Zamp Solar MEGA KIT User manual

ZampSolar.com [phone]
MEGA KIT QUICK START GUIDEMEGA KIT QUICK START GUIDE
OBSIDIAN®100w (x4-6)
(ZSK1007)
Expion360 120a/h
Lithium Batteries (x1-2)
(BAT1003)
1-Port ATP Cap
(CAP1002)
ATP ROOF CAP
(CAP1001)
CINDERTM 40
Charge Controller
(SCC1005)
OBSIDIAN®Portable
100W Unregulated (x 1-2)
(USP2004)
Integration Kit
(KIT5019)
STEP 1: INSTALL BATTERIES
(EXPION360 BATTERY USER MANUAL)
100Ah USER MANUAL
120Ah USER MANUAL
STEP 2: INSTALL CINDER™40 AND ROOF CAP
CINDER™40 Integration Kit Instructions.
Roof Cap Mounting Instructions.
MEGA KIT LAYOUT

ZampSolar.com [phone]
MEGA KIT QUICK START GUIDE
STEP 3: INSTALL THE ATP SIDEWALL PORT
Side Wall Port Instructions.
STEP 4: INSTALL ROOF PANELS
‒Lay out roof panels according to one of the below images.
‒Install mounting feet to roof panels and mount to roof following the
instructions.
STEP 5: CONNECT SOLAR PANELS TO ROOF CAP
IMPORTANT: Ensure no more than 3x100W OBSIDIAN®SERIES panels
per roofcap port.
400W
Follow this image for 400W
installation.
A. Using the provided ATP Y-cable,
connect two panels together.
B. Run the 20ft lead from the roof
cap to the ATP Y-cable output.
C. Repeat A and B for the
remaining 2 panels.
D. Ensure your solar circuit
breaker is in the “On” Position.
E. Verify CINDER™40 is now
charging the batteries. 

LOCATIONS
ATP ROOF CAP


ZampSolar.com [phone]
MEGA KIT QUICK START GUIDE
600W
Follow this image for 600W
installation.
A. Connect 2 ATP Y-cables to roof cap
ports.
B. Connect remaining 2 ATP Y-cable
outputs to each 15ft ATP extension
cable.
C. Connect the 15ft ATP extension
cables to one side of each of the
roof cap Y-ports.
D. Connect the 20ft ATP extension
cable to the other side of each of
the roof cap Y-cables.
E. Connect each 20ft ATP cable
directly to a panel.
*Typically these will be the
furthest from the roof cap.
F. Connect remaining 4 panels to
available Y-cable inputs.
G. Verify 3 panels per roof cap port.
H. Ensure your solar circuit breaker is
in the “On” Position.
I. Verify CINDER™40 is now charging
the batteries.
STEP 6: CONNECT OBSIDIAN®
SERIES PORTABLE SOLAR PANELS
Portable Connection Instructions.


LOCATIONS
ATP ROOF CAP

