safety key” is clipped to the users clothing.
•The cell phone signal might interfere treadmill functions, keep the cell phone away from the motor hood.
Remove the “safety key” and store it in a safe place when the treadmill is not in use. Keep the “safety key” away from children.

http://www.yowzafitness.com/
5
POWER REQUIREMENTS
Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC
SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE
PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT
THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges and
noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of
treadmill damage, always use a surge protector (not included) with your treadmill.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with a
UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less and an
electrical rating 110VAC, 15 amps.
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for electric
current, should the treadmill malfunction. This treadmill is equipped with an electrical cord that has an equipment-grounding
conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug illustrated in the drawing
below.
GFCI outlets and GFCI Circuit Breakers are NOT recommended for use on this product. GFCI outlets and GFCI Circuit Breakers
may cause this equipment to function improperly.

6
YOWZA DELRAY TREADMILL
BEFORE YOU BEGIN
Open the boxes:
Open the boxes of your new equipment. Inventory all parts included in the boxes, and compare them to the Supplied Components
and Supplied Hardware lists on assembling manual for a full count of the parts included. If you are missing any parts or have any
questions contact us directly.
Gather your tools:
Before you begin, make sure that you have gathered all the necessary tools you may require to assemble the unit properly. Having
all of the necessary equipment at hand will save time and make the assembly quick and hassle-free.
Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is free from
anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a comfortable amount of free
area around the unit for unobstructed operation.
Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another person when
assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 300LBS (Approx. 130 Kgs). It is not
recommended that you use this product. Serious injury may occur if the user’s weight exceeds the limit shown here. This product is
not intended to support users whose weight exceeds this limit.
Care and maintenance:
The safety level can be maintained only if it is examined for damage and wear.
Replace any defective components immediately and stop all use of the equipment until repaired.
Always take care when mounting the equipment. Straddle the equipment by placing your feet on the straddle rails. Dismount from the
equipment only after all parts have stopped.
Always check the wear and tear components like pulley, belts, etc.…To prevent injury.
There is an emergency stop, in the form of a SAFETY KEY, to prevent injury; you can stop the treadmill immediately by actuating the
emergency stop for emergency dismount.

http://www.yowzafitness.com/
7
SUPPLIED COMPONENTS
This list identifies the major components you will use to assemble this product.
No.
Description
Qty.
105
Safety Key
1
109
Soft cushion
1
202
Handle bar cover-Left
2
203
Handle bar cover-Right
2
204
Upright tube lower cover
2
205
Handle Bar sets
2
C
Power cord
1
E
Silicone bottle
1

8
YOWZA DELRAY TREADMILL
SUPPLIED HARDWARE
This list identifies the hardware you will use to assemble the product. To help distinguish between the various types of
screws and bolts, use the scale below to measure them and compare them to the sizes listed.
No.
Description
Qty.
844
Screw M4X15
6
808
Curve washer ∮8.5X20.5X2
6
810
Button head inner hexagon Bolt
M8X18
2
806
Button head inner hexagon Bolt
M8X45x15
8
824
Button head inner hexagon Bolt
M8X52x17
2
826
Washer∮8X17X1.5
2
223
Upright rubber cap- OD14X6.5
2
A
5mm Allen Wrench
1
B
Screw driver
1
MILLIMETERS

http://www.yowzafitness.com/
9
TREADMILL OVERVIEW
LCD
Hand pulse sensor
Operation board
Safety key
Handle bar
Motor hood
Upright
Running belt
Side rail
Side rail end cap
Rear caster
Transport wheel
Power switch Electric outlet

10
YOWZA DELRAY TREADMILL
ASSEMBLY
(A) Remove your treadmill from the carton and place it on the floor in an open area.
(B) Remove the treadmill and all the components and hardware from the box.
(C) Check the quantities of all components and hardware with the component and hardware lists on pages 6-7.
(D) After verifying inventory if there are any missing parts please contact Yowza fitness at 877-969-9240.
.

http://www.yowzafitness.com/
11
STEP1
ASSEMBLY
STEP1-A). Rotate the Uprights up to vertical position.
STEP1-B). Using the Washer ∮8X17X1.5 (826) and M8x58mm Bolt (824)
to secure the upright to frame by Allen wrench (A).
STEP1-C). Using the Curve Washer∮8.5X20.5X2 (808) and Button head
inner hexagon Bolt M8X18(810) to secure the upright to frame by Allen
wrench (A).
STEP1-D). Fasten all bolts again with Allen wrench (A).
808
X2
810
X2
826
X2
824
X2

12
YOWZA DELRAY TREADMILL
STEP2
ASSEMBLY
STEP2). Attach the Upright tube lower cover (204) to the upright lower section,
using the Screw M4X15 (844) to fasten. Then insert the Upright rubber cap-
OD14X6.5 (223)
844
X2
204
X2
223
X2

http://www.yowzafitness.com/
13
STEP3
ASSEMBLY
STEP3).Hold up the console Semi-finished product assembly and put it onto
the upright bracket. Please make sure that the holes must be overlapping.
Using the Button head inner hexagon Bolt M8X42x10(806) to fasten slightly
806
X2

14
YOWZA DELRAY TREADMILL
STEP4
ASSEMBLY
STEP4). Attach the Handlebar (205) into the console support tube, rotate the
handlebar until the screw holes are overlapping completely
205
X2

http://www.yowzafitness.com/
15
STEP5
ASSEMBLY
STEP5).Using the Button head inner hexagon Bolt M8X42x10 (806) and
Curve washer ∮8.5X20.5X2 (808) to fix them together by 5mm Allen
Wrench(A).
All Button head inner hexagon Bolt securing again
806
X6
808
X4

16
YOWZA DELRAY TREADMILL
STEP6
ASSEMBLY
STEP6- A
STEP6- B
STEP6- C
STEP6- C
STEP6- D
STEP6- E
STEP6) Connecting the cables plug between console and upright. Users need to be careful to distinguish the direction then
insert together

http://www.yowzafitness.com/
17
STEP7
ASSEMBLY
STEP7-A). Attach the Handle bar cover-Left(202) and Handle bar cover-
Right(203) into the upright tube groove
202
X2
203
X2

18
YOWZA DELRAY TREADMILL
STEP8
ASSEMBLY
STEP8. Fixed Handle bar cover together using Screw
M4X15 (844)
844
X4

http://www.yowzafitness.com/
19
STEP9
ASSEMBLY
Assembly completely!

20
YOWZA DELRAY TREADMILL
POWER ON COMPUTER
1.Connceting the power cord
2.Press down the power switch to
turn on
3.Inserting the safety key into the
slot of console
4. Press the safety key inside
slightly ,and turn it to the up to light
up the LCD