Zanussi 200340 User manual

ZANUSSI
P R O F E S S I O N A L
GAS FRYERS - 23 LT
N 900
Model 200340
RIGHT SIDE DOOR FOR OPEN BASE CUPBOARD 1 1 1
REAR FLUE UPSTAND FOR SMALL CHIMNEY 1
LEFT SIDE DOOR FOR OPEN BASE CUPBOARD 1
2 HALF SIZE BASKETS FOR HD FRYERS 1 2 1
INCLUDED ACCESSORIES
Net weight - kg. 57 115 65
gas 20 40 19
Power - kW
Maximum Well Capacity -lt 21, 23 21, 23 21, 23
Thermocople safety valve l l l
height 575 575 365
depth 400 400 400
width 340 340 350
Usable well dimensions - mm
N° of wells 1 2 1
height adjustment 50 50 50
height 850 850 1200
depth 900 900 900
width 400 800 400
External dimensions - mm
Power supply Gas Gas Gas
NFRG420
200340
NFRG820
200341
NFRG401
200361
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
N 900: a range of over 150 models
for the professional caterer designed
to guarantee the highest level of
performance, reliability, energy
saving, safety standards and
ergonomic operation. These
concepts are reflected in the total
modularity of the range that ensures
innumerable configurations, either
free-standing, bridged or cantilever.
N900 demonstrates how advanced
technology can satisfy the needs of
the professional caterer.
The models detailed on this sheet
are 23 litres fryers in gas version.
The model 200361 is a gas tube
fryer particulary recommended for
the floured product.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Burners with optimized
combustion, flame failure device and
protected pilot light.
� Working temperature from 120ºC
to 190ºC.
� Appliances are supplied for use
with natural gas, with LPG
conversion jets supplied as standard.
� All models have right-angled side
edges to allow flush-fitting joins
between units, eliminating gaps and
possible dirt traps.
� Additonal overheat safety
thermostat.
� Worktop in 20/10 stainless steel.
Front and side panels in stainless
steel with Scotch Brite finish.
� Oil drainage via a tap into a
drainage container positioned under
the well thus simplifying the
consumed oil management and
guaranteeing the operator safety.
� The units are supplied, as
standard, with 2 half baskets for
each well.
� Feet in stainless steel 50 mm
adjustables in height.
� The special design of the control
knob system guarantees against
water infiltration.
� Door with handles in stainless
steel.
� All models can be installed on
cantilever system.
� Main connections can be via the
base of the unit.
� All models provided with service
duct to facilitate installation.

BACM2 2009-10-05 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
UNCLOGGING ROD F.23LT FRYER DRAIN.PIPE 927227 927227
SUPPORT FOR "BRIDGE" SYSTEM 800 MM 206137 206137 206137
SUPPORT FOR "BRIDGE" SYSTEM 400 MM 206154 206154 206154
SUPPORT FOR "BRIDGE" SYSTEM 1600 MM 206141 206141 206141
SUPPORT FOR "BRIDGE" SYSTEM 1400 MM 206140 206140 206140
SUPPORT FOR "BRIDGE" SYSTEM 1200 MM 206139 206139 206139
SUPPORT FOR "BRIDGE" SYSTEM 1000 MM 206138 206138 206138
SIDE HANDRAIL-RIGHT/LEFT HAND 206165 206165 206165
SEDIMENT TRAY FOR 23 LT FRYER 206173 206173
RIGHT SIDE DOOR FOR OPEN BASE CUPBOARD 206194 206194 206194
REAR FLUE UPSTAND FOR SMALL CHIMNEY 206159
REAR FLUE UPSTAND FOR LARGE CHIMNEY 206160
PRESSURE REGULATOR FOR GAS UNITS 927225 927225 927225
PAIR OF COVERING STRIPS FOR END ELEMENTS 206234 206234 206234
OIL FILTER FOR FRYERS 206143 206143 206143
MATCHING RING FOR FLUE CONDENSER 150DIAM 206133
LEFT SIDE DOOR FOR OPEN BASE CUPBOARD 206195 206195 206195
LARGE HANDRAIL(PORTIONING SHELF)800 MM 206186 206186 206186
LARGE HANDRAIL(PORTIONING SHELF)400 MM 206185 206185 206185
JUNCTION SEALING KIT 206086 206086 206086
HYGIENIC LID FOR 23 LT FRYERS 206201 206201 206201
FRONTAL KICKING STRIP FOR 23 LT FRYER 206203 206203 206203
FRONTAL KICKING STRIP 800 MM 206176 206176 206176
FRONTAL KICKING STRIP 400 MM 206175 206175 206175
FRONTAL KICKING STRIP 200 MM 206174 206174 206174
FRONTAL KICKING STRIP 1600 MM 206179 206179 206179
FRONTAL KICKING STRIP 1200 MM 206178 206178 206178
FRONTAL KICKING STRIP 1000 MM 206177 206177 206177
FRONTAL HANDRAIL 800 MM 206167 206167 206167
FRONTAL HANDRAIL 400 MM 206166 206166 206166
FRONTAL HANDRAIL 1600 MM 206192 206192 206192
FRONTAL HANDRAIL 1200 MM 206191 206191 206191
FRONT.KICK.STRIP F.CONCRETE INST.800 MM 206148 206148 206148
FRONT.KICK.STRIP F.CONCRETE INST.400 MM 206147 206147 206147
FRONT.KICK.STRIP F.CONCRETE INST.200 MM 206146 206146 206146
FRONT.KICK.STRIP F.CONCRETE INST.1600 MM 206152 206152 206152
FRONT.KICK.STRIP F.CONCRETE INST.1200 MM 206151 206151 206151
FRONT.KICK.STRIP F.CONCRETE INST.1000 MM 206150 206150 206150
FLUE CONDENSER FOR 1 MODULE DIAM.150MM 206156
FLANGED FEET KIT 206136
EXTENSION FOR OIL DRAINAGE 206209 206209 206209
DRAUGHT DIVERTER WITH 150 MM DIAMETER 206132
DRAUGHT DIVERTER WITH 120 MM DIAMETER 206126 206126
DEFLECTOR FOR FLOURED PRODUCTS-23L FRYER 960645 960645
CHIMNEY UPSTAND 800MM 206304
CHIMNEY UPSTAND 400MM 206303 206303
4 WHEELS (2 WITH BRAKE) 206188
4 FEET FOR CONCRETE INSTALLATION 206210 206210 206210
2 SIDE KICKING STRIPS F.CONCRETE INSTAL. 206157 206157 206157
2 SIDE KICKING STRIPS 206180 206180 206180
2 SIDE COVERING PANELS H=700 D=900 206134 206134 206134
2 SIDE COVERING PANELS FOR TOP-D=900MM 206278 206278 206278
2 HALF SIZE BASKETS FOR HD FRYERS 927223 927223 927223
1 FULL SIZE BASKET FOR HD 900 FRYERS 927226 927226 927226
NFRG420
200340
NFRG820
200341
NFRG401
200361
ACCESSORIES MODELS
OPTIONAL ACCESSORIES
G - Gas connection 3/4" 3/4" 3/4"
NFRG420
200340
NFRG820
200341
NFRG401
200361
LEGEND
200340, 200341 200361