ZKTeco ZKX5030 User manual

1
INSTALLATION GUIDE
X-ray Inspection System ZKX5030
Version: V1.2 Date: 2018.02

1
1. Component disassembly
1. Open the side plate with the triangle key. Note that there are two positioning posts under the
side panel. When removing the side panel, first lift the side panel and then remove it.
2. Use a wrench to remove the four xed internal hexagon bolts counterclockwise.
3. Use a wrench to turn the four support feet under the device clockwise to disengage the
devicefromthe wood and then pull out the two support bars under the device. Use the
wrench againto turn the four foot cups underthe device counterclockwise until the wheels
can move.
4. Move the equipment to the place of use, and cover the side covers on both sides. When
closing, pay attention to the positioning of the positioning posts on the bottom and the holes
in the side plates. Finally, twist the foot cup clockwise to ensure that the equipment is xed
well and locks the foot nut.
Positioning
column
Fixing holes and
bolts
②
③
①
S
upport wood
④

2
2. shelf connection
1. Using 8 M6*16 inner six angle screw with the elastic gasket, connect the two H frame with the
beam together.
2. Using 16 M6*16 inner six angle screw with the elastic gasket, connect H frame with the
receiving tray together.
3. Put the roller on the fixed seat.
4. Using 4 M6*8 countersunk head screws，connect graft connecting piece with machine
frame.
5. Using 4 M6*8 with countersunk head screw ,connect device with receiving shelf.
③
④
① ②
⑤

3
3. wiring
1. Take the monitor fromthe package and install the screen and base.
2. Take the wireless keyboard and mouse and their USB receiver from it’s package and install
battery.
3. Connect the VGA cable and monitor power cable on the top plate to the monitor.The
receiver can be connected with any one of USB estension cable.
4. Insert the power cable into the external port of the device and plug the other end into the
electric supply.
①
Receiver
USB
Power cable
VGA cable
Connect the electric
supply cable triangle plug

4
4. Boot
1. After checking the line, you can directly use the key to turn the switch to "ON", then press the
start button and wait for the device to start.
2. The initial login is automatically logged in as administrator by default. The default admin
account and password are: user name: 9999, password: 123456. Please change the password
as soon as possible afte
3.
5. Check the
1.
2. Aft
Place the package on the belt at the entrance and use the mouse to click on the arrow keys to
control motor.
er the parcel is conveyed to the goods shelves by the belt, the image appears on the
screen in real time, and the selected image processing function can be d in the image.
3. Use the mouse to click on the " " button in the control key. After the motor stops
running, remove the package from the shelves.
②
①
②
①
Place parcels, motor control keys

5
6. Power o
1.
2. The
When turned o, you need to turn the key switch from "ON" to "OFF". Note that do not unplug
the power cable until the machine is shut down completely.
device shows "Shutdown" and then prompts "Windows will shut down within oneminute."
When the green work indicator goes out, the device is completely turned o.
3. After the equipment is completely turned o, the mains electricity can be disconnected.
Pleaseremove the key on the key switch and keep it properly.
ZK Building, Wuhe Road, Gangtou, Bantian, Buji Town, Longgang District,
Shenzhen China 518129
Tel: [phone]
Fax: [phone]
www.zkteco.com
© Copyright 2014. ZKTeco Inc. ZKTeco Logo is a registered trademark of ZKTeco or a related company. All other product
and company names mentioned are used for.
②
①
③