Zeiss Axiocam 208 color User manual

User Guide
ZEISS Axiocam 208 color / 202 mono
Microscope Camera

 Content ZEISS
Content
1 About this guide ................................................................................................... 5
1.1 Introduction ................................................................................................. 5
1.2 Explanation warning messages and additional information ........................... 5
1.3 Text formats and conventions....................................................................... 6
2 Safety .................................................................................................................... 7
2.1 Prevention of hazards ................................................................................... 7
2.2 Limitation of liability ..................................................................................... 8
2.3 Warranty ...................................................................................................... 8
2.4 Intended use ................................................................................................ 8
2.5 Warning labels ............................................................................................. 8
2.5.1 Position of the warning labels ............................................................ 9
2.5.2 Meaning of the warning labels........................................................... 9
3 Technical data....................................................................................................... 10
3.1 Axiocam 208 color ....................................................................................... 10
3.1.1 Specifications..................................................................................... 10
3.1.2 Spectral sensitivity.............................................................................. 12
3.2 Axiocam 202 mono...................................................................................... 12
3.2.1 Specifications..................................................................................... 12
3.2.2 Spectral sensitivity.............................................................................. 14
3.3 Applied standards and regulations ................................................................ 14
3.3.1 Symbols on the camera...................................................................... 15
3.3.2 Symbols on the adapter..................................................................... 15
4 Shipment............................................................................................................... 19
4.1 Axiocam 208 color ....................................................................................... 19
4.2 Axiocam 202 mono...................................................................................... 20
5 Connecting the camera......................................................................................... 21
5.1 Camera layout and accessories ..................................................................... 21
5.1.1 Camera connections .......................................................................... 21
5.1.2 Camera controls ................................................................................ 21
5.1.3 Accessories........................................................................................ 22
5.2 Mounting the camera to the microscope ...................................................... 24
5.3 Connecting the camera to the power supply................................................. 25
5.3.1 Powering the camera via microscope ................................................. 25
5.3.2 Powering the camera via mains supply............................................... 25
5.4 Connecting the camera to a display (without PC) .......................................... 26
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 3

 Content ZEISS
5.5 Connecting the camera to a network............................................................ 26
5.5.1 Connecting camera via Ethernet ........................................................ 27
5.5.2 Connecting camera via Wi-Fi adapter................................................. 27
5.6 Connecting the camera to a certified PC ....................................................... 28
5.7 Function indicator signals ............................................................................. 29
6 On Screen Display (OSD) menu............................................................................. 30
6.1 Opening the OSD menu................................................................................ 30
6.1.1 Opening menu via camera's operator panel ....................................... 30
6.1.2 Opening menu via microscope stand buttons..................................... 30
6.1.3 Opening menu via network browser .................................................. 31
6.2 Home menu ................................................................................................. 31
6.3 Settings menu .............................................................................................. 34
6.3.1 Image Settings menu......................................................................... 35
6.3.2 Microscope System menu .................................................................. 36
6.3.3 Operating System menu..................................................................... 38
7 Installing software and drivers ............................................................................ 42
7.1 Installing software on PC .............................................................................. 42
7.2 Installing software on iPad............................................................................ 42
8 Acquiring images and videos ............................................................................... 43
8.1 Introduction ................................................................................................. 43
8.2 Basic procedure using operator panel ........................................................... 43
8.3 Basic procedure using OSD menu ................................................................. 43
8.4 Image acquisition with Labscope .................................................................. 44
9 Troubleshooting.................................................................................................... 45
9.1 ZEN software................................................................................................ 45
9.2 Camera ........................................................................................................ 46
9.3 Labscope...................................................................................................... 47
10 Maintenance plan ................................................................................................. 48
10.1 Optical system .............................................................................................. 48
10.2 Cleaning the infrared filter or protective glass ............................................... 48
10.3 Updating the firmware ................................................................................. 49
11 Disposal and recycling.......................................................................................... 50
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 4

1 About this guide | 1.1 Introduction ZEISS
1 About this guide
1.1 Introduction
Welcome to the Axiocam 208 color / Axiocam 202 mono user guide.
These cameras are multi-functional digital CMOS cameras for use in light microscopy applications.
To make it easier for you to set up the camera, please follow the instructions in these chapters
step by step.
Content Chapter Content
About this guide Introduction and overview of this manual.
Safety Important information on the safe handling of the camera.
Read this chapter before unpacking and operating the
camera.
Technical data Here you will find your camera's technical data.
Shipment The contents of delivery and optional attachments will be
described here.
Connecting the camera In this chapter, you will find detailed instructions on con-
necting and using the camera.
OSD menu This chapter lists the functions of the On Screen Display
(OSD) menu.
Installing software and drivers Here you will learn how to install the software and camera
drivers.
Acquiring images This chapter provides the basics of image acquisition.
Troubleshooting In this chapter, we have listed some solutions to various
problems. If you are still unable to solve your problem, con-
tact ZEISS support.
Maintenance This chapter describes some measures for the maintenance
and care of your camera. In case of greater damage, always
contact ZEISS support.
Disposal and Recycling Important instructions for disposal and recycling.
1.2 Explanation warning messages and additional information
The safety notes in this document follow a system of risk levels, defined in the following manner:
CAUTION
Risk of personal injury
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate personal injury.
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 5

1 About this guide | 1.3 Text formats and conventions ZEISS
NOTICE
Risk of property damage
NOTICE indicates a property damage message. In addition, NOTICE is used for data loss or cor-
rupt data.
Info
Indicates useful additional information. It helps you to make your daily work easier, but it is op-
tional. There is no risk for personal injury or property damage involved.
1.3 Text formats and conventions
Bold texts
Bold is used for texts within the software like names of GUI elements (e.g. buttons, sections,
tools, menus), buttons on a device, and product names (e.g. MTB 2011).
Font type "Courier"
Used for programming code, e.g. macro code as well as for any-
thing that you would type literally when programming, includ-
ing keywords, data types, constants, method names, variables,
class names, and interface names.
Shortcuts and key commands
Shortcuts are written like Crtl+C, meaning you should press Crtl-Key and C-Key simultaneously.
Procedures
The following formats are used for procedures (instructive sequences):
Prerequisite üstands for a condition which must be fulfilled before starting with the action.
1. stands for a single step the user is asked to perform.
Web-Links
Web links appear in blue text. To open the linked website, simply click on the link. Please make
sure you have an internet connection established before opening the web link.
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 6

2 Safety | 2.1 Prevention of hazards ZEISS
2 Safety
2.1 Prevention of hazards
The Axiocam 208 color and Axiocam 202 mono have been manufactured and tested by ZEISS ac-
cording to the regulations specified in CE and has left the manufacturer’s premises in perfect
working order. In order to ensure that this condition is maintained and to avoid any risks when
operating the system, the user must comply with any notes and warnings contained in this man-
ual. The manufacturer shall be exempt from statutory liability for accidents should the operator
fail to observe the safety regulations.
CAUTION
Personal Injury
To avoid personal injury, read and adhere to the safety notes below.
4To avoid the risk of fire or explosion, do not use the camera near inflammable liquids or
gases.
4Setup, expansions, re-adjustments, alterations, and repairs must be carried out only by
persons who have been authorized by ZEISS.
4Do not allow any cables, particularly power cords, to trail across the floor, where they can
be snagged by people walking past.
4Protect the cables from excessive heat (e.g. halogen lamps, microscope fluorescence illu-
mination).
4To avoid injuries due to potentially high surface temperatures, do not touch the camera's
surface for a prolonged time.
4Do not position the equipment in a way that makes it difficult to operate or disconnect the
device.
NOTICE
To avoid equipment damage, data loss, or corrupted data, read and adhere to the safety notes
below.
4Protect the camera against mechanical impact. External damage may affect the operation
of inner components.
4Keep chemicals and fluids away from the camera.
4Make sure there is sufficient ventilation of the camera head. Avoid direct exposure to sun-
light and locations near heat sources (radiators, stoves). Overheating can cause noisy im-
ages.
4Use the camera in a clean and dry location.
4Attach all connectors firmly and securely.
4Use only the accessories supplied by ZEISS, when applicable.
4Use only normal microscope cleaning material to clean the camera housing.
4Contact your local ZEISS service organization if a repair is necessary. Do not disassemble
the camera by yourself, otherwise the warranty will be lost.
4Save all your data, such as images, measurement data, archives, reports, forms and docu-
ments, at regular intervals on an external storage medium. Otherwise it cannot be avoided
that access to this data may be lost as a result of operational errors or hardware defects.
ZEISS accepts no liability for consequential damage resulting from insufficient data protec-
tion.
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 7

2 Safety | 2.2 Limitation of liability ZEISS
2.2 Limitation of liability
No warranty shall be assumed by ZEISS during the warranty period if the equipment is operated
without observing the safety regulations. In any such case, ZEISS shall be exempt from statutory li-
ability for accidents resulting from such operation.
2.3 Warranty
ZEISS shall be exempt from any warranty obligations should the user fail to observe the safety reg-
ulations. ZEISS only guarantees the safety, reliability, and performance of the system if the safety
notes are closely observed.
2.4 Intended use
The Axiocam 208 color and the Axiocam 202 mono are high definition cameras for color and
monochromatic imaging, respectively. They are suitable for use as accessories for educational and
routine microscopy in laboratory environments and for use by trained laboratory personnel. The
cameras have been designed to be used in the field of light microscopy for general observation,
routine work, and simple applications in which a sufficient amount of light is available.
Info
These cameras should only be used for training and research. The images / videos from these
cameras must not be used for the direct generation of diagnostic results.
2.5 Warning labels
All points that may pose special risks are additionally marked by warning labels (pictograms) on
the camera. These warning labels indicate possible dangers. They are part of this instruction man-
ual. They are to be kept in a clean and legible state. Warning labels that are damaged or no
longer clearly legible must be replaced immediately. Always observe all warning labels on the
camera.
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 8

2 Safety | 2.5 Warning labels ZEISS
2.5.1 Position of the warning labels
1
Fig.1: Warning labels on the camera
2.5.2 Meaning of the warning labels
The meaning of each warning label is explained below.
No. Symbol Description
1
Follow the notes in the instruction manual
and the supplied documents. For more infor-
mation, see Prevention of hazards [ } 7].
Tab.1: List of attached Warning Labels
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 9

3 Technical data | 3.1 Axiocam 208 color ZEISS
3 Technical data
3.1 Axiocam 208 color
3.1.1 Specifications
Features Values
Sensor type CMOS sensor with rolling shutter
Sensor Size Diagonal 8.1 mm (1/2.1")
Effective Sensor Pixel Count 8.3 Megapixels: 3840 (H) x 2160 (V)
Pixel size 1.85 μm
Spectral Sensitivity Approx. 400 nm – 700 nm, IR filter RGB
Bayer color mask
Selectable Resolution 3840 x 2160 (Ultra HD, 4K)
1920 x 1080 (Full HD, 1080p)
Gain (Signal Amplification) 1x – 22x adjustable
Digitization 3 x 8 bit / pixel
Exposure Time Range (Integration time) 0.06 ms - 1 s
Image enhancement functions Active denoising, active sharpening, auto
white balance, HDR
Automatic features Automatic exposure and gain regulation at
Ultra HD resolution (4K), fast live image un-
der low light conditions
Status-LED for camera Color coded operation status
Interfaces HDMI for monitor
USB 3.0 Type-C for USB hub, flash drive, Wi-
Fi adapter or PC connection
Ethernet (RJ45) for LAN connection
Micro-D for power and communication with
dedicated stands
Wi-Fi compatibility Via USB Wi-Fi adapter and router
Optical Interface C-mount
Camera control buttons for stand-alone 1x Image capture
1x OSD (On Screen Display menu)
1x Camera factory reset
Stand-alone operation:
§Image storage format
§Video stream format
§Live frame rate via HDMI
§tiff or jpg
§mp4
§30 fps @ Ultra HD (4K)
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 10

3 Technical data | 3.1 Axiocam 208 color ZEISS
Features Values
Maximum live frame rate at configuration:
§HDMI
§Ethernet
§USB 3.0
@ 4K (3840 x 2160)
§30fps
§-
§15 fps
Maximum live frame rate at configuration:
§HDMI
§Ethernet
§USB 3.0
@ 1080p (1920 x 1080)
§30 fps
§30 fps
§27 fps
Max. file size per image .tiff up to: 24 MB (not content dependent)
.jpg up to: approx. 0.5 MB – 3.3 MB (content
dependent)
Size/ Weight Approx. 135 x 97 x 54mm / 590 g
Housing Blue painted aluminum and cooling fins on
the top plate
Registration CE, RoHS, CSA
Power supply via Micro-D interface
Power consumption Max. 9 W (24 V DC, 0.75 A)
Environmental conditions for storage and op-
eration
+10°C to +40°C, max. 75% relative air hu-
midity at 35°C, no condensation, free air cir-
culation required, indoor use
Environmental conditions for transport in
packaging
-40 °C to +70 °C, max. 75 % relative air hu-
midity at 35 °C
Operating systems:
§for ZEN
§for Labscope
§Windows 10 x64 Prof./Ultimate and higher
§Windows 7/10 x64 Prof./Ultimate and iOS
v12 and higher
Supported Application Software ZEN blue v3.0 and higher (includes ZEN lite/
pro/system)
Labscope v2.9 (win) and v2.8.3 (iOS) and
higher
Order number 426570-9000-000
Info
Computer hardware, operating system, and software may decrease the frame rates. All specifi-
cations are subject to change without notice.
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 11

3 Technical data | 3.2 Axiocam 202 mono ZEISS
3.1.2 Spectral sensitivity
Fig.2: Spectral sensitivity of Axiocam 208 color
3.2 Axiocam 202 mono
3.2.1 Specifications
Features Values
Sensor Type CMOS sensor with global shutter
Sensor Size Diagonal 13 mm (1/1.23")
Effective Sensor Pixel Count 2.1 Megapixels: 1920 (H) x 1080 (V)
Pixel size 5.86 μm
Spectral Sensitivity Approx. 350 nm – 850 nm, protection glass
(coated)
Selectable Resolution 1920 x 1080 (Full HD, 1080p)
Gain (Signal Amplification) 1x – 16x adjustable
Digitization 12 or 8 bit / pixel
Cooling Passive cooling
Exposure Time Range (Integration time) 0.3 ms - 2 s
Image enhancement functions Active denoising, active sharpening
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 12

3 Technical data | 3.2 Axiocam 202 mono ZEISS
Features Values
Automatic features Automatic exposure and gain regulation at
Full HD resolution (1080p), fast live image
under low light conditions
Status-LED for camera color coded operation status
Interfaces HDMI for monitor
USB 3.0 Type-C for USB hub, flash drive, Wi-
Fi adapter or PC connection
Ethernet (RJ45) for LAN connection
Micro-D for power and communication with
dedicated stands
Wi-Fi compatibility Via USB Wi-Fi adapter and router
Optical Interface C-mount
Camera control buttons for stand-alone 1x Image capture
1x OSD (On Screen Display menu)
1x Camera factory reset
Stand-alone operation:
§Image storage format
§Video stream format
§Live frame rate via HDMI
§tiff or jpg
§mp4
§30 fps @ Full HD (1080p)
Maximum live frame rate at configuration:
§HDMI
§Ethernet
§USB 3.0
@ 1080p (1920 x 1080)
§30 fps
§30 fps
§27 fps
Max. file size per image 12bit .tiff: 4 MB (one channel, not content
dependent)
8bit .tiff: 2 MB (one channel, not content de-
pendent)
8 bit .jpg: approx. 0.1 MB – 1.3 MB (content
dependent)
Size/Weight Approx. 135 x 97 x 54mm / 590 g
Housing Blue painted aluminum and cooling fins on
the top plate
Registration CE, RoHS, CSA
Power supply via Micro-D interface
Power consumption Max. 9 W (24 V DC, 0.75 A)
Environmental conditions for storage and op-
eration
+10°C to +40°C, max. 75% relative air hu-
midity at 35°C, no condensation, free air cir-
culation required, indoor use
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 13

3 Technical data | 3.3 Applied standards and regulations ZEISS
Features Values
Environmental conditions for transport in
packaging
-40 °C to +70 °C, max. 75 % relative air hu-
midity at 35 °C
Operating systems:
§for ZEN
§for Labscope
§Windows 10 x64 Prof./Ultimate and higher
§Windows 7/10 x64 Prof./Ultimate and iOS
v12 and higher
Supported Application Software ZEN blue v3.0 and higher (includes ZEN lite/
pro/system)
Labscope v2.9 (win) and v2.8.3 (iOS) and
higher
Order number 426570-9010-000
Info
Computer hardware, operating system, and software may decrease the frame rates. All specifi-
cations are subject to change without notice.
3.2.2 Spectral sensitivity
Fig.3: Spectral sensitivity of Axiocam 202 mono
3.3 Applied standards and regulations
Observe the generally applicable local and national safety and accident prevention regulations, as
well as the applicable laws and regulations in your country. The camera and its accessories have
been designed, manufactured and tested to comply with the guidelines and specifications as
named in the following. The accordance to the relevant specification is indicated by a respective
symbol on the unit.
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 14

3 Technical data | 3.3 Applied standards and regulations ZEISS
3.3.1 Symbols on the camera
Symbol Description
Conforms to:
§EU Directive 2014/34/EU (LVD)
§2014/30/EU (EMC)
§2011/65/EU (RoHS)
Complies with EU Directive 2012/19/EU
(WEEE)
CSA certificate mark, conforms to:
§CAN/CSA-C22.2 No. 61010-1-12
§UL Std. No. 61010-1 (3rd edition)
Tab.2: List of attached labels concerning standards and regulations
3.3.2 Symbols on the adapter
Symbol Description
Compliance of this power supply with FCC
Part 15, Class B has been demonstrated with
a standard output load. (The FCC law stipu-
lates that system-level testing with the actual
system load is required to demonstrate com-
pliance with the FCC emission limits.)
Japan: Voluntary Control Council for Interfer-
ence (VCCI)
Australia and New Zealand: complies with
AN/NZS 60950.1:2011 Inc A1 EN
55032:2012
Book 60335 up to 36volts
Conforms to:
§UL STD. 60950-1
§UL STD. 1310
Certified to:
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 15

3 Technical data | 3.3 Applied standards and regulations ZEISS
Symbol Description
§CSA STD C22.2 NO.60950-1
§CSA STD.C22.2 NO.223
Conforms to AAMI STD. ES60601-1, IEC
60601-1-11
Certified to CAN/CSA STD.C22.2 NO.60601-1
Limited Power Source
Protected against:
§access to hazardous parts with a wire
§solid foreign objects of a diameter of
1.0mm and greater
§vertically falling water drops when enclo-
sure tilted up to 15°
Complies to the specifications of directive
2011/65/EU Annex VI (ROHS-2) with amend-
ment 2015/863-EU (ROHS-3)
Fuse inside: T 1.6A 250VAC
Semko S-Mark, certified to:
§IEC 60601-1:2005+A1
§EN 60601-1:2006+A1:2013+A12:2014
§IEC 60601-1-11:2015IEC
60601-1-11:2015
§EN 60601-1-11:2015
§EN
60950-1:2006+A11:2009+A1:2010+A12:2
011+A2:2013
JAPAN TUV R-PSE, certified to:
§J60950-1(H26)
§J55022(H22)
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 16

3 Technical data | 3.3 Applied standards and regulations ZEISS
Symbol Description
Certified to:
§GB4943.1-2011
§GB9254-2008
§GB17265.1-2012
Complies with:
§Section 301 of Energy Independence and
Security Act (EISA)
§Energy Star tier 2 (North America)
§ECP tier 2 (China)
§MEPS tier 2 (Australia)
§Code of Conduct (Europe)
Complies with CHINA SJ/T 11364-2014 (with
a 30 years’ environmental protection use pe-
riod)
Ukraine: UKRSepro
Complies with:
§ТР ТС 004/2011
§ТР ТС 020/2011
Construction of output connector
CE Mark, tested to comply with:
§EN 55032.2012+AC.2013
§EN 61000-3-2.2014
§EN 61000-3-3.2013
§EN 60601-1-2.2015
§EN 55024.2010
Indoor use only
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 17

3 Technical data | 3.3 Applied standards and regulations ZEISS
Symbol Description
Equipment protected throughout by double
insulation or reinforced insulation
Complies with EU Directive 2012/19/EU
(WEEE)
Tab.3: List of attached labels concerning standards and regulations
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 18

4 Shipment | 4.1 Axiocam 208 color ZEISS
4 Shipment
4.1 Axiocam 208 color
Order No. 426570-9000-000
§1x Axiocam 208 color
§1x Power & signal cable, camera to microscope stand (compatible with Aixolab 5 and Axio-
scope 5/7/Vario)
§1x Power adapter with country-specific plug
§1x USB 3.0 cable, Type-C to Type-A
§1x USB 3.0 flash drive, Type-C and Type-A
§1x USB hub, Type-C
Accessories for Stand-Alone and for Usage with Labscope
Order Number Accessory
000000-0626-248 High-Speed-HDMI-Cable, Premium, Resolu-
tion 4K, 2m
000000-0626-246 Optical USB-Scroll Mouse
000000-0626-245 Keyboard, USB, Language DE
000000-0626-267 Keyboard, USB, Language US
426570-9110-000 Wi-Fi dongle package containing Wi-Fi Don-
gle and USB adaptor Type-C to Type-A
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 19

4 Shipment | 4.2 Axiocam 202 mono ZEISS
4.2 Axiocam 202 mono
Order No. 426570-9010-000
§1x Axiocam 202 mono
§1x Power & signal cable, camera to microscope stand (compatible with Aixolab 5 and Axio-
scope 5/7/Vario)
§1x Power adapter with country-specific plug
§1x USB 3.0 cable, Type-C to Type-A
§1x USB 3.0 flash drive, Type-C and Type-A
§1x USB hub, Type-C
Accessories for Stand-Alone and for Usage with Labscope
Order Number Accessory
000000-0626-248 High-Speed-HDMI-Cable, Premium, Resolu-
tion 4K, 2m
000000-0626-246 Optical USB-Scroll Mouse
000000-0626-245 Keyboard, USB, Language DE
000000-0626-267 Keyboard, USB, Language US
426570-9110-000 Wi-Fi dongle package containing Wi-Fi Don-
gle and USB adaptor Type-C to Type-A
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 20