Zokop ALW-J02 User manual
Cleaning
Do not immerse the motor base, cord or mains plug in water or any other liquid.
The stainless steel sieve and feed chute contain sharp parts. Do not touch these
parts when handling or cleaning.
!
• For easy cleaning - immediately after each use rinse removable
parts under running water (to remove wet pulp). Allow parts to air dry.
• After disassembling the unit all removable parts may be washed in
hot soapy water.
• The juicer cover, bowl, large pulp container, stainless steel sieve and
juice jug are dishwasher safe. Only use the top shelf of your dishwasher
• Wipe the motor base with a damp cloth. Do not immerse the motor base
in any liquid.
• Before washing the juice jug, remove the froth separator by lifting it up
and out of the jug. Rinse the jug and separator under running water
• Discolouration of the plastic may occur with strongly coloured fruit and
vegetables. To help prevent this, wash parts immediately after use
• If discolouration does occur, the plastic parts can be soaked in 10% lemon
juice and water or they can be cleaned with a non abrasive cleaner.
To fully benefit from the item we offer, please read this manual
carefully before using and keep for future reference.
Thanks for your purchase. Any questions please don't hesitate to contact us
, We will handle all your problem ASAP. Your feedback is vital to us! And
we will always try to do better. For more details, please contact us by email
email, so that we can find your order and better assist your issue) Or call us
at (1)855-882-2333 .
Instruction Manual
Important Tips
This appliance can be used by children aged from 8 years and above
and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use
of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
Check the sieve for damage every time you use the appliance.
Do not use the appliance if the rotating sieve is damaged.
Always disconnect the appliance from the mains supply socket if
it is left unattended and before assembling, disassembling
or cleaning.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Never use this appliance for anything other than its intended use.
This appliance is for household use only. Do not use this appliance outdoors.
Always ensure that hands are dry before handling the plug or switching on the
appliance.
Always use the appliance on a stable, secure, dry and level surface.
This appliance must not be placed on or near any potentially hot surfaces (such as
a gas or electric hob).
Never immerse any part of the appliance or power cord and plug in water or
any other liquid.
Never let the power cord hang over the edge of a work top, touch hot surfaces or
become knotted, trapped or pinched.
Do not use the appliance if it has been dropped, if there are any
visible signs of damage or if it is leaking.
Never use any accessory or attachment not recommended
by the manufacturer.
Switch off the appliance before changing accessories or
approaching parts which move during use.
Allow moving parts to come to a stop before opening or cleaning.
Never insert your fingers, utensils or any other object into
the feeding tube. Always use the food pusher.
Never attempt to remove or replace any part of the appliance
whilst it is in operation.
!
!
!
!
!
!
!
Ensure that the appliance is switched off and unplugged from the supply socket
if it is left unattended and before assembling, disassembling or cleaning.
Never immerse any part of the appliance or power cord and plug in water or any
other liquid.
Never use harsh, abrasive or caustic cleaners to clean this appliance.
56
1.Food pusher
For safely pushing whole fruit and vegetables into the professional
juicer’s feed chute. Dishwasher safe.
2.Juicer cover
Dishwasher safe, durable, clear cover.
3.Stainless steel, micro mesh sieve
Dishwasher safe.
4.Bowl
Dishwasher safe.
5.Juice outlet
Up and down adjustable.
6.Motor base
Problem Solution
The appliance
does not work.
The appliance is equipped with a safety system. If the
partshave not been assembled properly, the
appliance does notwork. Switch off the appliance and
check if the parts have
been assembled in the right way.
The appliance
slows down during
use.
The integrated pulp container has reached its
maximum capacity. Switch off the appliance and
remove the pulp from the integrated pulp container.
The appliance
makes a lot of
noise, gives off an
unpleasant smell, is
too hot to touch,
gives off smoke
etc.
It is very common for a new appliance to give off an
unpleasant smell or emit some smoke the first few
times you use it. This will stop after you have used the
appliancea number of times. The appliance may also
give off an unpleasant smell or emit some smoke if
you process too many ingredients, if you process very
hard ingredients (e.g.leeks) or if you let the appliance
operate too long. In these cases, switch off the
appliance and let it cool down for 60
minutes.
The filter touches
the feeding
tube or vibrates
strongly during
processing.
Switch off the appliance and unplug it. Check if the
filter is placed properly in the juice collector. The ribs
in the bottom of the filter have to fit properly onto the
driving shaft. Che if the filter is damaged. Cracks,
crazes, a loose grating disc or any other irregularity
may cause malfunction.
The filter is
blocked
Switch off the appliance, clean the feeding tube and
the filter and process a smaller quantity.
Product Features
1
2
3
4
5
6
7
9
10
8
Problem and Solution
1
4
High performance,Powerful motor base
Be careful when handling the stainless steel sieve. Do not touch the small sharp
blades inside the sieve.
Place the motor base on a flat, dry surface such as your kitchen worktop. Ensure that the
3-position switch is in the off (0) position, then switch the appliance off at the power outle
and unplug the cord.
1. Fit the bowl onto the motor base. The spout on the filter bowl should be on the same
side of the motor base as the safety locking arm
2. Gently push the sieve down onto the motor base drive coupling until it clicks into
place. Make sure that the sieve is fitted securely inside the bowl and onto the drive
coupling.
3. Place the juicer cover over the bowl. The feed chute should be positioned over the
stainless steel sieve
4. Pivot the safety locking arm upwards until it engages with the two grooves in the
juicer cover. The safety locking arm should now be vertical and locked into place on
the top of your juicer. If the arm doesn’t fit into place easily, don’t force it. Check that
you have fitted the juicer cover correctly.
5. Tilt the large pulp container slightly and place it underneath the pulp outlet side of the
juicer cover.
6. Fit the lid onto the juice jug. Position the juice jug over the juice outlet spout on the
right hand side of your juicer.
7. Slide the food pusher into the feed chute. The food pusher has a groove in it which
must be lined up with the protrusion inside the feed tube.
Specification
ALW-J02
Principle
How to USE
4
▲▲
▲
2
3
1
5
▲
↓
↓
↓
↓
↓
6
▲
↓
AC120V~60Hz 600W
ＬＥＤ
P
０
１）
２
120V~60Hz ×M
~
!
23
