3. Pick up the desoldering gun.
5. Caution！
5.1 The power cord only can be inserted in approved power sockets or adapters.
5.2 High Temperature
The temperature of the soldering tip will reach as high as around 400℃（ 752℉）when the
power switch is on. Since mishandling may lead to burns and fire, be sure to comply with the
following precautions:
Do not touch metallic parts near the soldering tip/ nozzle.
Do not use this system near the flammable items.
Advise other people in the work area that the unit can reach a very high temperature and
should be considered potentially dangerous.
Turn off the power switch while taking breaks and when finishing using.
Before replacing parts or storing the system, turn off the power and let it cool down to the
room temperature.
5.3 take care of your tools
Do not use the tools for any applications other than soldering or desoldering.
Do not rap the iron against the work bench or otherwise subject the iron to severe
shocks.
Do not file the soldering tip to remove the oxide, please wipe the tip on the cleaning
sponge.
Use only accessories or attachments which are listed in the operation manual. Use of
other tools and other accessories can lead to a danger of injury.
Please turn off the power before connecting or disconnecting the soldering iron.
5.4 Maintenance
Before further use, safety devices or slightly damaged parts must be carefully checked for
error-free and intended operation. Inspect moving parts for error-free operation and that they
don’t bind, or whether any parts are damaged. Damaged safety devices and parts must be
repaired or replaced by a qualified technician, so long as nothing else is indicated in the
operation manual. Use only accessories or attachments which are listed in the operation
manual. Use of other tools and other accessories can lead to a danger of injury.
5.5 Keep children at a distance
Do not allow other persons to touch or disturb the soldering tool or power cord. Keep
other persons away from the work area. Unused soldering tools should be stored in a dry
location which is out of the reach of children. Switch off all unused soldering tools.
5.6 Protect yourself against electrical shocks
Avoid touching grounded parts with your body, e.g. pipes, heating radiators and so on.
The grip of antistatic designed soldering tool is conductive.
5.7 Work environment
Do not use the soldering tool in a moist or wet environment. The soldering iron should be
