Yowza Osprey User manual

※TABLE OF CONTENTS
1. PRECAUTIONS．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P2
2. POWER REQUIRMENTS．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P3
3. BEFORE YOU BEGIN．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P4
4. SUPPLIED COMPONENTS / SUPPLIED HARDWARE．．．．．．．．．．．．．． P5~P6
5. PARTS LIST．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P7~P10
6. ASSEMBLY INSTRUCTIONS / ADJUSTABLE CUSHION．．．．．．．．．．． P11~P15
7. EXPLODED DIAGRAM．．．．．．．．．．．．．．．．．．．．．．．．．．． P16~P21
8. FOLDING INSTRUCTIONS / UNFOLDING INSTRUCTIONS．．．．．．．．．．． P22~P23
9. TRANSPORT INSTRUCTIONS/ CORRECT USE ．．．．．．．．．．．．．．．． P24~P25
10. MAINTAINENCE．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P26~P27
11. IMPORTANT STEPS．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．P28
12. MUSCLE CHART．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P29
13. STRETCHING ROUTINE．．．．．．．．．．．．．．．．．．．．．．．．．．．． P30
14. TROUBLESHOOTING．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P31
15. WARRANTY．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． P32~P33
16. COMPUTER OPERATION．．．．．．．．．．．．．．．．．．．．．．．．． P34~P42
Yowza Technical Support
877-969-9240
Enter Serial Number: ________________________
Enter Original Sales Order # ________________________
Purchase Date: ______________

2
YOWZA OSPREY TREADMILL
PRECAUTIONS
Precautions:
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and
information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are
adequately informed of all warnings and precautions.
Use the treadmill only as described in this manual.
Place on a level surface, with 6 feet (2 m) of clearance behind it. Do not place the treadmill on any surface that blocks air
openings. To protect the floor or carpet from damage, place a mat under the treadmill.
When choosing a location for the treadmill be sure that the location and position permit access to a plug.
Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near
water.
Do not operate the treadmill where aerosol products are used or where oxygen is being administered.
Keep children under the age of 12 and pets away from the treadmill at all times.
The treadmill should not be used by persons weighing more than 300LBS (136Kgs).
Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when using the treadmill.
Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are recommended for both
men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in
sandals.
When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should be on the same
circuit.
Always straddle the belt and allow it to start moving before stepping onto the belt.
Always examine your treadmill before using to ensure all parts are in working order.
Allow the belt to fully stop before dismounting.
Never insert any object or body parts into any opening.
Follow the safety information in regards to plugging in your treadmill.
Keep the power cord away from the incline wheels and do not run the power cord underneath your treadmill. Do not
operate the treadmill with a damaged or frayed power cord.
Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by an
authorized service representative, unless authorized and/or instructed by the manufacturer. Failure to follow these
instructions will void the treadmill warranty.
Never leave the treadmill unattended while it is running.
Use “safety key” when operating the treadmill and make sure the “safety key” is clipped to the users clothing.
The cell phone signal might interfere treadmill functions, keep the cell phone away from the motor hood.
Remove the “safety key” and store it in a safe place when the treadmill is not in use. Keep the “safety key” away from children.

http://www.yowzafitness.com/
3
POWER REQUIREMENTS
Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC
SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE
PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT
THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges and
noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of
treadmill damage, always use a surge protector (not included) with your treadmill.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with a
UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less and an
electrical rating 110VAC, 15 amps.
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for electric
current, should the treadmill malfunction. This treadmill is equipped with an electrical cord that has an equipment-grounding
conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug illustrated in the drawing
below.
GFCI outlets and GFCI Circuit Breakers are NOT recommended for use on this product. GFCI outlets and GFCI Circuit Breakers
may cause this equipment to function improperly.

4
YOWZA OSPREY TREADMILL
BEFORE YOU BEGIN
Open the boxes:
Open the boxes of your new equipment. Inventory all parts included in the boxes, and compare them to the Supplied Components
and Supplied Hardware lists on assembling manual for a full count of the parts included. If you are missing any parts or have any
questions contact us directly.
Gather your tools:
Before you begin, make sure that you have gathered all the necessary tools you may require to assemble the unit properly. Having
all of the necessary equipment at hand will save time and make the assembly quick and hassle-free.
Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is free from
anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a comfortable amount of free
area around the unit for unobstructed operation.
Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another person when
assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 300LBS (Approx. 136 Kgs). It is not
recommended that you use this product. Serious injury may occur if the user’s weight exceeds the limit shown here. This product is
not intended to support users whose weight exceeds this limit.
Care and maintenance:
The safety level can be maintained only if it is examined for damage and wear.
Replace any defective components immediately and stop all use of the equipment until repaired.
Always take care when mounting the equipment. Straddle the equipment by placing your feet on the straddle rails. Dismount from the
equipment only after all parts have stopped.
Always check the wear and tear components like pulley, belts, etc.…To prevent injury.
There is an emergency stop, in the form of a SAFETY KEY, to prevent injury; you can stop the treadmill immediately by actuating the
emergency stop for emergency dismount.

http://www.yowzafitness.com/
5
SUPPLIED COMPONENTS
This list identifies the major components you will use to assemble this product.
No.
Description
Qty.
267
Handlebar
2
258
Upright fix bolt cover-left
1
221
Upright fix bolt cover-right
1
265
Left Handlebar cover –outside
1
264
Left Handlebar cover –inside
1
263
Right Handlebar cover –inside
1
262
Right Handlebar cover –
outside
1
E
Power Cord
1
130
Safety Key
1
F
Silicone bottle
1

6
YOWZA OSPREY TREADMILL
SUPPLIED HARDWARE
This list identifies the hardware you will use to assemble the product. To help distinguish between the various types of
screws and bolts, use the scale below to measure them and compare them to the sizes listed.
No.
Description
Qty.
837
M10x58 Bolt
4
126
M8X12 Allen head bolt
6
843
M3X14 Screw
8
A
5mm Allen Key
1
B
6mm Allen Key
1
C
Screwdriver
1
D
5mm Allen Wrench
1
MILLIMETERS

http://www.yowzafitness.com/
7
PARTS LIST
Item No.
Description
Qty.
Part No.
109
Safety key base
1
OSPREY-109
110
Safety key base fix plate
1
OSPREY-110
126
M8X12 allen head bolt
10
OSPREY-126
130
Safety key
1
OSPREY-130
131
Console housing -Lower
1
OSPREY-131
132
Console housing -upper
1
OSPREY-132
135
Console housing Decorate cover -right
1
OSPREY-135
138
Console housing Decorate cover -left
1
OSPREY-138
145
Computer
1
OSPREY-145
147
Overlay
1
OSPREY-147
218
Right upright lower cover –Front
1
OSPREY-218
221
Upright fix bolt cover-right
1
OSPREY-221
231
ID25XOD31XOD38X13 Sleeve
4
OSPREY-231
235
Handlebar end cap
2
OSPREY-235
239
Upright -Right
1
OSPREY-239
242
Right upright lower cover –Rear
1
OSPREY-242
243
Left upright lower cover –Front
1
OSPREY-243
244
Right side motor hood decorate cover
1
OSPREY-244
248
ID45XL328XT3.0 foam grip
2
OSPREY-248
251
Hand pulse sensor cover -Lower
1
OSPREY-251
256
Console support frame
1
OSPREY-256
257
Hand pulse sensor cover -upper
1
OSPREY-257
258
Upright fix bolt cover-left
1
OSPREY-258
259
Left upright lower cover –Rear
1
OSPREY-259
261
Left side motor hood decorate cover
1
OSPREY-261
262
Right Handlebar cover –outside
1
OSPREY-262
263
Right Handlebar cover –inside
1
OSPREY-263
264
Left Handlebar cover –inside
1
OSPREY-264
265
Left Handlebar cover –outside
1
OSPREY-265
267
Handlebar
2
OSPREY-267
273
Upright –Left
1
OSPREY-273
310
Tension bearing fix plate base
1
OSPREY-310
313
Cushion
2
OSPREY-313
317
2.0x17x99.5mm spring
1
OSPREY-317
320
Rear transport wheel holder
1
OSPREY-320
322
ID8X50X18X20.5 Rear transport wheel
2
OSPREY-322
324
OD3.4 X L34 plastic bushing
2
OSPREY-324
325
Soft drop shock
1
OSPREY-325
328
Rear transport wheel frame
1
OSPREY-328
329
Rear transport wheel cover
1
OSPREY-329
330
T42-330
2
OSPREY-330
331
Power switch board plate
1
OSPREY-331
332
Power switch
1
OSPREY-332
333
Power cord plug
1
OSPREY-333
334
Spring
1
OSPREY-334
335
Motor control board
1
OSPREY-335

8
YOWZA OSPREY TREADMILL
PARTS LIST
Item No.
Description
Qty.
Part No.
336
Connecting plate
1
OSPREY-336
337
Transformer
1
OSPREY-337
338
M8 Nut
1
OSPREY-338
339
Rear elevation support tube cusion ring
2
OSPREY-339
348
Front motor hood decorate cover –Right
1
OSPREY-348
353
Motor hood
1
OSPREY-353
354
Soft drop shock holder nylon cover
1
OSPREY-354
355
Soft drop locker
1
OSPREY-355
357
Soft drop shock holder
1
OSPREY-357
358
Lock pin
2
OSPREY-358
359
Rear elevation support tube fix holder
2
OSPREY-359
360
Rear elevation support tube fix plate
2
OSPREY-360
361
Rear elevation support tube -Right
1
OSPREY-361
362
Rear elevation support tube -Left
1
OSPREY-362
365
Electronic protector
1
OSPREY-365
366
Tension bearing fix plate
1
OSPREY-366
367
Driving belt
1
OSPREY-367
368
DC Motor
1
OSPREY-368
369
Incline Motor
1
OSPREY-369
371
Front motor hood decorate cover -Left
1
OSPREY-371
372
Motor cover protect cushion - front
1
OSPREY-372
373
Φ8X17X1.5 Washer
11
OSPREY-373
378
Motor Cover -Lower
1
OSPREY-378
406
Left rear end cap –lower
1
OSPREY-406
409
Right rear end cap decorate cover
1
OSPREY-409
424
M10 Spring
1
OSPREY-424
432
OD23X39 Axle
1
OSPREY-432
448
Non slip cushion
28
OSPREY-448
450
Right side rail
1
OSPREY-450
452
Left side rail
1
OSPREY-452
455
Left rear end cap decorate cover
1
OSPREY-455
456
Right rear end cap –lower
1
OSPREY-456
458
Right rear end cap –upper
1
OSPREY-458
459
Left rear end cap -upper
1
OSPREY-459
469
Running belt
1
OSPREY-469
470
M8X16-30X26 protector
8
OSPREY-470
471
Running deck
1
OSPREY-471
507
14.96X604.8 Rear roller shaft
1
OSPREY-507
510
Folding tie rod spacer
1
OSPREY-510
512
Φ6X806.19-M6X50 pole
1
OSPREY-512
514
Folding tie rod fix holder
1
OSPREY-514
515
Folding tie rod handle
1
OSPREY-515
517
Rear adjustment cushion
2
OSPREY-517
518
Main frame bottom cover -lower
1
OSPREY-518
520
Main frame bottom cover -upper
1
OSPREY-520

http://www.yowzafitness.com/
9
PARTS LIST
LIST
Item No.
Description
Qty.
Part No.
525
Rear adjustment cushion holder
2
OSPREY-525
532
11X18X24 bushing
2
OSPREY-532
538
15XL400XT3.0 EVA sheet
1
OSPREY-538
541
M6X12 Screw
2
OSPREY-541
542
Main frame cross bar
1
OSPREY-542
544
M6X10 Screw
2
OSPREY-544
546
OD58X469mm Rear roller
1
OSPREY-546
549
15X595mm Front roller shaft
1
OSPREY-549
552
OD58X553mm Front roller
1
OSPREY-552
554
OD76X25-ID15 transport wheel
2
OSPREY-554
557
Front transport wheel frame
1
OSPREY-557
558
6004 Bearing
2
OSPREY-558
562
Main frame
1
OSPREY-562
605
M6X70 Allen bolt
3
OSPREY-605
702
Elevation motor power wire(Black)
1
OSPREY-702
703
Elevation motor power wire(Red)
1
OSPREY-703
704
Elevation motor power wire(White)
1
OSPREY-704
705
Elevation and control board connect wire (Blue)
1
OSPREY-705
706
Elevation and control board connect wire (Grey)
1
OSPREY-706
709
Earth cable
1
OSPREY-709
710
Two female head power cable (Red)
2
OSPREY-710
711
Two female head power cable(White)
1
OSPREY-711
712
Handle pulse wire
2
OSPREY-712
713
Blue-grey two core power wire
2
OSPREY-713
715
LOP of elevation motor
1
OSPREY-715
716
Transfer wire
1
OSPREY-716
717
8 PIN computer connect wire
1
OSPREY-717
720
Hand pulse sensor wire
2
OSPREY-720
801
M3X16 Screw
1
OSPREY-801
802
M4X15 Screw
79
OSPREY-802
807
Φ8X14X2 Spring washer
13
OSPREY-807
808
Φ6X10X2 Spring washer
2
OSPREY-808
812
M8 Thin Nut
12
OSPREY-812
814
Φ8.5X20.5X2 Curve washer
2
OSPREY-814
816
Φ4X9X2 washer
28
OSPREY-816
817
M10X45 Bolt
1
OSPREY-817
818
M8X20 Bolt
4
OSPREY-818
819
M25 Spring
2
OSPREY-819
820
M10 Nut
5
OSPREY-820
821
M10X67 Bolt
1
OSPREY-821
824
M8X65 Bolt
1
OSPREY-824
825
M8 Spring
2
OSPREY-825
827
M4.2X11 Screw
2
OSPREY-827
828
M3X8 Screw
2
OSPREY-828
830
Φ16X26X2 Washer
2
OSPREY-830
831
M15 Spring
2
OSPREY-831
832
M10X53 Allen bolt
2
OSPREY-832

10
YOWZA OSPREY TREADMILL
PARTS LIST
Item No.
Description
Qty.
Part No.
833
Φ8.5X17 Washer
2
OSPREY-833
836
M20 C-clip
3
OSPREY-836
837
M10X58 Bolt
4
OSPREY-837
839
M4x12x12 Washer
2
OSPREY-839
840
M3.5X16 Screw
4
OSPREY-840
842
Φ10X20X1.5 Washer
2
OSPREY-842
843
M3X14 Screw
8
OSPREY-843
845
M4.2X15 Screw
2
OSPREY-845
847
M6 Nut
1
OSPREY-847
860
Φ6.5X12.6X1.25 Washer
3
OSPREY-860
863
M8X38 Bolt
4
OSPREY-863
864
M8X25 Screw
8
OSPREY-864
865
M10X38 Bolt
2
OSPREY-865
866
Φ6.4X24X2 Washer
2
OSPREY-866

http://www.yowzafitness.com/
11
ASSEMBLY
(A) Remove your treadmill from the carton and place it on the floor in an open area.
(B) Remove the treadmill and all the components and hardware from the box.
(C) Check the quantities of all components and hardware with the component and hardware lists on pages 5-6.
(D) After verifying inventory if there are any missing parts please contact Yowza fitness at 877-969-9240.
.

12
YOWZA OSPREY TREADMILL
STEP1
ASSEMBLY
STEP2-A). Rotate the Uprights up to vertical position.
STEP2-B). Using the M8x58mm Bolt (837) to secure the upright
to frame by 6mm Allen Key(B).
STEP2-C). Attach the Upright fix bolt cover-right (221) to the frame, then
attach the Upright fix bolt cover-left (258) to the frame
837
X4
221
X1
258
X1
221
837
837
258

http://www.yowzafitness.com/
13
STEP2
ASSEMBLY
STEP1-A). Rotate the Console up.
STEP1-B). Using the M8X12 Allen head bolt (126) to secure the console
Support tube to upright by 5mm Allen Wrench(D).
STEP1-C). Attach the Handlebar (267) into the Console Support Tube up ,
Using the M8X12 Allen head bolt (126) to fix them together by 5mm
Allen Wrench(D) or 5mm Allen Key(A)
126
X6
267
X2

14
YOWZA OSPREY TREADMILL
STEP3
ASSEMBLY
STEP3-A). Attached the Left Handlebar cover–inside(264) into upright,
STEP3-B). Adjust the left handlebar inside cover position, keep the cover in the
side of upright then push in.
STEP3-C). Attached the Right Handlebar cover–outside(265) into upright
STEP3-D). Adjust the Right handlebar outside cover position, keep the plastic PIN
is relative then push in.
STEP3-E). Fixed #264 and #265 together using M3X14 Screw (843)
STEP3-F). Repeat the same operation as 1-5 and assembly the right handlebar
cover, first inside cover #263 then outside cover #262.
Your treadmill is now fully assembled.
843
X8
264
X1
265
X1
262
X1
263
X1
843
264 263
262
265

http://www.yowzafitness.com/
15
ATTENTION
ADJUSTABLE CUSHION
How to adjust the level for treadmill:
You can adjust the Rear adjustment cushion as following show when you unfold treadmill on the floor
21

16
YOWZA OSPREY TREADMILL
EXPLODED DIAGRAM
845
802
131
802 802
110
109
130
132
138
135
145
147
840
802
802

http://www.yowzafitness.com/
17
EXPLODED DIAGRAM
257
720
251
801 801 801
256
262
126
267
264 843
126
126
265
273 239
244
221
231
837
242
802
231 261
267
235
248
126
235
248
263
243
259
258
802
837
231
218
802
802

18
YOWZA OSPREY TREADMILL
EXPLODED DIAGRAM

http://www.yowzafitness.com/
19
EXPLODED DIAGRAM

20
YOWZA OSPREY TREADMILL
EXPLODED DIAGRAM