YUNEEC H520 User manual

Assembly Instrucons

Thank you for purchasing the H520 Bumper Cage.
The Bumper Cage has been developed to increase the operaonal safety of the aircra and get
closer to objects with condence and reduced risk of impacng propellers.
Each system is hand nished to ensure quality and is shipped with a re-usable case to store all
parts when not in use.
Spare parts can be ordered from the Yuneec UK website. (www.yuneec.uk)
IMPORTANT
Before assembling the cage please ensure all the parts are included. If any are missing please
contact Yuneec immediately.
Care should be taken during assembly and dissassembly that the rods do not cause injury.
Beware of the sharp points on the carbon rods when handling them.
An assembly video is available on the Yuneec website. www.yuneec.uk

2
Motor Arm Clips x 6
Leg Clips x 2 Leg Inserts x 4
Top Cross Joint x 1
Top Cross Rods x 3
Outer Ring Rods x 6
Front & Rear Rods x 4
Side Rods x 2
ASSEMBLY PARTS
Toothpick x 1 (supplied on page 14)

1
3
Leg Clips x 2
1
2
3456

4
Leg Inserts x 4
2
1
2
4
3
56

5
Motor Arm Clips x 6
3
1
2
3

6
4

7
4Outer ring assembly x 6
1
2

8
Side Rods Assembly x 2
5
1
3
2
4

9
6
1
2
3
Front & Rear Rod Assembly x 4

10
Top Cross Assembly x 1
Top Cross Rods x 3
7
12
3

11

12

13

14

Yuneec Ltd.
Technical & Flight Centre
Asheton Farm, Tysea Hill,
Stapleford Abbos
Romford
RM4 1JU UK
Tel [phone]
Email : [email protected]
www.yuneec.uk
Specicaons
Dimensions: 855mm (w)
850mm (l)
440mm (h)
Weight: 235g