Zadro Z' FOGLESS ULTRA III User manual

“Z’ FOGLESS”™
ULTRA III
SHOWER
MIRROR
INSTRUCTIONS
1 Year Limited Warranty
Zadro products include a 1 Year limited warranty from date of purchase against defects
in materials and workmanship. This warranty does not include damage to the product
as a result of misuse or accident.
Should your product become defective during the warranty period, Zadro Products,
Inc.™ will repair or replace (at our sole discretion) your product, at no charge. However,
you are responsible for properly packing your product and any applicable shipping
charges to Zadro Products, Inc.™
Please contact our Customer Service at 800-468-4348, 714-892-9200 or email
[email protected] on how to obtain an RMA (return authorization
number). Please have available and/or include a copy of your receipt, model number
(ZDW05) and the issue you are experiencing with your product.
CUSTOMERS OUTSIDE THE UNITED STATES OF AMERICA, PLEASE CONTACT THE
RETAILER OF PURCHASE DIRECTLY TO RESOLVE ANY PRODUCT WARRANTY ISSUES.
Any product returned for preference is subject to a 20% restocking fee of the product
and no shipping charges will be refunded.
Zadro Products, Inc.™ shall not be liable for any incidental or consequential damages
arising out of defects in this product, whether or not caused by its negligence.
Some states do not allow the exclusion or limitation of incidental or consequential
damages or allow limitations on how long an implied warranty lasts, so the above
limitations or exclusions may not apply to you. This warranty gives you specic legal
rights and you may also have other rights, which vary from state to state.
Thank you for your purchase! Please visit us
online to leave comments, reviews, & see more
exciting new products from www.ZadroInc.com
© Zadro Products, Inc.TM
Huntington Beach, CA
Phone: [phone]
Fax: [phone]
E-mail: [email protected]
Website: www.ZadroInc.com
Rev. 10052017

“Z’ FOGLESS”™ ULTRA III DUAL SIDED
TELESCOPING WATER SHOWER MIRROR
Model Number: ZDW05
READ ALL INSTRUCTIONS BEFORE USE
FEATURES
• Get the best & closest shave in the warmth of your shower!
• Fogless 1X & 3X shaving mirror has a telescoping arm for
optimal viewing positioning.
• Choose the desired magnication of 1X or 3X by easily
swiveling mirror, then position it to either side of the
showerhead to shave or attend to other personal grooming.
• Other features include two (2) 9” diameter optical
quality glass mirrors, razor/accessory holder, & telescoping arm.
• Easy installation that ts all standard showers with ½” threaded
shower arm.
• Chrome Finish
• Position mirror at any angle desired.
CARE AND MAINTENANCE
• For best mirror quality, clean with a soft, non-abrasive cloth.
DO NOT SCRATCH.
• To avoid water spots on mirror surface, position mirror in area
without water overspray from shower.
• Some water can leave water spots on mirror surface. This is
normal, simply clean the mirror surface.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
MOUNTING INSTRUCTIONS
Z’Fogless Ultra III attaches easily to any standard
½” threaded shower arm. If your present shower
arm has an integral ball joint, replace with standard
threaded shower arm which most hardware stores
carry.
Step 1 - Unscrew shower head from shower arm.
When using tools, make sure you do not damage the
surface. (Fig.1)
Step 2 - Seal the exposed shower threads with
Teon™ tape, available in most hardware stores or
rub with a bar of soap. (Fig.2)
Step 3 - Screw on the adapter until rmly attached to
the shower arm. Do not over-tighten. Loosen rotation
knob in front of the arm to position Z’Fogless Mirror
where desired, then tighten nut. (Fig.3)
Step 4 - Re-attach the shower head by screwing it
onto adapter. (Fig.4)
Step 5 - With the mirror attached to the shower
head turn the adjustment knob on the arm clockwise
to slightly unscrew the product at the arm. Do not
unscrew all the way. Hold the mirror portion in your
hand and pull away from the shower head. This
portion extends up to 5 ½”. Do not extend mirror
more then 5 ½” or the mirror will detach from the
arm. Once you have the mirror extended to the
desired length, tighten the adjustment knob.
Step 6 - Insert the razor holder on the mirror at
about the 4 O’clock position. (Fig.5)
Note: Water will drain
very slowly from the
bottom of the water
mirror. Do not obstruct
water drainage.