ZKTeco TDM95 User manual
Quick Start Guide
TDM95
Version: 1.0
Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between
the actual product and the written information in this manual.
1 Overview
1
2 Instructions
ŸWhen a person places his/her wrist or palm in front of the
device within the specified measuring distance the
temperature and distance measurement program is
triggered and the output is displayed.
ŸWhen the temperature measured is within the normal
value range i.e., below 37.3°C, the green LED light glows
for a second and the buzzer beeps once.
The temperature data is corrected by the blackbody before
delivery and is compensated to the temperature data of the
wrist temperature range (It is the temperature displayed on
the digital display, also with the measuring distance).
It is recommended to measure the temperature of the wrist.
Operating instructions:
1.
2.
3.
This product is a non-contact electronic module that measures
the temperature of the human body. It returns the body
temperature of a person by measuring the heat radiation of the
palm or wrist, placed in front of the device within a specified
measuring distance. The measured body temperature differs
sometimes when a person arrives from the extreme ambient
temperature. Thus, it is recommended to wait for a while before
measuring body temperature for a precise result.
2
3 Features
Data
Synchronization
Accurate
Measurement
LED
Display
Dual
Temperature
Mode
Measured
within a
second
Outdoor use:
The product can be used in direct sunlight.
ŸWhen the measured temperature crosses 37.3°C, the red
LED light glows for a longer time, and the buzzer also
beeps thrice. If the next temperature measurement is
triggered when the buzzer is already alarming, the current
high-temperature alarm is interrupted.
Measuring Range : 32.0°C to 42.9°C
Measuring Accuracy : ±0.3°C
Measuring Distance : 1cm to 15cm.
Communication:
RS232 / RS485 / USB Communication
Non-contact measurement:
1cm to 15cm distance measurement.
3. Service Life
3
4 Technical Parameters
1. Basic Parameters
2. Measuring Range
Accuracy
0.1°C (0.1°F)
Storage Temperature
-20°C to 55°C
Operating Ambient Temperature
15°C to 38°C
Relative Humidity
10% to 85%
Atmospheric Pressure
70kpa to 106kpa
Power
DC 5V
Dimensions
114.98×89.97×32.2 (mm)
Weight
333g
Temperature Measurement Range
32.0°C to 42.9°C
Temperature Detection Range
1cm to 15 cm
The product’s service life is more than 3 years.
4. Storage and Transportation Environment
1) Store in a well-ventilated room without corrosive
environment.
2) Prevent drop or harsh jerk, vibration, rain and snow splash
during transportation.
5 Product Appearance
Communication
Indicator
Status Indicator
Temperature Probe
Distance Sensor
4
Temperature
Detection
Distance
6 LED Display
Temperature
Indicator
Signal Sound
32.0C to 37.3C
Green
1 Single Beep
37.4C to 43C
Red
Beep 3 times + Red LED
5
1.
2.
7Wiring Connection
User Menu: Switch between Celsius (°C ) & Fahrenheit (°F).
Method: Long press “+” button to switch the display unit.
Long press E to save and exit.
The p ower s upp l y vo l tag e of T DM9 5 is 5 V, th e
communication baud rate is 9600 bits per second, and it
supports three communication modes which are as -
Rear View
a. USB Communication: Please use a standard micro USB
data cable.
8 What’s in the box?
6
RS232 Communication: Use a customized USB cable for
power supply and connect it to the RS232 port. Then,
connect the blue wire to the RXD.
RS485 Communication: Use a customized USB cable for
power supply and connect it to the RS485 port. Then,
connect the blue wire to 485+, and connect the brown
wire to 485-.
RS485-
RS485+
TXD
RXD
Item Name
Quantity
TDM95
1
Quick Start Guide
1
Micro USB cable
1
RS232/RS485 USB cable
1
b.
c.
ZKTeco Biometric India Pvt. Ltd. Global R&D Centre
Survey No 01/01, Outer Ring Road, Mahadevpura,
Bengaluru, Karnataka – 560048
Copyright © 2020 ZKTECO CO., LTD. All Rights Reserved.
Phone: 080-68281342/48 | Email: [email protected] | Website: www.zkteco.in
Table of contents
