Yowza BISCAYNE User manual

Biscayne Treadmill
TABLE OF CONTENTS
1. PRECAUTIONS．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P2
2. POWER REQUIRMENTS．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P3
3. BEFORE YOU BEGIN．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P4
4. SUPPLIED COMPONENTS / SUPPLIED HARDWARE．．．．．．．．．．．．．． P5~P6
5. PARTS LIST．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P7~P12
6. ASSEMBLY INSTRUCTIONS．．．．．．．．．．．．．．．．．．．．．．．． P13~P16
7. EXPLODED DIAGRAM．．．．．．．．．．．．．．．．．．．．．．．．．．． P17~P23
8. STABILIZER ADJUSTMENT．．．．．．．．．．．．．．．．．．．．．．．．．． ．P24
9. MAINTAINENCE．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P25~P26
10. FOLDING / UNFOLDING INSTRUCTIONS．．．．．．．．．．．．．．．．．．．．．P27
11. IMPORTANT STEPS．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P28
12. MUSCLE CHART．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P29
13. STRETCHING ROUTINE．．．．．．．．．．．．．．．．．．．．．．．．．．．． P30
14. TROUBLESHOOTING．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P31
15. WARRANTY．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P32~P33
16. COMPUTER OPERATION．．．．．．．．．．．．．．．．．．．．．．．．． P34~P42
Yowza Technical Support: 877-969-9240
Serial Number: ________________________
Original Sales Order # ________________________
Purchase Date: ____________

2
YOWZA BISCAYNE TREADMILL
PRECAUTIONS
Precautions:
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and
information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are
adequately informed of all warnings and precautions.
Use the treadmill only as described in this manual.
Place on a level surface, with 6 feet (2 m) of clearance behind it. Do not place the treadmill on any surface that blocks air
openings. To protect the floor or carpet from damage, place a mat under the treadmill.
When choosing a location for the treadmill be sure that the location and position permit access to a plug.
Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near
water.
Do not operate the treadmill where aerosol products are used or where oxygen is being administered.
Keep children under the age of 12 and pets away from the treadmill at all times.
The treadmill should not be used by persons weighing more than 350LBS.
Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when using the treadmill.
Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are recommended for both
men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in
sandals.
When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should be on the same
circuit.
Always straddle the belt and allow it to start moving before stepping onto the belt.
Always examine your treadmill before using to ensure all parts are in working order.
Allow the belt to fully stop before dismounting.
Never insert any object or body parts into any opening.
Follow the safety information in regards to plugging in your treadmill.
Keep the power cord away from the incline wheels and do not run the power cord underneath your treadmill. Do not
operate the treadmill with a damaged or frayed power cord.
Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by an
authorized service representative, unless authorized and/or instructed by the manufacturer. Failure to follow these
instructions will void the treadmill warranty.
Never leave the treadmill unattended while it is running.
Use “safety key” when operating the treadmill and make sure the “safety key” is clipped to the users clothing.
The cell phone signal might interfere treadmill functions, keep the cell phone away from the motor hood.
Remove the “safety key” and store it in a safe place when the treadmill is not in use. Keep the “safety key” away from
children.

http://www.yowzafitness.com/
3
POWER REQUIREMENTS
Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC
SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE
PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT
THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges and
noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of
treadmill damage, always use a surge protector (not included) with your treadmill.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with a
UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less and an
electrical rating 110VAC, 15 amps.
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for electric
current, should the treadmill malfunction. This treadmill is equipped with an electrical cord that has an equipment-grounding
conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug illustrated in the drawing
below.
GFCI outlets and GFCI Circuit Breakers are NOT recommended for use on this product. GFCI outlets and GFCI Circuit Breakers
may cause this equipment to function improperly.

4
YOWZA BISCAYNE TREADMILL
BEFORE YOU BEGIN
Open the boxes:
Open the boxes of your new equipment. Inventory all parts included in the boxes, and compare them to the Supplied Components
and Supplied Hardware lists on pages 5-6 for a full count of the parts included. If you are missing any parts or have any questions
contact us directly.
Gather your tools:
Before you begin, make sure that you have gathered all the necessary tools you may require to assemble the unit properly. Having
all of the necessary equipment at hand will save time and make the assembly quick and hassle-free.
Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is free from
anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a comfortable amount of free
area around the unit for unobstructed operation.
Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another person when
assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 350LBS. It is not recommended that you use
this product. Serious injury may occur if the user’s weight exceeds the limit shown here. This product is not intended to support
users whose weight exceeds this limit.
Care and maintenance:
The safety level can be maintained only if it is examined for damage and wear.
Replace any defective components immediately and stop all use of the equipment until repaired.
Always take care when mounting the equipment. Straddle the equipment by placing your feet on the straddle rails. Dismount from
the equipment only after all parts have stopped.
Always check the wear and tear components like pulley, belts, etc.…To prevent injury.
There is an emergency stop, in the form of a SAFETY KEY, to prevent injury; you can stop the treadmill immediately by actuating
the emergency stop for emergency dismount.

http://www.yowzafitness.com/
5
SUPPLIED COMPONENTS
This list identifies the major components you will use to assemble this product.
No.
Description
Qty.
F
E
208 220106
A1
A2 A3
111
A1
Main Frame Assembly
1
A2
Left Handlebar Assembly
1
A3
Right Handlebar Assembly
1
106
Water Bottle Holder
2
111
Safety Key
1
208
Handlebar Cap
2
220
Side Cover
2
E
Power Cord
1
F
Lubricant
1

6
YOWZA BISCAYNE TREADMILL
SUPPLIED HARDWARE
This list identifies the hardware you will use to assemble the product. To help distinguish between the various types of
screws and bolts, use the scale below to measure them and compare them to the sizes listed.
No.
Description
Qty.
B
A
901 902
903 904
901
6x20xT2.0mm Washer
2
902
6x10x1mm Washer
2
903
M6x12mm Allen Head CAP Bolt
2
904
M10x62mm Bolt
4
A
6mm Allen Key
1
B
5mm Allen Key
1
MILLIMETERS

http://www.yowzafitness.com/
7
PARTS LIST
Item No.
Description
Qty.
Part No.
BISCAYNE -100
101
Overlay
1
BISCAYNE-101
102
Computer Insert
1
BISCAYNE-102
103
Adjustable Vane
1
BISCAYNE-103
104
Console Housing –Upper
1
BISCAYNE-104
105
Safety Key Seat Cover
1
BISCAYNE-105
106
Water Bottle Holder
2
BISCAYNE-106
107
Hand Pulse Sensor Cover –Left
1
BISCAYNE-107
108
Hand Pulse Sensor Cover –Right
1
BISCAYNE-108
109
Hand Pulse Sensor Rear Cover
1
BISCAYNE-109
110
Safety Key Seat
1
BISCAYNE-110
111
Safety Key
1
BISCAYNE-111
112
Console Support Tube
1
BISCAYNE-112
113
Fan Frame –Upper
1
BISCAYNE-113
114
Fan Frame –Bottom
1
BISCAYNE-114
115
Console Housing –Bottom
1
BISCAYNE-115
116
Speaker Cover –Left
1
BISCAYNE-116
117
Speaker Cover –Right
1
BISCAYNE-117
118
Dock Cover –Top
1
BISCAYNE-118
119
Dock Cover –Bottom
1
BISCAYNE-119
BISCAYNE -200
201
Upright Cover-LL
1
BISCAYNE-201
202
Upright Cover-LR
1
BISCAYNE-202
203
Upright Cover-RL
1
BISCAYNE-203
204
Upright Cover-RR
1
BISCAYNE-204
205
Wire Holder
2
BISCAYNE-205
206
Upright Support Tube
1
BISCAYNE-206
207
Console Support Pivot Holder –Upper
2
BISCAYNE-207
208
Handlebar Cap
2
BISCAYNE-208
209
Handlebar Pivot Holder –Left
1
BISCAYNE-209
210
Console Support Pivot Holder –Bottom
2
BISCAYNE-210
211
Handlebar Pivot Shaft Bracket –Left
1
BISCAYNE-211
212
Handlebar Pivot Shaft Bracket –Right
1
BISCAYNE-212
213
Handlebar Pivot Holder –Right
1
BISCAYNE-213
214
Handlebar Foam Grip
2
BISCAYNE-214
215
Handlebar
2
BISCAYNE-215
216
Handlebar End Cap
2
BISCAYNE-216
217
Upright Linkage Rod
2
BISCAYNE-217
218
Upright –Left
1
BISCAYNE-218
219
Upright –Right
2
BISCAYNE-219
220
Side Cover
2
BISCAYNE-220
221
Upright Lower Cover –LL
1
BISCAYNE-221
222
Upright Pivot Bracket –Left
1
BISCAYNE-222
223
Upright Lower Cover –LR
1
BISCAYNE-223
224
Upright Lower Cover –RL
1
BISCAYNE-224
225
Upright Pivot Bracket –Right
1
BISCAYNE-225
226
Upright Lower Cover –RR
1
BISCAYNE-226

8
YOWZA BISCAYNE TREADMILL
PARTS LIST
Item No.
Description
Qty.
Part No.
BISCAYNE -300
301
Linkage
2
BISCAYNE-301
302
Needle Bearing
4
BISCAYNE-302
303
Elevation Support Tube
1
BISCAYNE-303
304
Bearing 6000
6
BISCAYNE-304
305
Caster
2
BISCAYNE-305
306
Linkage Frame
1
BISCAYNE-306
307
Shock Holder –Upper
1
BISCAYNE-307
308
Shock Holder –Bottom
1
BISCAYNE-308
309
Shock
2
BISCAYNE-309
310
Shock Bracket
1
BISCAYNE-310
311
Linkage Holder
1
BISCAYNE-311
312
Guide Roller
2
BISCAYNE-312
313
Lock Assembly Linkage
1
BISCAYNE-313
314
Fold Linkage Tube
1
BISCAYNE-314
315
Fold Handle #1
1
BISCAYNE-315
BISCAYNE -400
401
Skidproof cushion
48
BISCAYNE-401
402
Side Rail –Left
1
BISCAYNE-402
403
Side Rail –Right
1
BISCAYNE-403
404
Side Rail End Cover
2
BISCAYNE-404
405
Running Belt
1
BISCAYNE-405
406
Running Deck
1
BISCAYNE-406
407
Cushion Pad
BISCAYNE-407
BISCAYNE -500
501
Vent Cover
10
BISCAYNE-501
502
Motor Front Hood
1
BISCAYNE-502
503
Motor Hood
1
BISCAYNE-503
504
Motor Top Cover
1
BISCAYNE-504
505
Motor Side Hood –Left
1
BISCAYNE-505
506
Motor Side Hood –Right
1
BISCAYNE-506
507
Elevation Gear Sleeve
1
BISCAYNE-507
508
Elevation Support Tube
1
BISCAYNE-508
509
Plastic Bushing
2
BISCAYNE-509
510
Wheel
2
BISCAYNE-510
511
Elevation Support Tube Set –Left
1
BISCAYNE-511
512
Elevation Support Tube Set –Right
1
BISCAYNE-512
513
Motor Holder
1
BISCAYNE-513
514
Driving Belt
1
BISCAYNE-514
515
Power Plate
1
BISCAYNE-515
516
Motor Cover –Bottom
1
BISCAYNE-516
517
Lock Assembly Linkage Cap
2
BISCAYNE-517
BISCAYNE -600
601
Control Board
1
BISCAYNE-601
602
Elevation Board
1
BISCAYNE-602
603
Transformer
1
BISCAYNE-603
604
Driving Motor
1
BISCAYNE-604
605
Power Breaker
1
BISCAYNE-605

http://www.yowzafitness.com/
9
PARTS LIST
Item No.
Description
Qty.
Part No.
606
Power Switch
1
BISCAYNE-606
607
Elevation Motor
1
BISCAYNE-607
608
Computer PC Board
1
BISCAYNE-608
609
Button PC Board
1
BISCAYNE-609
610
3x8mm Screw
1
BISCAYNE-610
611
Elevation Control Board Fix Bolt
6
BISCAYNE-611
612
Power Insert
1
BISCAYNE-612
613
8 Pin Power Wire –Upper
1
BISCAYNE-613
614
8 Pin Power Wire –Middle
1
BISCAYNE-614
615
8 Pin Power Wire –Lower
1
BISCAYNE-615
616
3P Power Connect Wire
1
BISCAYNE-616
617
Power Connect Wire
1
BISCAYNE-617
618
3C Power Wire
1
BISCAYNE-618
620
Control Board Connect Wire
1
BISCAYNE-620
622
Hand Pulse Sensor Wire
2
BISCAYNE-622
623
Receiver
1
BISCAYNE-623
624
3/8” Cable Tie
2
BISCAYNE-624
625
5/16” Cable Tie
2
BISCAYNE-625
626
Fan
1
BISCAYNE-626
627
Receiver Wire
1
BISCAYNE-627
628
Safety Key Wire –Upper
1
BISCAYNE-628
629
Safety Key Wire –Middle
1
BISCAYNE-629
630
Safety Key Wire –Lower
1
BISCAYNE-630
631
Ground Wire
1
BISCAYNE-631
632
Speaker
2
BISCAYNE-632
633
I-Pod Dock
1
BISCAYNE-633
634
Amplifier PC Board
1
BISCAYNE-634
635
Volume Button Board
1
BISCAYNE-635
636
2pin Amplifier Power Connection Wire
1
BISCAYNE-636
637
3pin Amplifier Volume Wire
1
BISCAYNE-637
638
6pin I-pod Dock Connection Wire
1
BISCAYNE-638
639
Speaker Wire
1
BISCAYNE-639
BISCAYNE -700
701
Front Roller Shaft
1
BISCAYNE-701
702
Front Roller
1
BISCAYNE-702
703
Pulley
1
BISCAYNE-703
704
Bearing Bushing
4
BISCAYNE-704
705
Bearing 6202
4
BISCAYNE-705
706
Upright Cushion
2
BISCAYNE-706
707
Running Deck Support Tube
1
BISCAYNE-707
708
Rear Frame –Rear
1
BISCAYNE-708
709
Rear Stabilizer
2
BISCAYNE-709
710
Deck Frame
1
BISCAYNE-710
712
Lock Bracket
1
BISCAYNE-712
713
Fold Handle #2
1
BISCAYNE-713
714
Rear Roller
1
BISCAYNE-714
715
Rear Roller Shaft
1
BISCAYNE-715
716
Deck Frame Cover –Front
1
BISCAYNE-716

10
YOWZA BISCAYNE TREADMILL
PARTS LIST
Item No.
Description
Qty.
Part No.
717
Handle Tube
1
BISCAYNE-717
718
Handle Tube Grip Foam
2
BISCAYNE-718
719
Deck Frame Cover –Rear
2
BISCAYNE-719
720
Handle Cover –Left
1
BISCAYNE-720
721
Handle Cover –Right
1
BISCAYNE-721
722
Level Adjuster
2
BISCAYNE-722
BISCAYNE -800
801
3x12mm Screw
12
BISCAYNE-801
802
M3x8mm Screw
2
BISCAYNE-802
803
M5 Nut
4
BISCAYNE-803
804
M5x10mm Bolt
6
BISCAYNE-804
805
4x12mm Screw
4
BISCAYNE-805
806
4x12mm Screw –Flat Point
8
BISCAYNE-806
808
M6x12mm Countersink Head Bolt
2
BISCAYNE-808
809
M6x12mm Screw
6
BISCAYNE-809
810
6x20xT2.0mm Washer
2
BISCAYNE-810
811
6x10x1mm Spring Washer
2
BISCAYNE-811
812
M5x10mm Flat Head Bolt
8
BISCAYNE-812
813
Handlebar Pivot Shaft Holder
2
BISCAYNE-813
814
Pivot 10x30mm
2
BISCAYNE-814
815
9x8.5x4mm Washer
2
BISCAYNE-815
816
6x10.2 –M5x4.5mm Screw
2
BISCAYNE-816
817
Bushing 15x19x13.5mm
2
BISCAYNE-817
818
Handlebar Pivot Shaft
2
BISCAYNE-818
819
Bushing 15x21x6mm
2
BISCAYNE-819
820
6.5x13xT1.5mm Washer
6
BISCAYNE-820
821
M8x265mm Bolt
2
BISCAYNE-821
822
Handlebar Bracket
2
BISCAYNE-822
823
6x11xT3.0 Washer
2
BISCAYNE-823
824
M6x30mm Bolt
2
BISCAYNE-824
825
M12x95mm Bolt
2
BISCAYNE-825
826
M10 Nut
2
BISCAYNE-826
827
Upright Linkage Assembly Holder
2
BISCAYNE-827
828
Bushing 12x16x25.4mm
2
BISCAYNE-828
829
Bushing 12x15x15mm
2
BISCAYNE-829
830
Adjustment Nut
2
BISCAYNE-830
831
25mm C Clip
2
BISCAYNE-831
832
M10x62mm Bolt
2
BISCAYNE-832
833
Bushing 25x32-35x16mm
4
BISCAYNE-833
834
10x16xT1.5mm Washer
8
BISCAYNE-834
835
M10x62mm Bolt
4
BISCAYNE-835
836
M10 C Clip
4
BISCAYNE-836
837
M6x23mm Bolt
2
BISCAYNE-837
838
Pivot 10x77.5mm
1
BISCAYNE-838
839
8mm Blind Nut
4
BISCAYNE-839
840
M8x15mm Screw
8
BISCAYNE-840
841
4x15mm Screw –Flat Point
4
BISCAYNE-841
842
Pivot 12x118mm
2
BISCAYNE-842

http://www.yowzafitness.com/
11
PARTS LIST
Item No.
Description
Qty.
Part No.
843
M6 Nut
4
BISCAYNE-843
844
6x16x2mm Washer
5
BISCAYNE-844
845
Spring
2
BISCAYNE-845
846
6x190mm Bolt
1
BISCAYNE-846
847
Guide Roller Holder
2
BISCAYNE-847
848
Pivot 6x29.6mm
2
BISCAYNE-848
849
Bushing 6.05x14x6mm
4
BISCAYNE-849
850
M6 C Clip
4
BISCAYNE-850
851
6x150mm Bolt
1
BISCAYNE-851
852
M6 Nylon Nut
3
BISCAYNE-852
853
6x13x1mm Washer
2
BISCAYNE-853
854
M6 x 25mm Bolt
2
BISCAYNE-854
855
Spring 8x65mm
1
BISCAYNE-855
856
Sleeve 6x12x38mm
1
BISCAYNE-856
857
M6x25mm Bolt
1
BISCAYNE-857
858
Lock Assembly Bracket
1
BISCAYNE-858
859
M6x35mm Bolt
4
BISCAYNE-859
860
Sleeve 8.1x12x17mm
1
BISCAYNE-860
861
8 x 22 x 2mm Washer
5
BISCAYNE-861
862
M8 x 30mm Bolt
1
BISCAYNE-862
863
M10x50mm Bolt
3
BISCAYNE-863
864
M8x30mm Bolt
1
BISCAYNE-864
865
M10 Nylon Nut
8
BISCAYNE-865
866
M8 Nylon Nut
2
BISCAYNE-866
867
M8x75mm Bolt
10
BISCAYNE-867
868
4x15mm Screw
38
BISCAYNE-868
869
M8x25mm Bolt
10
BISCAYNE-869
870
8mm Spring Washer
12
BISCAYNE-870
871
M8 Nut
12
BISCAYNE-871
872
M10x40mm Bolt
1
BISCAYNE-872
873
M5x77mm Screw
2
BISCAYNE-873
874
15x45 –M14x15mm Bolt
2
BISCAYNE-874
875
Wheel Bushing
4
BISCAYNE-875
876
Spring 6x4x30mm
2
BISCAYNE-876
877
M8x100mm Bolt
1
BISCAYNE-877
878
M10x142mm Bolt
1
BISCAYNE-878
879
M8x20mm Bolt
2
BISCAYNE-879
880
8x16x3mm Washer
2
BISCAYNE-880
881
5x12x1mm Washer
2
BISCAYNE-881
882
M5 Nylon Nut
2
BISCAYNE-882
883
Iron Plate Nut
4
BISCAYNE-883
884
4.5x15mm Screw
4
BISCAYNE-884
885
Motor Hood Holder
2
BISCAYNE-885
886
Bushing 10x16.2x12.5mm
4
BISCAYNE-886
887
Bushing 6.2x12x6mm
2
BISCAYNE-887
888
Spring 2x390mm
1
BISCAYNE-888
889
M10x105mm Bolt
1
BISCAYNE-889
890
M6x10mm Screw
2
BISCAYNE-890

12
YOWZA BISCAYNE TREADMILL
PARTS LIST
Item No.
Description
Qty.
Part No.
891
15x22x1mm Washer
7
BISCAYNE-891
892
M6x70mm Allen Head CAP Bolt
3
BISCAYNE-892
893
M10x60mm Bolt
2
BISCAYNE-893
894
Pivot 10x33.2mm
2
BISCAYNE-894
895
M8x20mm Allen Head CAP Bolt
4
BISCAYNE-895
896
Taper Fixing Insert
2
BISCAYNE-896
897
5x10mm Screw –Flat Point
4
BISCAYNE-897
900
M5x15mm Screw
2
BISCAYNE-900
BISCAYNE -800
901
6x20xT2.0mm Washer
2
BISCAYNE-901
902
6x10x1mm Washer
2
BISCAYNE-902
903
M6x12mm Allen Head CAP Bolt
2
BISCAYNE-903
904
M10x62mm Bolt
4
BISCAYNE-904

http://www.yowzafitness.com/
13
ASSEMBLY
1
2
3
4
6
8
5
7
CUT
CUT
CUT
CUT
(A) Remove your treadmill from the carton and place it on the floor in an open area.
(B) Remove the treadmill and all the components and hardware from the box.
(C) Check the quantities of all components and hardware with the component and hardware lists on pages 5-6.
(D) After verifying inventory if there are any missing parts please contact Yowza fitness at 877-969-9240.

14
YOWZA BISCAYNE TREADMILL
STEP1
ASSEMBLY
A3
A2
901
903
902
901
903
902
STEP1-A). Attach the Handlebar (A2, A3) to the upright, and secure using
Allen Head CAP Bolt (903) with Washer (902), Washer (901).
903
X2
902
X2
901
X2

http://www.yowzafitness.com/
15
STEP2
ASSEMBLY
220
904
220
904
STEP3-A). Rotate the upright, and secure using the Bolt (904).
SETP3-B). Attach the Side Cover (220).
904
X4

16
YOWZA BISCAYNE TREADMILL
STEP3
ASSEMBLY
208
213
208209
106
106
104
STEP3). Attach the Handlebar Cap (208) and Water Bottle Holder (106).
Your treadmill is now fully assembled.

http://www.yowzafitness.com/
17
EXPLODED DIAGRAM
806
610
805
610
805
806
806
805
807
801
802
111
108
110
801
109
107
112
106
104
106
101 116
899
807
632
632 899
117
103
900
900 105
801
119
118
804
113
626
804
803
114
633
102
806
806
115
805
608
609
896
896

18
YOWZA BISCAYNE TREADMILL
EXPLODED DIAGRAM
812819
205
207
809
818
814
818
206
817
904
833 222 833 223 224833 833
225 904
814
813
819
218
212 812
809
219
217
815210 213901902903 208
811
215
216
820
207
808
801
203 204
202
201
831
816
806
810
813
809
209
815
811
211
901
210
902
903
215
820
214
821
220
217
822
816
825826 828
221
806 827 829
812
812
810
826 827 825 226 806
828 220
829
808
821
817
806
806
3mm
830
831
830
806
822
823
824
824216823
214
208 205
SA- PB- T 7 5 - 0 1
868

http://www.yowzafitness.com/
19
EXPLODED DIAGRAM
836 834 838 834 304 836
841
837
304 894
304
835
836
894 304 305 835
834
302
834 835
835 834
302
834
836
301
301
832
310 840 841 311 840
308 839
307
309
839
850
849
847
848 312 843
849 844 851 844 842
845 843
312
843
848
847
845
844
846
844
842
856
843 844
852
853
313855853
859
854
858
857
861C
860
862
865
863
866
315
864
314
865
834
306 305
834
303
837
852C

20
YOWZA BISCAYNE TREADMILL
EXPLODED DIAGRAM
868
402
404
404 403
868
867 401
401
401
401
869
407
871
870
406
870
870
870
405
401
867 401
401
401
401
401