Measure Set Calc Store Report Archive
Basic Measurements (Meas Button)
Depth (cm)
1. During live 2D scanning, press Measure.
2. Position caliper with Trackball.
3. Depth will display on screen.
Distance (cm)
1. Press Measure while 2D or M-Mode image is frozen.
2. Select Distance on menu & press Set.
3. Position first caliper with Trackball & press Set.
4. Position second caliper with Trackball & press Set.
5. Distance between calipers will display on screen.
Basic Calculations (Calc Button)
1. Press Calc while image is frozen.
2. Select desired calc on menu & press Set.
3. Position caliper with Trackball & press Set.
4. Position additional caliper(s) with Trackball & press Set. Calc
will display on screen.
5. Press Enter or Store to store the result.
6. Press Report to display calcs you’ve recorded.
Export Exams to USB or CD/DVD
1. Press Archive (QWERTY keyboard).
2. Point to Export. This will open Archive Exam Export.
3. Point to Destination. Then click Export at bottom of screen.
4. On next screen, click Options. Archive Exam Export
Options screen displays:
5. Select Non-DICOM. Select JPEG or TIFF.
6. Click Apply.
7. Click Export on next screen. Verify export (Yes/No) at
prompt.
8. If Yes, exam exports to USB/CD/DVD but is not deleted from hard
drive.
For use with z.onepro Ultrasound Systems. For further information, see the z.onepro
Ultrasound Systems IFU (p/n Q00350-00).
For information and pricing on ZONARE system upgrades, transducers, accessories, and
new features, please call 1-877-966-2731.
Part Number K90141-00 Rev A
©2014 ZONARE Medical Systems Inc.
All rights reserved. Printed in the USA.
