Zoomax DESIRE HD User manual

ZOOMAX®DESIRE HD
Desktop Magnifier
User’s Guide
Revision 0.9
ZOOMAX Technology, Inc. May 2012

ZOOMAX Technology, Inc., 3rd Floor, No.9 Building, F Area, 188#
Xinjun Circle Road, Pujiang High Technology District, Shanghai,
China. 200120
Copyright ©2012 ZOOMAX Technology, Inc., All Rights Reserved.
ZOOMAX®is a trademark of ZOOMAX Technology, Inc. in the
United States and other countries. Information in this document is
subject to change without notice. No part of this publication may be
reproduced or transmitted in any form or by any means electronic
or mechanical, for any purpose, without the express written
permission of ZOOMAX.
To contact by e-mail, send questions to [email protected]
To search the knowledge base, visit www.zoomax.co and choose
the relative link.

Table of Contents
How to setup DESIRE HD..........................................1
Steps to Use DESIRE HD......................................... 6
Advanced Operation................................................... 9
Focus Lock...............................................................9
Auto Zoom (AZ).................................................... 10
Find function..........................................................10
Electronic Curtain................................................. 11
Demo mode...........................................................11
Reset Factory Default Settings...........................12
Display Firmware Version Number.................... 12
Important Safety Instructions...................................13

1
How to setup DESIRE HD
Please follow the steps as below:
1.
Take
out
the
main
unit
by
rear
post.
Lift
and
transport
the DESIRE HD by the rear post to move it to a
sturdy surface such as a table, desk, or countertop.
Lock the XY table to stop it from moving by pushing
the brake lock toward the right ZOOMAX logo.
Note: Please do not lift by LED light/ camera (part
A).

2
2.
Follow
the
pictures
to
fix
the
monitor,
“
L
”
bracket,
rear
poster and camera box in sequence with one set
screw. It is adjustable with the rear bracket.
Component list
Step 1
Note: fix part A with rear post by screw, it is called Main
Unit.

3
Step 2
Note: follow the above steps to fix the monitor and “L”
bracket by screw.
Step 3
Note: follow the arrow direction to fix the monitor and
main unit by screw.

4
3.
DESIRE
HD
monitor
can
not
be
moved
up
or
down
directly, you can move the monitor by two ways:
adjusting the screw from back-up bracket on 4-lier or
shift between Part A and Part B. Please use the next
picture to loosen the screw, and put at your desired
location and then fix the screw.
Note: It is recommended to choose the appropriate height
chair to read DESIRE HD monitor easily.
DESIRE HD MONITOR ROTATE
The monitor can be tilted back and forth, left and right as
15 degree to offer your preferred view of vision.

5
4. Using the image and description on the page to identify
and connect DESIRE HD connectors (HDMI/DVI, DC
TFT/LCD POWER-IN, KB, DC-IN) with according cables.
Please follow the correct numerical to connect cables. No.
4 is for wall outlet power supply.
Note: Be sure to connect all the cables before plug-in
the DC power (input: 100-240V~1.2A, 50-60HZ; output:
19V 2.1A).

6
Steps to Use DESIRE HD
Use this image and the steps on pages through to turn on
and begin using the DESIRE HD.

7
Follow the arrow direction to press the red power button to
turn on, long press 3 seconds to turn off.
Note: If the monitor screen remains blank, make sure that
the monitor cable is connected well and monitor is turned
on.
1.
Unlock
the
XY
reading
table
to
move
a
document
so
that its text moves back and forth across the screen to
make reading easier.
2.
Turn
the
Green
Magnification
dial
to
adjust
magnification. The magnification range is from 2X to 70X.

8
Turn the yellow Brightness dial to adjust brightness. The
default value is 50, you can adjust your desired brightness
by turning this dial.
Turn the blue Color Select dial to choose a color mode
that best suits your vision needs. Default color modes are
full color; black on white; white on black; yellow on blue;
and yellow on black. Also you have 17 color options in
advanced color mode (true color, black on White, blue on
white, blue on yellow, black on yellow, black on purple, black on
light blue, black on orange, black on green, white on black, white
on blue, yellow on blue, yellow on black, purple on black, light
blue on black, orange on black, green on black)
3.
Long
press
blue
Color
Select
dial
until
the
Beep
sound,
then you are in advanced color mode.
Short press blue Color Select dial to go back to true color
mode whatever which color mode you were.

9
Advanced Operation
Focus Lock
By default, the camera automatically focuses on the
closest object in view. However, if you want focus to
remain on a specific object such as a document on the XY
table, you can turn on the Focus Lock feature. This
prevents the camera from accidentally focusing on your
hand or any other item that moves in front of the camera.
During normal operation, it is recommended that you leave
Focus Lock off. Please turn it on when writing or handwork.
To use Focus Lock, do the following:
1. Follow the arrow direction to press the button once
to turn on Focus Lock. The Focus Lock label will appear on
the screen.
2. Press it a second time to turn off Focus Lock and restore
automatic focus.

10
Auto Zoom (AZ)
Turn the Green Magnification dial to get your preferred
magnification, then press and hold the Green
Magnification dial to save this preferred magnification.
Whatever magnification view you are in, just press AZ
button, it will return to this magnification immediately. The
factory default is 5X magnification.
Find function
Follow the arrow direction to press and hold the FIND
button located in the centre of the yellow Brightness dial
to zoom out and see more of the document. A set of
crosshair will display on the monitor screen. Move the XY
table and use the crosshairs to center and view a new area
of the document.
Release the Find button to turn off the crosshairs and
zoom back in on the new area of the document.

11
Electronic Curtain
Follow the arrow direction to press the white =button to
shift between 6 electronic curtain modes; Long press =
button until the beep sound when you see =on the screen,
then turn the yellow brightness dial to adjust the distance
of your preferred area; Repeat long press =button until the
beep sound again, then turn the yellow brightness dial to
adjust your preferred location by remaining the fixed
distance.
Demo mode
In true color mode, long press =button for 10 seconds, you
will get into Demo mode, DESIRE HD will demonstrate
each function about itself automatically; Short press the
power button to exit from Demo mode.

12
Reset Factory Default Settings
Follow the arrow direction to press and hold the button
for 5 seconds to reset DESIRE HD to its default factory
settings. Release the button when the screen goes
black and after beep sound.
Display Firmware Version Number
Follow the arrow direction to press and hold the button
for 5 seconds to reset DESIRE HD to its default factory
settings. Release the button when the screen goes
black and after beep sounds. The Firmware Version
Number will be indicated on the lower right corner.

13
Important Safety Instructions
Read and follow all warning notices and instructions marked on the
product or included in the manual.
- Slots and openings in the product are provided for ventilation. To
ensure reliable operation of the product and to protect it from
overheating, these slots and openings must not be blocked or
covered.
- Do not allow anything to rest on the power cord, and do not locate
the product where persons will walk on the power cord.
- Do not attempt to service this product yourself, as opening or
removing covers may expose you to hazardous voltage or to other
risks. Refer all servicing to qualified service personnel.
- When installed, the product must comply with the applicable
Safety Standards and regulatory requirements of the country in
which it is installed. If necessary, consult with the appropriate
regulatory agencies and inspection authorities to ensure
compliance.
- Always operate the product in a place where the temperature is
between 10° and 35s° C (50° and 95° F).
- Keep it away from wet areas, rain, and other sources of liquids.
Do not submerge the product.
- Do not stare directly at the light emitted by the reading lamp as the
bright light may be harmful to the eyes.