Zephyr Pisa ZPI-E24BG Installation guide

WWW.ZEPHYRONLINE.COM
JAN21.0101
Pisa
ZPI-E24BG, ZPI-E24BG290
ZPI-E24BW, ZPI-E24BW290
ZPI-E30BG, ZPI-E30BG290
ZPI-E30BW, ZPI-E30BW290
ZPI-E36BG, ZPI-E36BG290
EN Use, Care, and Installation Guide
FR Guide d’utilisation, d’entretien et d’installation

2Pisa Use, Care, and Installation Guide
PISA
UNDERCABINET
CORE

3
Pisa Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Contents
Page
Safety Information ............................................................................ 4-6
Types of Safety Warnings................................................................... 4
General Safety ..................................................................................4-5
Operation........................................................................................... 6
Electrical Requirements ...................................................................... 6
List of Materials...................................................................................7
Installation Instructions.................................................................... 8-20
Ducting Calculation Sheet.................................................................. 8
Mounting Height, Clearance, & Ducting ...........................................9-10
Ducting Options ................................................................................. 11
Hood Specifications............................................................................12
Electrical Supply.................................................................................13
Cable Lock .........................................................................................13
Preparing the Cabinet........................................................................14
Horizontal Ducting Conversion ...........................................................15
Mounting the Hood.......................................................................... 16-18
Ductless Recirculation .....................................................................19-20
Features & Controls............................................................................ 21
Slide Controls .....................................................................................21
Maintenance ................................................................................... 22-23
Hood & Filter Cleaning.....................................................................22-23
LumiLight LED ................................................................................... 23
Wiring Diagram..................................................................................24
Troubleshooting............................................................................... 25-26
List of Parts & Accessories.................................................................. 27
Notes..................................................................................................28
Limited Warranty ...............................................................................29
Product Registration...........................................................................30

4Pisa Use, Care, and Installation Guide
PISA
UNDERCABINET
CORE
Safety Information
Your safety and the safety of others are very important.
We have provided many important safety messages in this
manual for your appliance. Always read and obey all safety
messages.
This is the Safety Alert Symbol. This symbol alerts you to
potential hazards that can cause severe bodily injury or death.
All safety messages will follow the Safety Alert Symbol and either
the words “DANGER” “WARNING” or “CAUTION”
DANGER
Danger means that failure to heed this safety statement may
result in severe injury or death.
READ AND SAVE THESE INSTRUCTIONS
WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
a) Use this unit only in the manner intended by the
manufacturer. If you have questions, contact the manufacturer.
b) Before servicing or cleaning unit, switch power o at service
panel and lock the service disconnecting means to prevent
power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
General Safety
WARNING
Warning means that failure to heed this safety statement
may result in extensive product damage, serious personal
injury, or death.
CAUTION
Caution means that failure to heed this safety statement
may result in minor or moderate personal injury, property or
equipment damage.
WARNING
To reduce the risk of fire or electric shock, do not use this fan
with any solid-state control device.
WARNING
CAUTION
For General Ventilating Use Only. Do Not Use To Exhaust
Hazardous Or Explosive Materials And Vapors. Take care
when using cleaning agents or detergents. Suitable for use in
household cooking area.
WARNING
WARNING - TO REDUCE THE RISK OF A RANGE TOP GREASE
FIRE:
a) Never leave surface units unattended at high settings.
Boilovers cause smoking and greasy spillovers that may ignite.
Heat oils slowly on low or medium settings.
b) Always turn hood ON when cooking at high heat or
when flambeing food. (i.e. Crepes Suzette, Cherries Jubilee,
Peppercorn Beef Flambe’).
c) Clean ventilating fans frequently. Grease should not be
allowed to accumulate on fan or filter.
d) Use proper pan size. Always use cookware appropriate for
the size of the surface element.

5
Pisa Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Safety Information
WARNING
READ AND SAVE THESE INSTRUCTIONS
WARNING - TO REDUCE THE RISK OF INJURY TO PERSONS
IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE
FOLLOWING:
a) SMOTHER FLAMES with a close-fitting lid, cookie sheet, or
metal tray, then turn o the burner. BE CAREFUL TO PREVENT
BURNS. If the flames do not go out immediately, EVACUATE AND
CALL THE FIRE DEPARTMENT.
b) NEVER PICK UP A FLAMING PAN – You may be burned.
c) DO NOT USE WATER, including wet dishcloths or towels – a
violent steam explosion will result.
d) Use an extinguisher ONLY if:
1) You know you have a Class ABC extinguisher, and you
already know how to operate it.
2) The fire is small and contained in the area where it
started.
3) The fire department is being called.
4) You can fight the fire with your back to an exit
Based on “Kitchen Firesafety Tips” published by NFPA.
WARNING
WARNING
TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.
CAUTION
To reduce risk of fire and to properly exhaust air outside, do
not vent exhaust air into spaces within walls, ceilings, attics,
crawl spaces, or garages.
WARNING
WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
a) Installation work and electrical wiring must be done by
qualified person(s) in accordance with all applicable codes and
standards, including fire-rated construction.
b) Sucient air is needed for proper combustion and
exhausting of gases through the flue (chimney) of fuel burning
equipment to prevent back drafting. Follow the heating
equipment manufacturer’s guideline and safety standards such
as those published by the National Fire Protection Association
(NFPA), and the American Society for Heating, Refrigeration
and Air Conditioning Engineers (ASHRAE), and the local code
authorities.
c) When cutting or drilling into wall or ceiling, do not damage
electrical wiring and other hidden utilities.
d) Ducted fans must always be vented to the outdoors.
e) If this unit is to be installed over a tub or shower, it must be
marked as appropriate for the application and be connected
to a GFCI (Ground Fault Circuit Interrupter) - protected branch
circuit.
WARNING
Prop. 65 Warning for California Residents: This product may
contain chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm.

6Pisa Use, Care, and Installation Guide
PISA
UNDERCABINET
CORE
Safety Information
Operation
ŹAlways leave safety grilles and filters in place. Without these components, operating blowers could catch onto hair, fingers and
loose clothing.
ŹThe manufacturer declines all responsibility in the event of failure to observe the instructions given here for installation,
maintenance and suitable use of the product. The manufacturer further declines all responsibility for injury due to negligence and
the warranty of the unit automatically expires due to improper maintenance.
NOTE: Please check www.zephyronline.com for revisions before doing any custom work.
Electrical Requirements
Important:
ŹObserve all governing codes and ordinances.
ŹIt is the customer’s responsibility to be aware of these below:
ŹTo contact a qualified electrical installer.
ŹTo assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70 latest
edition* or CSA standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No.0-M91 - latest edition** and all local codes
and ordinances.
ŹIf codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path
is adequate.
ŹDo not ground to a gas pipe.
ŹCheck with a qualified electrician if you are not sure the range hood is properly grounded.
ŹDo not have a fuse in the neutral or ground circuit.
ŹThis appliance requires a 120V 60Hz electrical supply and connected to an individual properly grounded branch circuit protected
by a 15 or 20 ampere circuit breaker or time delay fuse. Wiring must be 2 wire with ground. Please also refer to Electrical Diagram
on product.
ŹA cable locking connector (not supplied) might also be required by local codes. Check with local requirements, purchase and
install appropriate connector if necessary.
* National Fire Protection Association Batterymarch Park, Quincy, Massachusetts 02269
** CSA International 8501 East Pleasant Valley Road, Cleveland, Ohio 44131-5575
READ AND SAVE THESE INSTRUCTIONS

7
Pisa Use, Care, and Installation Guide
ZEPHYRONLINE.COM
List of Materials
Parts Not Supplied
Ducting, conduit and all installation tools
Cable locking connector (if required by local codes)
Recirculating kit
Parts Supplied
(3) Wire Nuts
(1) 6” round damper (pre-installed)
(1) hardware package
HARDWARE PACKAGE CONTENTS
(1) LumiLight LED, 6W (24” model)
(2) LumiLight LED, 6W (30” & 36” models)
ĬŚĭŮ
(2) #6 x 1”
(1) hood body with sliding glass
ĬŚĭŮ
(4) M3.5x10 (24” model)
(5) M3.5x10 (30” & 36” models)
(4) M4 x 16mm
(30” & 36” models)
(2) upper installation brackets
(2) lower installation brackets
(24” model only)
(2) M4 x 8
(4) 3/16 x 3/8” (4) 3/16 x 40
(24” model only) (24” model only) (24” model only)

8Pisa Use, Care, and Installation Guide
PISA
UNDERCABINET
CORE
Installation Instructions
Duct pieces To t al
Equivalent number
length x used =
3-1/ 4” x 10”
Rect.,
straight
1 Ft. x ( ) =Ft.
3-1/ 4” x 10”
Rect. to
6” round
transition
5 Ft. x ( ) = Ft.
3-1/ 4” x 10”
Rect. to
6” round
transition
900 elbow
20 Ft. x ( ) = Ft.
6”, 7”, 8”, 10”
Round,
900
15 Ft. x ( ) = Ft.
6”, 7”, 8”, 10”
Round,
450
9 Ft. x ( ) = Ft.
Ft.
6”, 7”, 8”, 10”
Round,
straight
1 Ft. x ( ) =Ft.
Subtotal column1 =
Duct pieces To t al
Equivalent number
length x used =
6”, 7”, 8”, 10”
Round, wall
cap with
damper
30 Ft. x ( ) = Ft.
Ft.
Ft.
Ft.
6”, 7”, 8”, 10”
Round
roof cap
30 Ft. x ( ) = Ft.
Subtotal column2 =
Subtotal column1 =
Total ductwork =
Maximum Duct Length: For satisfactory air movement,
the totalductlength
should not exceed 150 equivalent feet.
6” roundto
3-1/ 4” x 10”
rect.
transition
1 Ft. x ( ) = Ft.
6” roundto
3-1/ 4” x 10”
rect.
transition
900 elbow
16 Ft. x ( ) = Ft.
7” roundto
3 1/ 4” x 10”
rect.
transition
8 Ft. x ( ) = Ft.
7” roundto
3-1/ 4” x 10”
rect.
transition
900 elbow
23 Ft. x ( ) = Ft.
elbow
elbow
7” to 6” or
8” to 7” Round
tapered
reducer
25 Ft. x ( ) = Ft.
3-1/ 4” x 10”
Rect. 900
elbow
15 Ft. x ( ) =Ft.
3-1/ 4” x 10”
Rect. 450
elbow
9 Ft. x ( ) =Ft.
3-1/ 4” x 10”
Rect. 900
flatelbow
24 Ft. x ( ) = Ft.
3-1/ 4” x 10”
Rect.
wall cap
with damper
30 Ft. x ( ) = Ft.
Ft. x ( ) = Ft.
15
6”, 7“, 8”
Round
in-line
damper
Ducting Calculation Sheet

9
Pisa Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Installation Instructions
Mounting Height, Clearance, & Ducting
36”
20” min.
24” min.
32” max.
NOTE: The Pisa minimum mount height for electric cook tops is 20”, but is 24” for gas cook tops.

10 Pisa Use, Care, and Installation Guide
PISA
UNDERCABINET
CORE
Installation Instructions
Mounting Height, Clearance, & Ducting
A minimum of 6” round ducting must be used to maintain maximum air flow eciency.
Always use rigid type metal ducts only. Flexible ducts could restrict air flow by up to 50%.
Also use the ducting calculation sheet (on page 8) to compute total available duct run when using
elbows, transitions and caps.
ALWAYS, when possible, reduce the number or transitions and turns. If long duct run is required,
increase duct size.
If turns or transitions are required; install as far away from hood duct output and as far apart,
between the two as possible.
Minimum mount height between range top to hood bottom should be no less than 20” for electric
cook tops and 24” for gas cook tops.
Maximum mount height should be no higher than 32”.
It is important to install the hood at the proper mounting height. Hoods mounted too low could result
in heat damage and fire hazard; while hoods mounted too high will be hard to reach and will lose its
performance and eciency.
If available, also refer range manufacturer’s height clearance requirements and recommended hood
mounting height above range. Always check your local codes for any dierences.
For shipment and installation damages:
ŹPlease fully inspect unit for damage before installation.
ŹIf the unit is damaged in shipment, return the unit to the store in which it was bought for repair or
replacement.
ŹIf the unit is damaged by the customer, repair or replacement is the responsibility of the customer.
ŹIf the unit is damaged by the installer (if other than the customer), repair of replacement must be
made by arrangement between customer and installer.

11
Pisa Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Installation Instructions
Ducting Options
ŹUse single wall rigid metal ductwork only.
ŹFasten all connections with sheet metal screws and tape all joints w/ certified Silver Tape or Duct
Tape.
Fire Hazard: NEVER exhaust air or terminate ductwork into
spaces between walls, crawl spaces, ceilings, attics, or garages.
All exhaust must be ducted to the outside, unless using the
recirculating option.
WARNING
roof pitch w/
ůćp


ħr
p


ű
ű

12 Pisa Use, Care, and Installation Guide
PISA
UNDERCABINET
CORE
Installation Instructions
Ů
2-3/16” (24”)
5-3/16” (30”)
8-3/16” (36”)
11-1/4”
19-9/16”
9-9/16”
23-7/8” (24”), 29-7/8” (30”), 35-7/8” (36”)
FRONT
11-1/4”
Ø6”
3-7/16”
C/L
BACK
Ø6”
C/L
3/4”
3-7/16”
4-15/16”
TOP SIDE
3-7/16”
9-7/8”
1-1/8”
13/16”
1-1/2”
1-11/16”
3/8”-
2-1/4”*
*adjustable
rear filler
panel
11-1/8”
11-15/16” to 18-3/4”
Closed Open

13
Pisa Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Installation Instructions
Electrical Supply
Electrical wiring must be done by qualified person(s) in
accordance with all applicable codes and standards. Turn o
electrical power at service entrance before wiring.
WARNING
For personal safety, remove house fuse or open circuit breaker before beginning installation. Do not
use extension cord or adapter plug with this appliance.
Follow national electrical codes or prevailing local codes and ordinances.
This appliance requires a 120V 60Hz electrical supply, and connected to an individual, properly
grounded branch circuit, protected by a 15 or 20 ampere circuit breaker or time delay fuse. Wiring
must be 2 wire w/ ground. Please also refer to the Electrical Diagram labeled on product.
Cable Lock
A cable locking connector (not supplied) might be required by local codes. Check with local
requirements and codes, purchase and install appropriate connector if necessary. (FIG. A)
FIG. A
Cable Lock

14 Pisa Use, Care, and Installation Guide
PISA
UNDERCABINET
CORE
Installation Instructions
Preparing the Cabinet
1. Determine and mark center line on wall and cabinet bottom with a pencil.
2. If the cabinet bottom is recessed, wood blocking must be installed to ensure proper alignment of
the hood with the cabinet bottom. Wood blocking should be flush within cabinet bottom.
3. Follow the dimensions in FIG. B and cut-out the bottom of your cabinet to create an opening for
the hood to fit through. For frameless cabinet measure 1-15/16” from the front of cabinet door. For
framed cabinet measure 1-15/16” from front of cabinet bottom.
FIG. B
7” 7-3/4”
7”
*6-3/16”
*11-1/2”
10-1/8”
19-7/8”
C/L
1-15/16”
*Dimension used for rear ducting option
front edge
glass handle
FIG. C

15
Pisa Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Installation Instructions
Horizontal Ducting Conversion
These steps below convert 6” round vertical ducting to horizontal ducting. If you plan on having
vertical ducting, please skip these steps.
1. Remove aluminum mesh filter. From
inside the hood, disconnect blower plug
located toward the right side interior of
hood body.
2. Remove (6) screws from top of hood and
(6) screws from back of hood attaching
blower plate to hood body.
3. Remove blower and blower plate from
hood body and reposition blower to
hood body so blower collar protrudes
from back of hood body. Re-install
blower plate to hood body using the (12)
screws previously removed from step 2.
Re-connect blower plug.

16 Pisa Use, Care, and Installation Guide
PISA
UNDERCABINET
CORE
Installation Instructions
Mounting the Hood
1. Prepare electrical wiring and ducting in cabinet. Location of the junction box and blower outlet
can be found on page 12. NOTE: Only 24” models have upper and lower brackets.
2. Open cabinet doors. Lift range hood
and slide it through the opening located
in the bottom of the cabinet. Make sure
opening matches the dimensions from
FIG. B.
3. There are spring clips located on the
left and right sides of the hood body
which will temporarily hold the hood in
place. If installing a 30” or 36” model,
skip to step 8. If installing a 24” model,
continue.
4. 24” Models Only. Secure upper brackets
to left and right sides of hood body by
using (2) 3/16 x 3/8” screws for each
bracket. Make sure the (2) captive nut
screws holes on the bracket are facing
downward.
5. 24” Models Only. Place lower installation
brackets under upper installation
brackets located on left and right sides
of hood body. The wider portion of the
lower installation bracket should be at
the bottom.

17
Pisa Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Installation Instructions
Mounting the Hood
6. 24” Models Only. From inside the hood,
secure (1) M4x8 screw into each lower
installation bracket. The position of this
screw is adjustable to accommodate
various cabinet bottom thicknesses.
7. 24” Models Only. Install (2) 3/16x40
screws into the captive nuts of each
upper installation bracket. Tighten
screws to adjust the height of the range
hood until there is no gap between the
cabinet and front edge of the hood.
8. 30” & 36” Models Only. Secure hood
body to cabinet base by (4) M4 x 16mm
screws through the bottom of range
hood.
A
9. Secure (2) 1” wood screws (A) into the
screw holes on the left and right sides of
the filter opening.

18 Pisa Use, Care, and Installation Guide
PISA
UNDERCABINET
CORE
Installation Instructions
Mounting the Hood
10. Place 6” round ducting over blower
collar and secure with aluminum
duct tape. If using hood in ductless
recirculating mode, refer to the Ductless
Recirculation section. Install electrical
wiring. Make sure no packing material
is inside hood. Power up hood check
for leaks around duct tape and verify all
functions.
11. Measure distance between back of
range hood and wall (if any) and cut
filler panel to the appropriate depth
using a utility knife or heavy-duty
scissors.
12. Install filler panel to bottom of hood by
(4) 3.5x10 screws for 24” model or (5)
3.5x10 screws for 30” and 36” model.

19
Pisa Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Installation Instructions
Ductless Recirculation
Ductless recirculation is intended for applications where an exhaust duct work is not possible to be
installed. When converted, the hood functions as a recirculating hood rather than an exhaust hood.
Fumes and exhaust from cooking are drawn and filtered by a set of optional charcoal filters. The air is
then purified and re-circulated back within the home.
We recommend to ALWAYS exhaust air outside of the home by employing existing or installing new
duct work, if possible. The hood is most eective and ecient as an exhaust hood. Only when the
exhaust option is not possible should you recourse to converting the hood into a recirculating hood.
When converted to be a recirculating hood, a set of charcoal filters are required on top of its standard
Metal Filter set. Order according to its part number below. The standard mesh filters are intended to
capture residue from cooking, and the optional charcoal filters help to purify fumes exhausted from
cooking for recirculation.
Recirculating Kit Installation (required if no ducting is used)
Kit includes the charcoal filters, brackets, and return air vent. For detailed installation instructions,
please refer to the manual included with the recirculating kit.
Hood Model Part Number Quantity to
Order
ZPI ZRC-00PI 1
1. Purchase recirculating kit per the part number
above.
2. Remove aluminum mesh filter from hood and
place charcoal filter on top of the filter. Secure
charcoal filter by 4 C clips from ZRC-00PI, 2
C clips for each elongated side of the charcoal
filter, FIG. D.
3. Reinstall aluminum mesh filter.
FIG. D

20 Pisa Use, Care, and Installation Guide
PISA
UNDERCABINET
CORE
Installation Instructions
FIG. E
4. In order to recirculate the air properly, a return
air vent must be installed to allow recycled air
to be returned to the kitchen. FIG. E. Ducting
must be run from the blower to the return air
vent. The return air vent can be positioned on
top of the cabinet or in a sot/ceiling.
5. The charcoal filter must be replaced after
every 120 hours of use or approximately 3 to
4 months based on the average daily use of 1
hour of cooking time.
Charcoal Filter Replacements
Hood Model Part Number Quantity to
Order
ZPI Z0F-C0PI 1
DO NOT WASH CHARCOAL FILTERS. Charcoal
filters may need to be changed more often
depending on cooking habits.