ZEITRAUM RAIL Snack User manual

ZEITRAUM GmbH •Äußere Münchner Straße 2 •D-82515 Wolfratshausen •Tel + 49 (0) 8171–418130 •Fax + 49 (0) 8171– 418141 •[email protected] •www.zeitraum-moebel.de
6. Mount the cross to the leg. Afterwards, mount the
remaining legs. Assembly is easier when the table is
upside down.
RAIL Snack
abletop up to 90x90 cm
Assembly instructions 07/2022
TOOLS:
Allen key SW 5 (enclosed)
6x XS steel dowels (M6)
8x XS steel dowels (M8)
14x connector housings
14x grub screws
1x cylinder head screw (M8x60) with flat washer
1x dowel (8x30)
Video:
http://www.scheulenburg-direkt.de/index.php?page=content&coID=11
2. Insert the connector housings1. Screw in the XS steel dowels (M8). 3. Join a leg with the mounting block.
4. Tighten the grub screws on both sides of the
block.
5. For the lower cross, screw in the XS
steel dowels (M6) and insert the connector
housings. Join the parts and tighten the grub
screws.
7. Position the legs on the tabletop. 8. Insert the cylinder head screw with the
flat washer.
9. Tighten the screw.
Please assemble the table on a soft surface (e.g. a carpet or blanket) to avoid damages.

1. Assemble the small cross. Screw in the
XS steel dowels (M6), insert the connector
housings and connect the parts.
ZEITRAUM GmbH •Äußere Münchner Straße 2 •D-82515 Wolfratshausen •Tel + 49 (0) 8171–418130 •Fax + 49 (0) 8171– 418141 •[email protected] •www.zeitraum-moebel.de
RAIL Snack
abletop bigger han 90x90 cm
Assembly instructions 07/2022
TOOLS:
Allen key SW 5 (enclosed)
10x XS steel dowels (M6)
8x XS steel dowels (M8)
18x connector housings
18x grub screws
8x cylinder head screws (M6x50) with flat washers
Video:
http://www.scheulenburg-direkt.de/index.php?page=content&coID=11
3. Screw in the XS steel dowels (M8) into
the legs.
4. Push the cross onto the leg and fix the
connection with grub screws.
7. Fix all grub screws on the top side of the
frame.
2. Fix the connection with grub screws.
Please assemble the table on a soft surface (e.g. a carpet or blanket) to avoid damages.
6. Mount the lower cross to the leg. Afterwards,
mount the remaining legs. Assembly is easier
when the table is upside down.
5. For the lower cross, screw in the XS steel
dowels (M6) and insert the connector housings.
Join the parts and tighten the grub screws.
8. Place the frame on the tabletop. Insert the
cylinder head screws with the flat washers.
9. Tighten the screws.