Zebex Z-6070 Series User manual

Z-6070
Hands-Free Dual-Laser Omnidirectional Scanner
Service Guide
Revision History
Changes to the original manual are listed below:
Version Date Description of Version
1.0 Sept. 2, 2010 Initial release
2.0 Aug 5, 2013 Updated to new parts and procedures

SERVICE GUIDE
Preface
Important Notice
This equipment generates, uses and can radiate radio frequency energy. If not installed and used in accordance
with the instructions in this manual, it may cause interference to radio communications. The equipment has been
tested and found to comply with the limits for a Class A computing device pursuant to EN55022 and 47 CFR, Part 2
and Part 15 of FCC Rules. These specifications are designed to provide reasonable protection against interference
when operated in a commercial environment.
For CE-countries:
It is in conformity with the CE standards. Please note that a CE-Marked power supply unit should be used to
conform to these standards.
Radio and television interference
Operation of this equipment in a residential area can cause interference to radio or television reception. This can be
determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or
more of the following measures:
Re-orientate the receiving antenna
Relocate the device with respect to the receiver
Move the device away from the receiver
Plug the device into a different outlet so that the device and the receiver are on different branch circuits
If necessary, the user should consult the manufacturer, an authorized dealer or experienced radio/television
technician for additional suggestion. The user may find the following booklet prepared by the Federal
Communications Commission helpful:“How to ldentify and Resolve Radio-TV Interference Problems”. This
booklet is available from the U.S. Government Printing Office,
Washington, DC 20402, Stock No. 004000003454.
No warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of
merchantability or fitness for a particular purpose. We are not liable for any errors contained herein nor incidental or
consequential damages in connection with furnishing, performance or use of this material.
No part of this document may be reproduced, transmitted, stored in a retrieval system, transcribed, or translated
into any language or computer language in any form or by any means electronic, mechanical, magnetic, optical,
chemical, manual or otherwise, without express written consent and authorization.
We reserve the right to make changes in product design without reservation and without notification. The material
in this guide is for information only and is subject to change without notice.
All trademarks mentioned herein, registered or otherwise, are the properties of their various respective owners.
This manual is in A4 format. Please check your printer setting before printing it out.
Z-6070 Service Guide 2 / 10

SERVICE GUIDE
Table of Contents
Preface..........................................................................................................................................................................2
Important Notice ....................................................................................................................................................................2
Table of Contents..........................................................................................................................................................3
Introduction...................................................................................................................................................................4
Product Overview...................................................................................................................................................................4
Scanner Parts..........................................................................................................................................................................6
Take Apart ....................................................................................................................................................................7
Before You Start....................................................................................................................................................7
Important Instructions ..................................................................................................................................................7
Tools to Prepare .....................................................................................................................................................................7
Z-6070 Service Guide 3 / 10

SERVICE GUIDE
Introduction
It is the first dual-laser presentation scanner in the world with numerous record-breaking key features. Its pioneered
application of dual laser diodes drastically enhance scanning power by doubling up scan lines, broadening scan
angle and intensifying scan pattern across scan field. With this state-of-art technology, it is able to deliver the most
comprehensive 32-line scan pattern empowering 2400 scans per second, In addition, it is equipped with Z-SCAN+
technology, which is an innovative ASIC hardware decode technology to provide real-time decode capability to
effectively shorten customer transaction time.
Its broad scan field could effectively facilitate scanning barcodes on products in all kinds of shapes. Moreover, it is
designed for both hands-free and handheld applications. To scan large merchandise that cannot be placed on the
counter, sales clerks could easily pick up from its stand to perform the product scan. While scanning multiple
barcodes on one object, sales clerks could switch it to single line scan option simply by pressing one button. The
adjustable stand design grants users the flexibility to set the easiest angle of scan. Furthermore, it is programmed
with multiple beeper tones and barcode data edition function for different applications.
Product Overview
Button
Good
Read
Buzzer
LED
Front
Scan
Window
Interface
Connector Adjustable Stand
Z-6070 Service Guide 4 / 10

SERVICE GUIDE
Description Function
Wake up
scanner
When the scanner enters into the sleep mode,
pressing this switch can wake the scanner up. The
sleep mode feature can be programmed by using the
menu labels from the Programming Guide.
The default time-out setting for the
sleep mode is to switch off laser after
10 minutes, and switch off motor
after 30 minutes.
When the scanner is in sleep mode,
the LED is intermittently flashing red.
Single -
line
pattern
Pick up the scanner, press and release the trigger to
activate the single line scan mode
Button
Beeper
tone
selection
When the scanner is sitting in the adjustable stand,
press down this button for 5 seconds, and it will
automatically change the beeper volume.
LED
A
red LED indicates the scanner is ready to read a barcode
while a green LED indicates a good read.
Good Read
Buzzer
If the data is captured correctly, the buzzer will be heard. Both
the volume and frequency are programmable by using the menu
labels from the Programming Guide.
Adjustable
stand
This stand allows you to direct the scan pattern in a way that is
the best for your application by adjusting the scanner window
forward or backward.
Power Link
interface
cable
Connect the external AC/DC power adaptor into the power jack
on the power link cable.And the interface connector provides the
communication between the scanner and host terminal
Z-6070 Service Guide 5 / 10

Z-6070 Service Guide 6 / 10
SERVICE GUIDE
Scanner Parts
The scanner includes the following parts:
NO. P/N Name Quantity
866-070000-210 Front case assemble (White) +LED cover
1 866-070BK0-211 Front case assemble (Black) + LED cover 1
866-070000-312 Back case assemble
2 866-070BK0-313 Back case (black) assemble 1
3 684-200000-172 Dust cover 1
560-060700-561 Decorative panel
4 560-060700-562 Decorative panel (black) 1
560-060700-571 Front case frame
5 560-060700-572 Front case frame (black) 1
6 866-070000-514 Center mirror base assembly 1
7 602-000000-061 Shock absorbing rubber (OD12.0-ID6.0*8.0) 6
8 160-204100-060 4Pin Pitch 1.0mm, Wire to Board cable 1
9 521-014000-020 Self tapping screw,M3-20.0mm, round, Philip’s head 4
10 521-00B000-5R5 Self tapping screw, M1.7-5.5mm, round, Philip’s head 4
11 521-003000-8R0 Self tapping screw,M2-8.0mm, round, Philip’s head 1

SERVICE GUIDE
Take Apart
Before You Start
Important Instructions
•Read these instructions completely before you begin.
•Follow all instructions.
•Heed all warnings.
Tools to Prepare
•Philips screwdriver.
Please follow these steps to take apart Z-6070.
1. Remove the 4 screws (521-014000-020）from the back case as illustrated.
2. Separeate the front case of the scanner.
Z-6070 Service Guide 7 / 10

SERVICE GUIDE
3. Remove the connector from the main board（circled in red）.
4. Remove the connector (circled in red）.
5. Remove the 4Pin Pitch 1.0mm, Wire to Board cable.
Z-6070 Service Guide 8 / 10

SERVICE GUIDE
6. Remove the 3 Shock absorbing rubbers (circled in red) from the back case and remove the screw pointed by
red arrow（521-003000-8R0）.
7. Remove the decorative panel from the back case.
8. Remove the 4 Shock absorbing rubbers and the 4 screws (521-00B000-5R5）illustrated in red arrows.
Z-6070 Service Guide 9 / 10

Z-6070 Service Guide 10 / 10
SERVICE GUIDE
9. Separate the front case, dust cover, front case frame, shock absortbing rubbers, and the screws.