ZALMAN Z-MACHINE GT900 User manual

English
Z-MACHINE GT900
◈ Please read this manual thoroughly before installation.
◈ Visit our website and view the Z-MACHINE GT900 installation video
first to ease the installation process.
E-mail: [email protected]
www.zalman.co.kr www.zalmanusa.com
English v rsion
www.zalman.co.kr www.zalmanusa.com

2
Z-MACHINE GT900
The specifications of any product may change without prior notice to improve performance.
▣Tabl of Cont nts
1. Saf ty Notic s 3
2. Compon nts 4
3. Sp cifications 6
4. Front Pan l Buttons and I/O Ports 7
5. Installation Guid 8

3
The specifications of any product may change without prior notice to improve performance.
Z-MACHINE GT900
English
1
Safety Notices
(1) Check the condition of the product and its components before installation. If
there is a problem with the product and/or its components, please contact the
retailer for replacement.
(2) Avoid insertin any objects into the system while the power is ON. It may be
harmful for the user and product.
(3) Check the manual when connecting cables. Incorrect
connections can lead to fire resulting from short circuit.
(4) The vents on the front and rear panels must not be blocked.
(5) Keep this unit away from heat sources and direct sunli ht, as well as from
water, oil, and humidity. Place the unit on a flat, leveled, solid, and well-
ventilated area.
(6) Do not clean the product surface with chemicals or wet cloth. (chemicals:
industrial bri htener, wax, benzene, alcohol, paint thinner, mosquito
repellent, aromatics, lubricant, deter ent etc.)
Disclaim r
Zalman Tech Co., Ltd. is not responsible for an damages due to
external causes, including but not limited to, improper use, problems
with electrical power, accident, neglect, alteration, repair, improper
installation, and improper testing.

4
Z-MACHINE GT900
The specifications of any product may change without prior notice to improve performance.
2
Components
(1) Z-MACHINE GT900 Main Chassis

5
The specifications of any product may change without prior notice to improve performance.
Z-MACHINE GT900
English
DDiiaaggrraammPPaarrtt NNaammeeSSppeecciiffiiccaattiioonnQQttyyFFuunnccttiioonn
3mm
(Silver)
4 * 8
(Black)
Φ6*12*M3*3
(Silver)
PHM
#6-32*10
(Black)
PWHM 3*5
(Black)
PHM 3*8
(Black)
White = 5V
Black = 12V
1
2
2
6
22
2
1
For removing and reinstalling
the Allen Bolts of the Right-F
Plate during ODD installation
Spare Allen Bolts for
enclosure maintenance
For motherboard (microATX)
installation
For PSU installation (For use
with GT900 only)
For ODD & motherboard
installation
For FDD installation
For Fan RPM adjustment
(2) Acc ssori s
(3) ZM-MC1 (Multi Conn ctor)
[ Installation ]
1) ZM-MC1 is a dual volta e adaptor for adjustin the RPM of the front and rear
panel fans. It is connected to the 4-Pin connector of the PSU as shown below.
2) Connect the enclosure fan to a connector with the volta e desired by the user.
(120mm, 92mm FAN).
- 5V : 900 RPM ~ 1200 RPM
- 12V : 1800 RPM ~ 2800 RPM
Allen Wrench
Spare
Allen Bolts
M/B Stand Off
PSU
Screws
ODD, M/B
Screws
FDD Screws
ZM-MC1
(Multi Connector)

6
Z-MACHINE GT900
The specifications of any product may change without prior notice to improve performance.
3
Specifications
EEnncclloossuurree TTyyppeeTower
EEnncclloossuurree DDiimmeennssiioonnss480mm X 220mm X 450mm
((DD ××WW ××HH))(18.9”× 8.7”× 16.9”)
WWeeiigghhtt12.4kg (27.2lb)
MMaatteerriiaall Aluminum 5T
MMootthheerrbbooaarrdd CCoommppaattiibbiilliittyyStandard ATX / microATX
PPSSUU CCoommppaattiibbiilliittyyStandard ATX / ATX12V
PPCCII//AAGGPP CCaarrdd CCoommppaattiibbiilliittyyFull Size
DDrriivvee BBaayyss3.5" Bay × 4
5.25" Bay × 4
CCoooolliinngg CCoommppoonneennttss
Front Vents: 92mm x 2
Rear Vents: 120mm x 1
EExxppaannssiioonn CCaarrdd SSlloottss7 Slots
USB Port × 2
FFrroonntt II//OO PPoorrttssIEEE1394(FireWire) Port x 1
Headphones × 1
MIC × 1
AAvvaaiillaabbllee CCoolloorrBlack

7
The specifications of any product may change without prior notice to improve performance.
Z-MACHINE GT900
English
4
Front Panel Buttons and I/O Ports
① System Power Button
② System Power LED
③ System HDD Power LEDs (1~2)
④ System Reset Button
⑤ Audio (Headphones, MIC), USB 2.0, IEEE1394 Port
①
②
③
④
⑤

8
Z-MACHINE GT900
The specifications of any product may change without prior notice to improve performance.
5
Installation Guide
(1) Enclosur Disass mbly
Unscrew the two Bolts (Bolt, FH M3x6) as shown in the dia ram to open the
Door.
(2) Pow r Supply Installation
Place the PSU on the Power Bracket, and screw the four Bolts (Bolt, PHM #6-
32*10 (Black)) from outside the enclosure.

9
The specifications of any product may change without prior notice to improve performance.
Z-MACHINE GT900
English
(3) Moth rboard Installation
Install the motherboard onto the enclosure. Now install the computer
components (CPU, VGA, RAM, etc.) onto the motherboard.
참고)
To install a microATX motherboard, first install the 2 enclosed microATX
Stand Offs to ali n the hei ht with the ATX Stand Offs.
To install a microATX motherboard,
additional M/B Stand Offs must first be
installed onto the Right Plate before
installing the motherboard.
M/B Stand Off

10
Z-MACHINE GT900
The specifications of any product may change without prior notice to improve performance.
(4) 5.25 & 3.5 Driv Installation
1) Remove the Bay Covers of the 5.25 (ODD) and 3.5 (FDD) bays.
2) Fix the ODD / FDD in place with the use of Fixin Bolts (M3x5) on either
sides of the ODD / FDD.
How to remove the ODD / FDD Bay Cover To install the ODD or FDD on the
5.25 and 3.5 Bays, the correspondin FDD / ODD Bay Cover must first be
removed.
①Right-F Plate
② ODD
Screw
FDD Bay
Cover
ODD/FDD Bay Cover
Screw Removal
FDD Bay
Cover
Door

11
The specifications of any product may change without prior notice to improve performance.
Z-MACHINE GT900
English
(5) Hard Disk Driv Installation
1) Basic Installation
①Open (raise) the HDD Lock Bar of the HDD Chassis°Ø Bay where
the HDD will be installed.
②Slide in the HDD into the Bay and close (lower) the HDD Lock Bar
behind the HDD.
③To remove the HDD, open (roll up) the HDD Lock Bar above the
HDD.
Note) Excessive pressure ma damage the HDD Lock Bars. Please
take cautionar measures during HDD installation and
removal.
HDD Lock Bar
Fixing Screw Hole
HDD Lock Bar
Fixing Screw

12
Z-MACHINE GT900
The specifications of any product may change without prior notice to improve performance.
2) Locking Installation
Note) For movin the assembled enclosure, please fix the HDD Lockin Device
into place as shown on the dia rams.
※Pressin the HDD sli htly into the HDD Chassis with one hand, while rotatin
the HDD Lock Bar with the other, allows easy ali nment of the Lock Groove
and Fixin Screw Hole.
Ali n the Lock Groove of the
HDD Lock Bar with the Fixin
Screw Hole.
Unscrew the HDD Lock Bar’s Fixin
Screw from the HDD Chassis with a
Phillips screwdriver.
Screw the Fixin Screw into the Fixin
Screw Hole to lock the HDD Lock Bar
into place.
Lock Groove
Tool Free Bolt
Tool Free Fixing
Screw Hole
①②
③④

13
The specifications of any product may change without prior notice to improve performance.
Z-MACHINE GT900
English
(6) Cabl Conn ction
1) Button PCB Connection
※Improper connection of the Power LED and HDD LED can lead to LED
malfunction.
Please refer to the motherboard manual before makin cable
connections.

14
Z-MACHINE GT900
The specifications of any product may change without prior notice to improve performance.
Note)
2) Front I/O Connections
※※Precautions for Cable Connections
▶Please refer to the motherboard manual for connectin the USB 2.0,
IEEE1394a, and audio connectors.
▶Do not connect the USB2.0 connector to the IEEE1394a connector. It will
cause serious dama e to the product.
▶Do not connect the IEEE1394a connector to the USB2.0 connector. It will
cause serious dama e to the product.
▶Certain motherboards may have a different confi uration for the
IEEE1394a, USB2.0, and audio connectors from the one shown in the
dia ram above. Please refer to the motherboard manual.