Z-Wave.Me WIREN BOARD 7 User manual

Z-WAVE.ME WIREN BOARD 7
USER MANUAL
ZMEEWB7-ZW-ZB
ZMEEWB7-ZW-ZB-KNX
WirenBoard 7 full manual
https://z-wave.me/manual/
wirenboard-7

2
Power
Status LED
1x MicroSD
Wi-Fi/BLE
USB Host
Zigbee
*not included **only for model ZMEEWB7-ZW-ZB-KNX with built-in KNX
V out
KNX**
2x RS-485
Mod Out 3
CAN
1-Wire
Mod Out 2
Z-Wave
5V out
2x Ethernet
2x USB-C: Debug
console + network
3x AI/DI/DO
1x DI/DO
Socket for
input/output
module
Modem GSM*
4G/NB-IoT (2x SIM)

3
PRODUCT DESCRIPTION
WirenBoard 7 is a modular programmable controller
for automation of apartments, houses and offices.
The controller can work with wired and wireless
sensors and actuators. Support for the Z-Wave™
and Zigbee wireless home automation protocols
isprovided by a special expansion board and Z-Way
software by the Z-Wave.Me. The controller has passed
Z-Wave certification, which guarantees compatibility
with all certified Z-Wave devices.
The main advantages of the controller:
• open HTTP/JS/C API for interacting with devices
• integration with iRidi visualization systems
• mobile apps for iOS, Android
• integration with other smart home systems, like
HomeAssistant, OpenHAB, NodeRed, etc.
• voice assistants: Google Assistant, Amazon's Alexa,
Apple's Siri
• scripts allows you to implement flexible house
management rules, create schedules, run scenarios
• full information about the capabilities of devices,
about routes in the network, convenient diagnostic
tools for the Z-Wave network
• secure remote access for management from
anywhere in the world without using a static IP
The WirenBoard 7 controller contains the 7th
generation Z-Wave chip, which provides the following
modern features:
• direct line of sight transmission distance of 1.6 km
in Z-Wave Long Range mode
• Smart Start for a trouble-free deployment of a big
installation
• high data transfer rate of 100 kb/sec allows you
totransfer data faster, it saves battery power
• the Z-Wave Plus™ v2 certification standard
guarantees compatibility of devices from different
manufacturers
• mandatory for all devices, S2 encryption protects
against listening to the radio
The WirenBoard 7 also contains an EFR32MG21chip,
which provides communication with Zigbee and
Thread.

4INSTALLATION GUIDELINES
• Connect the ethernet cable to the connector
Ethernet 1
• Connect the 9–48V power supply to the terminals
GND and V+
• Turn on the switch on the lid
• Wait for the controller to load, the indicator will
flash green
• Go to https://find.z-wave.me to find out the IP
address of the controller in your local network.
• Also, you can view the IP address of the controller
onthe router
• In local network go to the controller address
http://IP:8083
• When you first log in, set the administrator
password and email
• It is recommended to change the SSH access
credentials.
• Bydefault login: root, password: wirenboard.
To change it connect via SSH, enter the passwd
command and enter the new password twice.
KNX, Z-WAVE, ZIGBEE
The controller supports simultaneous operation
inwireless Z-Wave and Zigbee networks and wired
KNX network. This allows you to combine different
automation technologies and benefit from a large
number of different devices available for your smart
home project.
KNX is designed for installation in large houses due
to the reliability of the wired connection.
Z-Wave allows retrofit installations as well as
extending KNX installations with high-quality and
functional devices.
Zigbee opens the door to a broad range
ofinexpensive devices.

5

6
SmartHome UI is the main web interface for working with Z-Wave devices.
SmartHome UI is used to manage devices and configure home automation scenarios.
OPERATING THE DEVICE

7
Expert UI is designed for advanced setup of Z-Wave devices.
Allows you to get complete information about the Z-Wave network, to diagnose and optimize.

8
WirenBoard UI is used to work with wired peripherals, manage system settings
and configure hardware inputs/outputs.

9
MOBILE APP
Dashboard Automation Events

10 TECHNICAL DETAILS
General
CPU ARM Cortex A7 4 core 1.2 GHz
RAM DDR3 RAM 2 GB
FLASH 64 GB TLC BiCS5
Dimensions
Width, DIN-units 6
Sizes (H x W х D) 106 x 90 x 58 mm
Weight (with box) 235 g
Operating
conditions
Air temperature 0 ... +75 °C
Humidity Up to 92%, without condensation of moisture
Warranty period 2 years
Service life 5 years
Interfaces
KNX 1 — only for ZMEEWB7-ZW-ZB-KNX
RS-485 2
CAN 1 — multiplexed with one of RS-485
microSD slot up to 25 MB/s 1
Wx ports: 1-Wire interface/digital input 2
Ax ports: digital/analog input and output
"open collector" 3
Port D1: digital input/output "open collector" 1

11
Communications
Ethernet 10/100 2 (the first of the ports with Passive PoE)
USB Host (USB-A) 1
Debug Network (USB-C)
USB network card for quick configuration of the controller.
Important: When the port is connected to the computer,
USB 1 is disconnected
Wi-Fi 802.11n 1 AP, client
Bluetooth 4.0 1
Z-Wave 700 Series Chip 868.42 MHz
Zigbee MG21 Series Chip 2.4 GHz (can be converted to BLE or
Thread, Matter ready)
SIM-cards 2 x SIM, one is online at the same time
Power
Voltage 9–48 V DC
Power consumption 3 W
Power scheme from a high voltage input
Power inputs 2 on the terminals, 1 Passive PoE on the first Ethernet port
Outputs for powering
external devices
Vout
The power supply voltage of the controller is applied
to the terminals, but with current limitation, program
shutdown and state preservation when the controller
isrebooted
5Vout 5 V — with current limitation and software shutdown
Modules Slots for internal expansion modules
3 with terminals, 1 without terminals
(two are occupied with Z-Wave and Zigbee modules, and
one with KNX module)
Other connectors For external BIOS I/O modules, for backup power module

You can contact us using the form
on the website https://help.z-wave.me
or by writing to us directly by e-mail:
[email protected]
suppor[email protected]