Zaor Vela Plain User manual

Vela Plain

PHASE 1
Position the foot n° 1 as per drawing. Lower down desktop, part n° 2.
Align the holes and fix using M 6x70 screws in the holes from below
the foot (n° 1). See add-on sketch 1.
2 tabletop
MATERIALS USED
- structure: MDF, solid wood, fiber glass ;
PACKING LIST
- 2 parts
-4 screws M 6x70
Instructions for use and cleaning
-clean with a soft cloth, slightly humid or specific
products for wood or lacquer
-avoid the use of abrasive cleaners!
We recommend being two when assembling the desk.
Enjoy!
Sketch 1
1
1 foot
1
2
Thank you for choosing a piece of Zaor
studio furniture, which will hopefully
make your life easier, more ergonomic
and improve the looks of your
workspace.
Before you can enjoy the comfort of
your new acquisition you need to
assemble it.
We have tried to give you as much detail
as needed and as little as possible.
Should you run into any difficulty with
this assembly you can get in touch with
us via [email protected] to
set up a Skype session or phone call.