Zimmer Soleoline Soleo Sono User manual

Operating Instructions
Soleoline
Soleo Sono
GB

Soleo Sono
Front view of device
Fig. 1
Selection and control elements
1 Intensity regulator 4 Screen
2 Frequency ratio regulator 5 Touch pen in holder
3 Slot for ultrasound head 6 SD card slot
Fig. 2
Screen readouts
Status bar 9 Title bar
8 Navigation bar 10 Buttons on the screen
1 2
3
4
5
3
6
9
8
10

Fig. 3
Soleo Sono
Rear view of device
Switch and connector sockets
11 Connector for mains cable 13 On/off switch
12 Fuse holder for mains fuse 14 Socket for 0.8/2.4 MHz ultrasound head
Note: Sockets (15*), (16*) and (17*) have no function on Soleo Sono.
11
12
(15*) (16*)
14 (1 *)
13

Contents
Soleo Sono
Front view of device
Selection and control elements/screen readouts
Rear view of device
Switch and connector sockets
Page
1. Soleoline – Summary / Soleo Sono 1
2. Fitting the ca les, Starting the system 2
3. Configuration
3.1 General 3
3.2 Ultrasound therapy 9
3.3 Attendance/Maintenance 10
4. Quick operating instructions 11
4.1 Water bath treatment 15
5. General instructions – SD card 1
6. Description of the selection uttons 18
7. Screenshot of the therapy screen 22
8. Description of the screen elements and the uttons
8.1 Screen elements 23
8.2 Buttons 26
9. Indications menu 29
10. Saving a modified programme 32
10.1 Favourites 34
10.2 Memory 35
11. Retrieving and editing favourites and memory
11.1 Retrieving favourites 36
11.2 Editing favourites 3
11.3 Retrieving and editing memory 39

Contents
Page
12. Indications 40
13. Contraindications 41
14. Explanation of sym ols 42
15. Warnings 43
16. Technical Information
16.1 General 44
16.2 Specific 45
17. Cleaning, Disinfection 46
18. CE Marking 4
19. Contents on delivery, accessories 48
20. Safety and maintenance 49
21. Functional test 50
22. Error messages, Trou leshooting, Disposal 51
23. Manufacturer's EMC declaration 52
Valid for the Soleo Sono device.
These Operating Instructions are an integral part of the device.
They must be stored with the device and kept accessible at all times for anyone authorised to operate this
device.
These Operating Instructions are valid from 01.01.10.

1
Soleoline – Summary
Soleo Sono
1
What is Soleoline? An ultramodern and innovative range of products with 3 different devices
available.
Soleo Sono
An ultramodern and innovative ultrasound therapy device.
Soleo SonoStim
An ultramodern and innovative combination device for electrotherapy and
ultrasound therapy with the option of attaching a vacuum unit.
Soleo Galva
An ultramodern and innovative electrotherapy device with the option of
attaching a vacuum unit.
Note: The operation of Soleo SonoStim and Soleo Galva is described in a separate
set of operating instructions.
What are the
advantages of
Soleoline?
A clear contemporary colour screen showing all parameters necessary for
therapy as well as modern touch control.
Individual programme start configuration and clear, simple menu navigation
make operation of the device easy and comfortable for users.
The compact design saves room in the practice and is highly suited for use in
house visits.
What does the Soleo
Sono do?
Delivers therapeutic ultrasound via a modern variable frequency ultrasound
head.
Innovations in Soleo
Sono?
SonoSwing, the innovation in the field of ultrasound therapy:
• a single ultrasound head with two frequencies 0.8 MHz and 2.4 MHz
• freely selectable penetration depths using percentage adjustment of the
frequency ratios.
Note: The device should only be used by medical specialists (e.g., doctors,
therapists and health paraprofessionals).

2
Fitting the ca les
Starting the system
2
Note: On the connector cable for the ultrasound head there is a green arrow as a
guide for correct connection with the device.
Connecting the
ultrasound head
When connecting the ultrasound head, ensure that the green arrow is pointing
left when being plugged in.
Connect the ultrasound head to the appropriate socket (14).
Connecting the
mains ca le
Plug the mains cable into the appropriate socket (11) on the device and then
plug into the mains socket.
Switching on the
device
Switch on the device using the rocker switch (13).
Note: All buttons, menus and submenus are activated directly on the screen by
touching it or using the touch pen.

3
Configuration
3.1 General
3
Note: hanges to the default settings can only be made from the start screen.
Start screen After switching on the device and the self-test, the start screen opens.
Selecting
configuration
Press the button to open the configuration menu.

4
Configuration
3.1 General
3
Configuration menu In the configuration menu the factory settings can be changed and individually
set.
After activation of the configuration menu the ‘Choice of Configuration’ screen
is active.
Saving settings
Press the / button to save the new
settings.
Closing the
configuration menu
Press the button to return to the start screen.
General settings
The setting options are outlined below.
In the factory, the default settings are pre-programmed as shown on the
screen.
Language
Press the arrow key to open the
drop-down menu to select the language.
The language is selected by pressing on the appropriate row.