Zotac ZBOX series User manual

ZOTAC ZBOX
1
ZOTAC ZBOX
User’s Manual
No part of this manual, including the products and software described in it, may
be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form or by any means, except documentation kept by the
purchaser for backup purposes, without the express written permission of ZOTAC.
Products and corporate names mentioned in this manual may not be registered
trademarks or copyrights of their respective companies, and are used for identication
purposes only. All trademarks are the property of their respective owners.
Every effort has been made to ensure that the contents of this manual are correct and
up to date. However, the manufacturer makes no guarantee regarding the accuracy of
its contents, and reserves the right to make changes without prior notice.
CAUTION:
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be
recycled where possible. Disposal of used batteries must be in accordance with local
environmental regulations.

ZOTAC ZBOX
2
Table of Contents
Product specications ------------------------------------------------------------------------------------------- 3
Safety information ------------------------------------------------------------------------------------------------- 4
Setting up your system---------------------------------------------------------------------------------------- 4
Care during use------------------------------------------------------------------------------------------------- 4
Welcome -------------------------------------------------------------------------------------------------------------- 5
Package contents ---------------------------------------------------------------------------------------------- 5
Getting to know your ZOTAC ZBOX ------------------------------------------------------------------------- 6
Front view -------------------------------------------------------------------------------------------------------- 6
Rear view--------------------------------------------------------------------------------------------------------- 7
BIOS settings of specic functions-------------------------------------------------------------------------- 8
How to disable the ring LED indicator--------------------------------------------------------------------- 8
How to disable the integrated IR receiver ---------------------------------------------------------------- 10
Installing hardware inside the ZOTAC ZBOX ------------------------------------------------------------- 12
Installing a memory module --------------------------------------------------------------------------------- 13
Removing a memory module-------------------------------------------------------------------------------- 14
Installing a hard disk drive ----------------------------------------------------------------------------------- 15
Installing an M.2 SSD ----------------------------------------------------------------------------------------- 17
Setting up your ZOTAC ZBOX --------------------------------------------------------------------------------- 19
Positioning your ZOTAC ZBOX-------------------------------------------------------------------------------- 21
Installing the stand --------------------------------------------------------------------------------------------- 21
Attaching your ZOTAC ZBOX to a monitor -------------------------------------------------------------- 22
Installing drivers and software -------------------------------------------------------------------------------- 23
Installing an operating system ------------------------------------------------------------------------------ 23
Installing system drivers -------------------------------------------------------------------------------------- 23
Using your ZOTAC ZBOX---------------------------------------------------------------------------------------- 24
Conguring a wireless connection ------------------------------------------------------------------------- 24
Conguring a wired connection ----------------------------------------------------------------------------- 25
Using a static IP -------------------------------------------------------------------------------------------- 25
Using a dynamic IP (PPPoE connection) ------------------------------------------------------------ 25
Conguring audio output ------------------------------------------------------------------------------------- 26
Installing Windows 7---------------------------------------------------------------------------------------------- 27
Intel Rapid Storage Technology------------------------------------------------------------------------------- 30
Introduction ------------------------------------------------------------------------------------------------------ 30
Setting up Intel Rapid Storage Technology -------------------------------------------------------------- 30

ZOTAC ZBOX
3
Product specications
q Chipset
v Intel H170 chipset
qMicroprocessor support
v Intel Core i7-6700T, quad core 2.8 GHz (8 M Cache, up to 3.6 GHz) for ZBOX-MI571 series
v Intel Core i5-6400T, quad core 2.2 GHz (6 M Cache, up to 2.8 GHz) for ZBOX-MI551 series
qOperating systems:
v Supports Windows 7 / 8.1 / 10 32/64-bit
qSystem Memory support
v Two DDR3L-1600/1333 SODIMM slots
v Up to 16 GB of memory
qUSB Ports
v One USB 3.1 Type-C port, one USB 3.1 port (from SD/USB 3.1 Combo)
v Two USB 3.0 ports, one USB 2.0 port
qOnboard Serial ATA
v SATA 6.0 Gb/s transfer rates
vSupports one 2.5-inch SATA HDD or SSD (max 9.5mm height)
qExpansion slot
v One M.2 SATA SSD slot (22/42,22/60,22/80)
q Onboard Dual LAN
v Supports 10/100/1000 Mbps operation
vSupports IEEE 802.3
q WiFi/Bluetooth support
v 802.11ac (dual-band)
v Bluetooth v4.0
qOnboard Audio
v Stereo analog audio output and Microphone input
qOnboard Graphics support
v Intel HD Graphics 530
v DP 1.2: (max resolution: 3840x2160 @60Hz)
v HDMI 1.4: (max resolution: 4096x2160 @24Hz)
qProduct Size
v 188mm x 188mm x 51mm

ZOTAC ZBOX
4
Safety information
Your ZOTAC ZBOX is designed and tested to meet the latest standards of safety for information
technology equipment. However, to ensure your safety, it is important that you read the following safety
instructions.
Setting up your system
Read and follow all instructions in the documentation before you operate your system.
Do not use this product near water or a heat source such as a radiator.
Set up the system on a stable surface with the provided stand. Never use the system alone
without the stand.
Openings on the chassis are for ventilation. Do not block or cover these openings. Make sure
you leave plenty of space around the system for ventilation. Never insert objects of any kind into
the ventilation openings.
Use this product in environments with ambient temperatures between 0℃and 35℃.
 If you use an extension cord, please use the UL listed cord and make sure that the total
ampere rating of the devices plugged into the extension cord does not exceed its ampere
rating.
Care during use
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
When the system is turned off, a small amount of electrical current still ows. Always unplug all
power, modem, and network cables from the power outlets before cleaning the system.
If you encounter the following technical problems with the product, unplug the power cord and
contact a qualied service technician or your retailer.
¾The power cord or plug is damaged.
¾Liquid has been spilled into the system.
¾The system does not function properly even if you follow the operating instructions.
¾The system was dropped or the cabinet is damaged.
¾The system performance changes.

ZOTAC ZBOX
5
Welcome
Congratulations on your purchase of the ZOTAC ZBOX. The following illustration displays the package
contents of your new ZOTAC ZBOX. If any of the below items is damaged or missed, contact your
retailer.
Package contents
• 1 x ZOTAC ZBOX
• 1 x Stand
• 1 x VESA mount
• 1 x AC Adapter
• 1 x Power Cord
• 1 x Antenna
• 1 x Support DVD
• 1 x USB ash drive with OS drivers
• 1 x User Manual & Warranty Card
• 1 x Quick Start Guide

ZOTAC ZBOX
6
Getting to know your ZOTAC ZBOX
Front view
Refer to the diagram below to identify the components on the front of the ZBOX
1. Headphone/Audio Out jack
The stereo headphone jack (3.5mm) is used to connect the system’s audio output signal to
amplied speakers or headphones.
2. Microphone jack
The microphone jack is designed to connect a microphone for video conferencing, voice
narrations or simple audio recordings.
3. Combo USB 3.1 port / Memory card slot
The Combo USB 3.1 port / Memory card slot is compatible with USB 3.1 devices or SD/SDHC/
SDXC cards used in devices like digital cameras, MP3 players, mobile phones and PDAs.
4. USB 3.1 Type-C port
The type-C USB 3.1 port supports the SuperSpeed USB 3.1 devices and is backwards
compatible with USB 3.0/2.0/1.1 devices. Use this port for USB 3.1 devices for maximum
performance with USB 3.1 compatible devices.
5. WiFi LED
The WiFi LED blinks when data is being transfered over WiFi.
6. Hard disk LED
The hard disk LED blinks when data is being written onto or read from the hard disk drive.
7. IR receiver
The integrated IR receiver is used to receive signals from the IR remote control.
8. Power switch
The power switch allows powering ON and OFF the system.
1 2 3 4 5 6 7 8

ZOTAC ZBOX
7
Rear view
Refer to the diagram below to identify the components on the back of the system.
1. WiFi antenna connector
The WiFi antenna connector supports the included WiFi antenna.
2. Ethernet ports
The eight-pin RJ-45 LAN port supports standard Ethernet cable for connections to local area
networks (LAN) with speeds of 10/100/1000Mbps.
3. USB 3.0 ports
The USB 3.0 port supports the SuperSpeed USB 3.0 devices and is backwards compatible
with USB 2.0/1.1 devices. Use this port for USB 3.0 devices for maximum performance with
USB 3.0 compatible devices.
4. DisplayPorts
DisplayPort supports both external (box-to-box) and internal (laptop LCD panel) display
connections.
5. HDMI port
The HDMI (High Denition Multimedia Interface) port supports a UHD device such as an LCD
TV or monitor to allow viewing on a larger external display.
6. Power input (DC19V)
The supplied power adapter converts AC power to DC power for use with this jack. Power
supplied through this jack supplies power to the PC. To prevent damage to the PC, always
use the supplied power adapter.
The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body.
1 2 3 45 4 6

ZOTAC ZBOX
8
BIOS settings of specic functions
The ZOTAC ZBOX has some specic functions that can be enabled or disabled in the BIOS
settings, such as LED indicator, and IR receiver.
How to disable the ring LED indicator
1. Turn on the ZBOX Mini PC and press <Delete> to enter the BIOS SETUP UTILITY.
2. Use the arrow keys to navigate to the Power menu and select Back Light Support.

ZOTAC ZBOX
9
3. Press <Enter> and select Disabled.
4. Press F10 to save the conguration and exit.

ZOTAC ZBOX
10
How to disable the integrated IR receiver
1. Use the arrow keys to navigate to Features > OnBoard Device Control, and select
CIR Controller Conguration.

ZOTAC ZBOX
11
2. Press <Enter> and select Disabled.
Enabled: enable the internal IR receiver (default)
Disabled: disable the internal IR receiver
3. Press F10 to save the conguration and exit.

ZOTAC ZBOX
12
Installing hardware inside the ZOTAC ZBOX
Before installing hardware, please follow the instructions below to remove the cover of your
ZOTAC ZBOX.
1. Remove the two rear thumb screws.
2. Gently remove the cover as shown below.

ZOTAC ZBOX
13
Installing a memory module
1. Locate the SO-DIMM memory slots and insert a SO-DIMM memory module into the slot
at a 45 degree angle.
Note: When installing two SO-DIMM memory modules, please insert a module into the lower slot rst.
2. Gently press down on the memory module until it locks into place by the arms of the
memory slot.
Note:
1. This ZOTAC ZBOX accomodates two DDR3L SO-DIMM memory modules. You must install at least one module for the
system to function.
2. PLUS models include an memory pre-installed.

ZOTAC ZBOX
14
Removing a memory module
1. Locate the SO-DIMM memory slot and gently press the two arms securing the memory
module outwards, as shown in the image below, to release the memory module.
2. Remove the memory module from the slot at a 45-degree angle.

ZOTAC ZBOX
15
Installing a hard disk drive
1. Locate the 2.5-inch SATA hard disk drive and the hard disk drive bracket.
2. Install the hard drive to the hard disk drive bracket.

ZOTAC ZBOX
16
3. Insert the hard drive into the slot at a 45 degree angle and gently slide into the
connector.
4. Secure the installed drive with a thumb screw.

ZOTAC ZBOX
17
Installing an M.2 SSD
1. Remove the four screws of the fan cover.
2. Remove the CPUFAN3 connector and the fan cover.
3. Insert the M.2 SSD into the slot at a 45 degree angle and gently slide into the connector.

ZOTAC ZBOX
18
4. Secure the M.2 SSD with a screw.
5. Reinstall the fan cover and the CPUFAN3 connector.
*PLUS models include a HDD/SSD pre-installed.

ZOTAC ZBOX
19
Setting up your ZOTAC ZBOX
Please connect your peripherals before using your ZOTAC ZBOX
1
3
4
5
6
2

ZOTAC ZBOX
20
1. Connecting the WiFi antenna
Connect the WiFi antenna to the WiFi antenna connector.
2. Connecting to a network
Connect one end of a network cable to the LAN port on the system rear panel and the other
end to a network router, hub or switch.
3. Connecting to USB 3.0 devices
Connect USB 3.0 devices such as external hard drives, SSDs and ash drives to the USB
3.0 port.
4. Connecting a DisplayPort display
Connect the DisplayPort connector to the DP port of the monitor or display.
5. Connecting to an HDMI display
Connect one end of an HDMI cable to an HDTV or monitor, and the other end to the HDMI
port on the system rear panel.
6. Connecting the power adapter and turning on the ZBOX
Connect the supplied AC adapter to the DC IN jack on the system rear panel and then press
the power switch on the front panel to turn on the system.
When your ZOTAC ZBOX is not in use, unplug the power adapter or switch off the
AC outlet to conserve power.