ZALMAN GS1000 User manual

www.zalman.com
English version
◈ Please read this manual thoroughly before installation.
◈ Please visit the GS1000 web page at Zalman’s website to view the GS1000
installation video.
E-mail: [email protected]
GS1000

GS1000
2
The specifications of any product may change without prior notice to improve performance
1. Cautionary Notes 3
2. Specifications
3. Components 5
. Installation Guide 8
5. Zalman’s Recommendations 18
▣Contents

3
English
The specifications of any product may change without prior notice to improve performance
GS1000
(1) Check the condition of the product and its components before installation. If
there is a problem with the product and/or its components, please contact the
retailer for replacement.
(2) Refrain from inserting ob ects into the system while it is powered ON to avoid
harm to the user and/or product.
(3) Check the manual when connecting cables to prevent short circuiting and
risk of fire.
(4) Do not block any of the air vents.
(5) Keep unit away from heat sources such as direct sunlight, as well as water, oil,
and humidity. Place the unit on a level and stable area that is well-ventilated.
(6) Do not clean any surface with chemical cleaners or solvents.
(chemicals including but not limited to: industrial brightener, wax, benzene,
alcohol, paint thinner, mosquito repellent, aromatics, lubricant, detergent etc.)
(7) If this unit needs to be transported long distances, please ensure that all Hot
Swap HDD’s are securely fastened before transport. Also, please place the
GS1000 in its original packaging for transport.
◈◈Disclaimer
Zalman Tech Co., Ltd. is not responsible for any damages due to external
causes, including but not limited to improper use, problems with electrical
power, accident, neglect, alteration, repair, improper installation, or
improper testing.
1
Cautionary Notes

GS1000
The specifications of any product may change without prior notice to improve performance
Enclosure Type Full Tower
Enclosure Dimensions 585 mm X 220 mm X 520 mm
(D W H) (18.9 x 8.7 x 17.7 )
Weight 12kg (26.4lb)
Materials Aluminum/ Plastic (ABS)/ steel (GI)
Motherboard Compatibility E-ATX / Standard ATX / microATX
PSU Compatibility Standard ATX / ATX12V
PCI/AGP Card Compatibility Full Size
5.25 External Bay x 4
5.25 Bays *2 Adaptors & Bezels included for
use of two 5.25 bays as
3.5 Internal(HDD)/External(FDD) Bays
3.5 Internal Bay x 6
3.5 Bays - Hot Swap Bay x 3(standard)
- Regular/Hot Swap Bay x 3(optional)
Top Vent : 120mm Fan Vent x 2
(1 Fan included, 1 optional)
Cooling Components (Fans) Rear Vent : 120mm Fan Vent x 1
(1 Fan included)
Bottom Vent : 120mm Fan Vent x 2
(Fans optional)
E pansion Card Slots
(Tool Free Bolts provided) 7 Slots
USB Port x 2
Front I/O Ports IEEE1394(FireWire) Port x 1
Headphones x 1
Mic x 1
Drive Bays
(Tool Free
Bay Kit
provided)
2
Specifications

5
English
The specifications of any product may change without prior notice to improve performance
GS1000
(1) GS1000
Back View Top View
Side View
Icon Description
Tools required for assembly
Front View
Headphones
POWER
Mic IEEE 1394
USB 2.0
3
Components

GS1000
6
The specifications of any product may change without prior notice to improve performance
(2) GS1000 Diagram and Parts Table
Item Part Name Qty
1 HDD Cover 2
2 HDD Tray 6
3 2 In 1 Bracket 2
4 5.25"Bay Cover 2
5 Chassis 1
6 Top Cover 1
Item Part Name Qty
7 Aluminum Door 2
8 PSU Bracket 1
9 PSU Fan Bracket 1
10 Rear Foot 1
11 Front Foot 1

7
English
The specifications of any product may change without prior notice to improve performance
GS1000
(3) Included GS1000 Parts
Diagram Part Specification Qty Description
Foot
(FRONT/REAR)
CPU
12V Extension
Cable
M/B Stand Off
HDD
Screws
PSU
Screws
ODD, M/B
Screws
Foot Fixing
Screws
FDD Cover
For Power
Cable
(8PIN)
PH #6-32*6
(Silver)
PHM
#6-32*12
(Black)
PHM
#6-32*6
(Silver)
PWH M3*6
(Black)
PWH M3*12
(Black)
ABS
M/B Power Extension
Cables
Use with microATX
M/Bs
HDD fixing bolt
PSU Screws
M/B Screw
ODD Screws
Foot Screws
For FDD Installation
ABS+Spray
(matches case
color)
Enclosure Support1
1
20
12
24
8
4
1
Cable Tie ABS I/O Cable Routing10

GS1000
8
The specifications of any product may change without prior notice to improve performance
(1) Installation of the Front & Rear Feet
(2) Removal of the Side Panels
Front Foot
Rear Foot
PWH M3*12
4
Installation Guide

9
English
The specifications of any product may change without prior notice to improve performance
GS1000
(3) Installation of the Power Supply
1) PSU Bracket Removal
2) PSU Bracket Installation
#6-32*6
TYPE
TYPE
TYPE
TYPE

GS1000
10
The specifications of any product may change without prior notice to improve performance
(4) Installation of the M/B and Add-On Card(s)
1) M/B Installation
2) Graphic Card Installation
micro ATX motherboards
Server motherboards
#6-32*6

11
English
The specifications of any product may change without prior notice to improve performance
GS1000
(5) 5.25 and 3.5 Drives
1) 5.25 Drive Panel Removal
2) 5.25 ODD Drive Installation

GS1000
12
The specifications of any product may change without prior notice to improve performance
3) 5.25 Bay FDD / HDD installation
1 FDD Installation
2 HDD Installation
M3 * 5

1
2
13
English
The specifications of any product may change without prior notice to improve performance
GS1000
(6) HDD Installation
1) 3.5 HDD Tray Removal
1. Press both corners towards the center.
2. Pull the handle with another finger or hand.

GS1000
1
The specifications of any product may change without prior notice to improve performance
2) 3.5 HDD Installation
3) HDD Installation
Please make sure that the HDD assembly is not upside-down and install
as shown in the diagram to insure normal operation (The HDD LED lights
up under normal operation).
1 2
3 4
5 6
3.5"HDD
3.5"HDD 3.5"HDD
Push the hooks as shown in the
diagram
Note) To transport a fullly assembled system, use a bolt to fixate the HDD
lock as shown in figure.
Diagram of released hooks.
#6-32*12

15
English
The specifications of any product may change without prior notice to improve performance
GS1000
To use the Hot Swap HDD features, SATA and Power Cables must be
connected to the Hot Swap PCB.
Note) For safe installation and removal of HDD’s, please turn the computer
OFF before proceeding.
SATA cables not provided with the GS1000. Please purchases or use that
of another source.
(7) Hot Swap Installation
1) Hot Swap Cables
A
B
C
A
B
C
Back Front
Hot Swap PCB
SATA Cable Power Cable

GS1000
16
The specifications of any product may change without prior notice to improve performance
(8) Power Button / LED and Front I/O Cables
1) Power Cable
If the Power LED Connector is installed in reverse the power
LED will not operate properly. Please refer to the
motherboard’s manual before connecting the Power LED.

17
English
The specifications of any product may change without prior notice to improve performance
GS1000
2) Front I/O Cables
Precautions for Cable Connections
Please refer to the motherboard’s manual when connecting the
USB 2.0, IEEE1394a and audio connectors.
Do not connect the USB2.0 connector to the IEEE1394a
connector, or vice versa. This may cause serious damage to the
product.
The diagram above is a simplified representation and certain
motherboards may have different configurations for the
IEEE1394a, USB2.0, and audio connectors. Please refer to the
motherboard’s manual.
Note)

GS1000
18
The specifications of any product may change without prior notice to improve performance
5
Zalman’s Recommendations
(1) Use of an optional 120mm fan on the top panel of the case
will improve cooling performance.
(2) Use of an optional 120mm fan on the bottom panel of the
case will improve cooling peformance as well.
1) Installing 1 Fan

19
English
The specifications of any product may change without prior notice to improve performance
GS1000
2) Installing a 2nd Fan
(3) Adding a 2nd Hot Swap PCB (optional)
(4) Zalman Recommended Products for GS1000
CNPS9700
CPU Cooler
GV1000
VGA Cooler
ZM-F3 LED
LED Fans
ZM850-HP
PSU
ZM-NBF47
Northbridge
Cooler