Zaor ComboDesk Combo 61 Sit Stand User manual

Combo 61 Sit Stand
Assembly Manual

1
2
4
3
10
11
5
6
7
11
The assembly of your desk uses special kits.
Here's how to use them
1) On the piece with the threaded
insert(s) , put in the system bolt(s)
and tighten making sure to align the
hole in the system bolt at a 90º angle.
Please note that the system bolt may have
a little slack in this position, which is fine!
2) Ensure that the hole in the bolt
aligns with the opening in the other
piece to be able to put in the safety
screw.
3) In each hole in the second piece, put
in a cone shaped safety screw and
tighten with a cross screw driver -
without forcing.
The 2 parts will now be safely
attached.
Thanks for choosing a piece of furniture from Zaor. Before you can enjoy
the use of it you need to build it. We tried to put all the explanations
necessary for a safe build, when in doubt please get in touch or check out
our Youtube channel where we are putting more and more assembly
videos to help you with this important task. Enjoy!
General technique for putting together Zaor desks
8
9

Slider 1 (L) Slider 2 (L) Slider 1 (R)Slider 2 (R)
Left Right
How to disassemble the slider (L) How to disassemble the slider (R)

STEP 1
3
10
5
6
7
Type S2
Plastic Insert
Slider 2 (R+L)
Type S3
1st 90 mm
2nd 110 mm
3rd 130 mm
4th 150 mm
hl
l min 540
l max 1040
1st
2nd
3rd
4th
1
Slider 1 (R) / (L)
2
Type W
h
l

STEP 2
STEP 3
STEP 4
2
1
3
2
1
3
4
Use screws Type F (Legs Box)
F
ST4.2
x15

STEP 5 STEP 6
5
6
7
Fix Rack Rail with screws Type RS
5
6
7
8
8
Use screws Type E
STEP 7

STEP 8
D
AD
AD
A
DA
10
Use screws Type A
Use screws Type D
STEP 10
9
10
STEP 9
Use screws Type E
Use screws Type S2
Step 7 Legs Manual
Connect all cables to the adaptor
Control Box
Handset
12
14
Adapter
Adaptor holder
7
11

11
11
Type W
Wooden dowels m6x30 mm m6x100 mm
3.5x20 mm
Hex wrench
Plastic insert
Rack rail
Rack rail screws Rack units screws
PACKING LIST:
x23
Slider 300mm
Type A
x3 Type D x3
Type I
x24
Type R
x4
Type Rs
x8 Type Ru
x24
Type S2
x10
Type H
x1
Type Sl
x2
TOOLS:
35 mm
If you don't need the rack units don't fix the rack rails and use the
pieces number 11 to close the holes
3.5x30 mm
Type S3
x6
Assembly Kits
x6
Euro Screws
Type E
x7