Zero Vu+zero Quick start guide

What's included ?
HDMI
Cable
RCU
RCU Batteries
* The contents in this guide are subject to change without prior notice.
Power
Adapter
Easy Setup Guide
External IR
Cable
English
DOWNLOAD ONLY

What's included ?
HDMI
Cable
RCU
RCU Batteries
* The contents in this guide are subject to change without prior notice.
Power
Adapter
Easy Setup Guide
External IR
Cable
1
English
DOWNLOAD ONLY

Front Panel
IR Receiver
Status LED
Smartcard reader slot
2
Rear Panel
A/V Jack External IR Sensor
or RS232
Ethernet
On/O Switch
LNB IN
USB 2.0
HDMI
Connects to TV using a HDMI cable
for both audio and video signals.
DOWNLOAD ONLY

Front Panel
IR Receiver
Status LED
Smartcard reader slot
Rear Panel
A/V Jack External IR Sensor
or RS232
Ethernet
On/O Switch
LNB IN
USB 2.0
HDMI
Connects to TV using a HDMI cable
for both audio and video signals.
3
DOWNLOAD ONLY

Remote Control
TV Power
Navigation Keys
Navigates up/down and left/right
on the menu options.
Up/down keys are used to call up
the channel list.
Teletext
Displays the teletext information of
the current channel if the channel
provides subtitles.
Subtitle
Displays the subtitle of
the current channel
if the channel provides subtitle.
AV
This button is used
when selecting video source of TV.
EPG
Displays the Electronic Program
Guide (EPG) information
if provided. CHANNEL+/-
Color Keys
• Red – mainly used for REC,
Cancel, etc.
• Green – mainly used for OK
• Yellow
• Blue
Volume+/-
EXIT
Numeric Keys
Mute
STB Power
Vu+ QWERTY is also supported.
(optional)
NOTE
4
Connecting Cable
1. Connect a Satellite signal cable
to the tuner input.
2. Connect ZERO to the TV
One HDMI cable is included in the accessory box. Connect one end of the cable to the HDMI input
of TV. Connect the other end to the HDMI output of ZERO.
DOWNLOAD ONLY

Remote Control
TV Power
Navigation Keys
Navigates up/down and left/right
on the menu options.
Up/down keys are used to call up
the channel list.
Teletext
Displays the teletext information of
the current channel if the channel
provides subtitles.
Subtitle
Displays the subtitle of
the current channel
if the channel provides subtitle.
AV
This button is used
when selecting video source of TV.
EPG
Displays the Electronic Program
Guide (EPG) information
if provided. CHANNEL+/-
Color Keys
• Red – mainly used for REC,
Cancel, etc.
• Green – mainly used for OK
• Yellow
• Blue
Volume+/-
EXIT
Numeric Keys
Mute
STB Power
Vu+ QWERTY is also supported.
(optional)
NOTE
Connecting Cable
1. Connect a Satellite signal cable
to the tuner input.
2. Connect ZERO to the TV
One HDMI cable is included in the accessory box. Connect one end of the cable to the HDMI input
of TV. Connect the other end to the HDMI output of ZERO.
5
DOWNLOAD ONLY

Connecting Cable
3. Power Up
A power cord and an adapter are provided in the accessory box.
Plug the round end of the adapter power cord into the power input of ZERO
AC input condition
• Nominal Voltage Range: 100 – 240 VAC
• Maximum Voltage Range: 90 – 264 VAC
• Nominal Frequency: 50 / 60 Hz
• Maximum Frequency Range: 47 – 63 Hz
NOTE
6
Run First Time Installation
Step 1. Language Selection
Step 2. Conguring Satellite Connection
Welcome.
This start wizard will guide you through the basic setup of your STB.
Press the OK button on your remote control to move to the next step.
English
German
Catalan
Croatian
Please use the UP and DOWN keys to select your language.
Afterwards press the OK button.
DOWNLOAD ONLY

Connecting Cable
3. Power Up
A power cord and an adapter are provided in the accessory box.
Plug the round end of the adapter power cord into the power input of ZERO
AC input condition
• Nominal Voltage Range: 100 – 240 VAC
• Maximum Voltage Range: 90 – 264 VAC
• Nominal Frequency: 50 / 60 Hz
• Maximum Frequency Range: 47 – 63 Hz
NOTE
Run First Time Installation
Step 1. Language Selection
Step 2. Conguring Satellite Connection
Welcome.
This start wizard will guide you through the basic setup of your STB.
Press the OK button on your remote control to move to the next step.
English
German
Catalan
Croatian
Please use the UP and DOWN keys to select your language.
Afterwards press the OK button.
7
DOWNLOAD ONLY

Run First Time Installation
Using LEFT/RIGHT key, you can choose one of the following Configuration Modes:
• Nothing connected
• Simple
• Advanced: for an advanced user configuration.
Use the up/down keys on your remote control to select an
option. After that, press OK.
Use wizard to set up basic features
Exit wizard
Use the left and right buttons to change an option.
Configuration Mode not configured
8
Run First Time Installation
If you choose Simple configuration mode, the following picture will appear.
The five modes are available for the satellite cable connection between LNB and your Vu+ as below :
• Single
This option is used to receive a single satellite with a single LNB.The cable from LNB is directly
connected to Vu+.
For the other modes, please refer to the user manual of ZERO.
Use the left and right buttons to change an option.
Please set up tuner A.
Mode
Satellite
Send DiSEqC
Configuration Mode
Single
Astra(19.2E)
no
Simple
DOWNLOAD ONLY

Run First Time Installation
Using LEFT/RIGHT key, you can choose one of the following Configuration Modes:
• Nothing connected
• Simple
• Advanced: for an advanced user configuration.
Use the up/down keys on your remote control to select an
option. After that, press OK.
Use wizard to set up basic features
Exit wizard
Use the left and right buttons to change an option.
Configuration Mode not configured
Run First Time Installation
If you choose Simple configuration mode, the following picture will appear.
The five modes are available for the satellite cable connection between LNB and your Vu+ as below :
• Single
This option is used to receive a single satellite with a single LNB.The cable from LNB is directly
connected to Vu+.
For the other modes, please refer to the user manual of ZERO.
Use the left and right buttons to change an option.
Please set up tuner A.
Mode
Satellite
Send DiSEqC
Configuration Mode
Single
Astra(19.2E)
no
Simple
9
DOWNLOAD ONLY

Step 3. Install Default Service List
Here you will be asked whether you want to install the default satellite lists. Press OK and
the following image appears:
Run First Time Installation
Do you want to install default sat lists ?
Yes
No
Please choose the default services lists you want to install.
Astra(19.2E)
Hotbird(13.0E)
no
no
Step 4. Channel Scan
Run First Time Installation
• Selecting Scan Mode - Automatic Scan / Manual Scan
Channel scanning is possible either in Automatic Scan mode or Manual Scan mode.
Do you want to do a service scan?
Yes, do a manual scan now
No, scan later manually
Yes, do an automatic scan now
Press OK to initiate the channel scan.
• Channel Scanning
The scanned channels will be displayed if the previous configurations have been done correctly.
scan done! 2 services found!
ANIXE HD
ASTRA HD+
Service Scan
10
DOWNLOAD ONLY

Step 3. Install Default Service List
Here you will be asked whether you want to install the default satellite lists. Press OK and
the following image appears:
Run First Time Installation
Do you want to install default sat lists ?
Yes
No
Please choose the default services lists you want to install.
Astra(19.2E)
Hotbird(13.0E)
no
no
Step 4. Channel Scan
Run First Time Installation
• Selecting Scan Mode - Automatic Scan / Manual Scan
Channel scanning is possible either in Automatic Scan mode or Manual Scan mode.
Do you want to do a service scan?
Yes, do a manual scan now
No, scan later manually
Yes, do an automatic scan now
Press OK to initiate the channel scan.
• Channel Scanning
The scanned channels will be displayed if the previous configurations have been done correctly.
scan done! 2 services found!
ANIXE HD
ASTRA HD+
Service Scan
11
DOWNLOAD ONLY

Step 5. Parental Control Option
Here you can choose whether to enable the parental control option. If you press OK,
you will be asked to enter PIN number
Enable parental control
Protect setup
Protect services
yes
no
no
Parental control setup
New PIN
Reenter new PIN
****
****
Change pin code
12
For more information about ZERO
1. Go to "Plugins" from Main Menu
2. Click "Opera Web Browser"
3. Go to "Tools" - "Bookmark"
4. Click "User Manual"
Easy way to consult the manual: By long pressing 'Help' button, you can also access
to On-Screen Manual page.
DOWNLOAD ONLY

Step 5. Parental Control Option
Here you can choose whether to enable the parental control option. If you press OK,
you will be asked to enter PIN number
Enable parental control
Protect setup
Protect services
yes
no
no
Parental control setup
New PIN
Reenter new PIN
****
****
Change pin code
13
For more information about ZERO
1. Go to "Plugins" from Main Menu
2. Click "Opera Web Browser"
3. Go to "Tools" - "Bookmark"
4. Click "User Manual"
Easy way to consult the manual: By long pressing 'Help' button, you can also access
to On-Screen Manual page.
DOWNLOAD ONLY

14
A Guide to Request of GPLv2 based Software
This product contains software whose rights holders license it on the terms of the GNU General
Public License, version 2 (GPLv2). You can find the text of this license in its English original version
in the manual for this product. We will provide you with the complete corresponding source code
of the software licensed under the GPLv2.
if you send us a written request by email to the following addresses:
Vu+ Support Team, [email protected]
detailing the name of the product and indicating how we can contact you.
Please note that we will ask you to pay us a certain amount of money for the costs incurred.
The amount can be varied according to your location and Vu+ Support Team will notify the exact
cost when receiving the request.
This offer is valid for three years from the moment we distributed the product.
In addition, you can access the source code for our devices using the command below.
git clone http://archive.vuplus.com/git/dvbapp.git
Copyright© 2014 All Rights Reserved by Ceru., Ltd.
DOWNLOAD ONLY

A Guide to Request of GPLv2 based Software
This product contains software whose rights holders license it on the terms of the GNU General
Public License, version 2 (GPLv2). You can find the text of this license in its English original version
in the manual for this product. We will provide you with the complete corresponding source code
of the software licensed under the GPLv2.
if you send us a written request by email to the following addresses:
Vu+ Support Team, [email protected]
detailing the name of the product and indicating how we can contact you.
Please note that we will ask you to pay us a certain amount of money for the costs incurred.
The amount can be varied according to your location and Vu+ Support Team will notify the exact
cost when receiving the request.
This offer is valid for three years from the moment we distributed the product.
In addition, you can access the source code for our devices using the command below.
git clone http://archive.vuplus.com/git/dvbapp.git
Copyright© 2014 All Rights Reserved by Ceru., Ltd.
DOWNLOAD ONLY