ZelHer P30a User manual

ZelHer®
P30a
USER GUIDE

ENGLISH
ZelHer P30a
Thank you for choosing the ZelHer P30a Bluetooth
headset, please examine the contents of the package to
ensure that you have received all items, please read the
entire full user guide before using the headset.
PACKAGE CONTENTS
•P30a Bluetooth headset
•USB Cable
•User Guide
2

User Guide for P30a
KEY SPECIFICATIONS
Model P30a
•Bluetooth v4.1
•26 Hours: Talk Time
•750 Hours: Standby time
•Enhanced Battery Saver (EBS) Extending battery live up to 8 months
•Working Range: 33ft
•Multipoint Support: (Pair and keeps connections with 2 Bluetooth devices)
•Balanced and Lite Weight
•Fits Comfortably on Either Ear
•Supporting profiles: Headset Profile (HSP), Hand-Free Profile
(HFP), Advanced Audio Distribution Profile (A2DP), Audio/Video
Remote Control Profile (AVRCP)
ENGLISH
3

ENGLISH
ABOUT YOUR ZELHER P30a
1
1Volume Up
Volume Down
2 2 Multifunction Button
3Indicator LED
34USB Charge slot
4
4

GETTING STARTED
• It is important to fully charge the headset, before
starting the pairing process before initial use.
• Recommended Initial charge time is 3-5 hours.
• Do not use the headset while charging.
Note:
• If you do not use your headset for a long period of time,
it is recommended to recharge the headset for at least 3-5
hours before resuming use.
• Recharge unit in places at room temperature between
41°F (5°C) and 104°F (40°C).
ENGLISH
5

ENGLISH
CHARGING THE HEADSET
To Charge the unit:
1. Connect the large end of the USB cable into charger
port.
2. Connect the small end of the USB cable into headset
charging port.
3. Plug the charger into a proper outlet.
4. While charging, the indicator light on headset will
turn red, when charging is complete; the indicator light
will change to blue, flashing once every 10 seconds.
6

Turning on:
Press and hold the Multi-function button (MFB) for 3-5
seconds, the blue light indicator will flash 3 times, and
you will hear a voice prompt saying “Power on”.
Turning off:
Press and hold the MFB for 3-5 seconds; the red light
indicator will flash 3 times, and you will hear a voice
prompt saying “Power off”.
PAIRING THE HEADSET:
Pairing to 1 device
1. Press and hold the MFB for approximately 6-8
ENGLISH
7

ENGLISH
seconds, until the LED light alternates between red and
blue, you will hear a voice prompt saying “pairing”
indicating that it is in pairing mode.
2. Activate the Bluetooth search feature on your phone;
refer to your phone’s manual for further instructions.
3. Select the P30 from the list of devices detected on
your phone or computer.
4. If necessary enter pin code 0000 and accept
connection.
5. When pairing is complete, you will hear a voice
8

prompt saying “your headset is connected” and the LED
will flash blue indicating that your Bluetooth headset is
connected to your phone.
Pairing a 2nd Device:
1. Pair the first phone following the steps above.
2. Temporarily turn off the first connected
phone’s Bluetooth wireless technology function.
3. Pair the second phone using the steps above.
4. Turn off the headset, and once again turn on the first
phone’s Bluetooth wireless technology functionality.
ENGLISH
9

ENGLISH
5. Once again turn on the headset, and it will reconnect
to both devices automatically.
GENERAL FUNCTIONS:
Turning on:
Press and hold the MFB for 3-5 seconds; the blue light
indicator will flash 3 times and you will hear a voice
prompt saying “Power on”. The headset will
automatically attempt to connect with the last device to
which it was paired. Once connected, you will hear a
voice prompt saying “your headset is connected”, and
the blue light will blink once every 10 seconds.
10