Zotac ZBOX series User manual

ZOTAC ZBOX
1
ZOTAC ZBOX
User’s Manual
No part of this manual, including the products and software described in it, may
be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form or by any means, except documentation kept by the
purchaser for backup purposes, without the express written permission of ZOTAC.
Products and corporate names mentioned in this manual may not be registered
trademarks or copyrights of their respective companies, and are used for identication
purposes only. All trademarks are the property of their respective owners.
Every effort has been made to ensure that the contents of this manual are correct and
up to date. However, the manufacturer makes no guarantee regarding the accuracy of
its contents, and reserves the right to make changes without prior notice.
CAUTION:
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be
recycled where possible. Disposal of used batteries must be in accordance with local
environmental regulations.

ZOTAC ZBOX
2
Table of Contents
Product specications ----------------------------------------------------------------------------------------3
Safety information ----------------------------------------------------------------------------------------------4
Setting up your system-------------------------------------------------------------------------------------4
Care during use ----------------------------------------------------------------------------------------------4
Welcome -----------------------------------------------------------------------------------------------------------5
Package contents -------------------------------------------------------------------------------------------5
Getting to know your ZOTAC ZBOX ----------------------------------------------------------------------6
Front view -----------------------------------------------------------------------------------------------------6
Rear view ------------------------------------------------------------------------------------------------------7
How to disable the ring LED indicator -------------------------------------------------------------------8
Installing hardware inside the ZOTAC ZBOX ----------------------------------------------------------10
Installing a memory module-------------------------------------------------------------------------------11
Removing a memory module -----------------------------------------------------------------------------12
Installing a hard disk drive --------------------------------------------------------------------------------13
Setting up your ZOTAC ZBOX ------------------------------------------------------------------------------14
Positioning your ZOTAC ZBOX-----------------------------------------------------------------------------16
Installing the stand ------------------------------------------------------------------------------------------16
Attaching your ZOTAC ZBOX to a display ------------------------------------------------------------16
Installing drivers and software -----------------------------------------------------------------------------17
Installing an operating system----------------------------------------------------------------------------17
Installing system drivers -----------------------------------------------------------------------------------17
Using your ZOTAC ZBOX-------------------------------------------------------------------------------------18
Conguring a wireless connection ----------------------------------------------------------------------18
Conguring a wired connection --------------------------------------------------------------------------19
Using a static IP -----------------------------------------------------------------------------------------19
Using a dynamic IP (PPPoE connection) ---------------------------------------------------------19
Conguring audio output-----------------------------------------------------------------------------------20
Installing Windows 7-------------------------------------------------------------------------------------------21

ZOTAC ZBOX
3
Product specications
qMicroprocessor support
v Intel Core i3-6100U (dual core, 2.3 GHz)
qOperating systems:
v Windows 7 / 8.1 / 10 32/64-bit
qSystem Memory support
v Two 204-pin SO-DIMMs DDR3L 1600/1333
v Up to 16 GB of memory
qUSB Ports
v Two USB 3.1 Type-C port, one USB 3.0 port (from SD/USB 3.0 Combo) at front panel
v Two USB 3.0 ports and one USB 2.0 port at rear panel, one USB 3.0 port at top panel
qOnboard Serial ATA
v SATA 6.0 Gb/s transfer rates
vSupports one 2.5-inch SATA HDD or SSD (max 9.5mm height)
q Onboard Dual LAN
v Supports 10/100/1000 Mbps operation
vSupports IEEE 802.3
q WiFi/Bluetooth support
v 802.11ac (dual-band), n/g/b
v Bluetooth v4.0
qOnboard Audio
v Stereo analog audio output and Microphone input
qOnboard Graphics support
v Intel HD Graphics 520
v DP1.2 (max resolution: 3840x2160 @60Hz)
v HDMI1.4 (max resolution: 3840x2160 @30Hz)
qProduct Size
v 188mm x 188mm x 44mm

ZOTAC ZBOX
4
Safety information
Your ZOTAC ZBOX is designed and tested to meet the latest standards of safety for information
technology equipment. However, to ensure your safety, it is important that you read the following safety
instructions.
Setting up your system
Read and follow all instructions in the documentation before you operate your system.
Do not use this product near water or a heat source such as a radiator.
Set up the system on a stable surface with the provided stand. Never use the system alone
without the stand.
Openings on the chassis are for ventilation. Do not block or cover these openings. Make sure
you leave plenty of space around the system for ventilation. Never insert objects of any kind into
the ventilation openings.
Use this product in environments with ambient temperatures between 0℃and 35℃.
 If you use an extension cord, please use the UL listed cord and make sure that the total
ampere rating of the devices plugged into the extension cord does not exceed its ampere
rating.
Care during use
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
When the system is turned off, a small amount of electrical current still ows. Always unplug all
power, modem, and network cables from the power outlets before cleaning the system.
If you encounter the following technical problems with the product, unplug the power cord and
contact a qualied service technician or your retailer.
¾The power cord or plug is damaged.
¾Liquid has been spilled into the system.
¾The system does not function properly even if you follow the operating instructions.
¾The system was dropped or the cabinet is damaged.
¾The system performance changes.

ZOTAC ZBOX
5
Welcome
Congratulations on your purchase of the ZOTAC ZBOX. The following illustration displays the package
contents of your new ZOTAC ZBOX. If any of the below items is damaged or missing, contact your
retailer.
Package contents
• 1 x ZOTAC ZBOX
• 1 x Stand
• 1 x VESA mount
• 1 x AC Adapter
• 1 x Power Cord
• 1 x Antenna
• 1 x Support DVD
• 1 x USB ash drive with OS drivers
• 1 x User Manual & Quick Start Guide
• 1 x Warranty Card

ZOTAC ZBOX
6
Getting to know your ZOTAC ZBOX
Front view
Refer to the diagram below to identify the components on the front of the ZBOX
1. Headphone/Audio Out jack
The stereo headphone jack (3.5mm) is used to connect the system’s audio output signal to
amplied speakers or headphones.
2. Microphone jack
The microphone jack is designed to connect a microphone for video conferencing, voice
narrations or simple audio recordings.
3. Combo USB 3.0 port / Memory card slot
The Combo USB 3.0 port / Memory card slot is compatible with USB 3.0 devices or SD/SDHC/
SDXC cards used in devices like digital cameras, MP3 players, mobile phones and PDAs.
4. USB 3.1 Type-C ports
The type-C USB 3.1 port supports the SuperSpeed USB 3.1 devices and is backwards
compatible with USB 3.0/2.0/1.1 devices. Use this port for USB 3.1 devices for maximum
performance with USB 3.1 compatible devices.
5. WiFi LED
The WiFi LED blinks when data is being transfered over WiFi.
6. Hard disk LED
The hard disk LED blinks when data is being written onto or read from the hard disk drive.
7. Power switch
The power switch allows powering ON and OFF the system.
1 2 3 4 5 6 7

ZOTAC ZBOX
7
Rear view
1 2 3 456 37
Refer to the diagram below to identify the components on the back of the system.
1. WiFi antenna connector
The WiFi antenna connector supports the included WiFi antenna.
2. DisplayPort
DisplayPort supports both external (box-to-box) and internal (laptop LCD panel) display
connections.
3. Ethernet ports
The eight-pin RJ-45 LAN port supports standard Ethernet cable for connections to local area
networks (LAN) with speeds of 10/100/1000Mbps.
4. USB 2.0 port
The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mice,
cameras and hard disk drives.
5. HDMI port
The HDMI (High Denition Multimedia Interface) port supports a UHD device such as an LCD
TV or monitor to allow viewing on a larger external display.
6. USB 3.0 ports
The USB 3.0 port supports the SuperSpeed USB 3.0 devices and is backwards compatible
with USB 2.0/1.1 devices. Use this port for USB 3.0 devices for maximum performance with
USB 3.0 compatible devices.
7. Power input (DC19V)
The supplied power adapter converts AC power to DC power for use with this jack. Power
supplied through this jack supplies power to the PC. To prevent damage to the PC, always
use the supplied power adapter.
The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body.

ZOTAC ZBOX
8
How to disable the ring LED indicator
1. Turn on the ZBOX Mini PC and press <Delete> to enter the BIOS SETUP UTILITY.
2. Use the arrow keys to navigate to the Power menu and select Logo Indicator.

ZOTAC ZBOX
9
3. Press <Enter> and select Turn off.
4. Press F10 to save the conguration and exit.

ZOTAC ZBOX
10
Installing hardware inside the ZOTAC ZBOX
Before installing hardware, please follow the instructions below to remove the cover of your
ZOTAC ZBOX.
1. Remove the two rear thumb screws.
2. Gently remove the cover as shown below.

ZOTAC ZBOX
11
Installing a memory module
1. Locate the SO-DIMM memory slots and insert a SO-DIMM memory module into the slot
at a 45 degree angle.
Note: When installing two SO-DIMM memory modules, please insert a module into the lower slot rst.
2. Gently press down on the memory module until it locks into place by the arms of the
memory slot.
Note: This ZOTAC ZBOX accomodates two DDR3L SO-DIMM memory modules. You must install at least one module for
the system to function. PLUS models include memory pre-installed.

ZOTAC ZBOX
12
Removing a memory module
1. Locate the SO-DIMM memory slot and gently press the two arms securing the memory
module outwards, as shown in the image below, to release the memory module.
2. Remove the memory module from the slot at a 45-degree angle.

ZOTAC ZBOX
13
Installing a hard disk drive
1. Insert the hard disk drive into the slot at a 45 degree angle and gently slide
into the connector.
2. Reinstall the screw.
*PLUS models include a HDD/SSD pre-installed

ZOTAC ZBOX
14
Setting up your ZOTAC ZBOX
Please connect your peripherals before using your ZOTAC ZBOX
1
34
567
2

ZOTAC ZBOX
15
1. Connecting the WiFi antenna
Connect the WiFi antenna to the WiFi antenna connector.
2. Connecting a DisplayPort display
Connect the DisplayPort connector to the DP port of the monitor or display.
3. Connecting to a network
Connect one end of a network cable to the LAN port on the system rear panel and the other
end to a network router, hub or switch.
4. Connecting to USB 2.0 devices
Connect USB 2.0 devices such as keyboards, mice, cameras and hard disk drives.
5. Connecting to an HDMI display
Connect one end of an HDMI cable to an HDTV or monitor, and the other end to the HDMI
port on the system rear panel.
6. Connecting to USB 3.0 devices
Connect USB 3.0 devices such as external hard disk drives, SSDs and ash drives to the USB
3.0 port on the system rear panel.
7. Connecting the power adapter and turning on the ZBOX
Connect the supplied AC adapter to the DC IN jack on the system rear panel and then press
the power switch on the front panel to turn on the system.
When your ZOTAC ZBOX is not in use, unplug the power adapter or switch off the
AC outlet to conserve power.

ZOTAC ZBOX
16
Positioning your ZOTAC ZBOX
Do not position the ZOTAC ZBOX where the ventilation holes are covered. To guarantee
proper use, leave 4 inches (10 cm) spacing in front of the ventilation holes.
ZOTAC Mini PC systems provide ample connectivity in a compact form factor, please choose
connectors and cables in appropriate sizes to avoid interference.
Installing the stand
Position your ZOTAC ZBOX upright with the supplied stand. To do so :
1. Locate the key hole on the bottom of the ZOTAC ZBOX.
2. Align the stand key to the ZBOX key hole and slide the stand forward to lock into place..
Do not place your ZOTAC ZBOX on the desktop without the stand.
Attaching your ZOTAC ZBOX to a display
You can also attach your ZOTAC ZBOX to the back of a display. To do so:
1. Secure the VESA mount to your display with four screws (HNM/M4x8).
2. Place your ZOTAC ZBOX on the VESA mount noting the correct alignment and snap the
ZBOX into place on the mount.
To fasten the VESA mount, your display must comply with VESA75 Or VESA100 standard.
Mechanical Loading Stability - Please ensure the display rests on a stable platform before
attaching ZOTAC ZBOX to prevent damage or injuries from a fall or drop.
If the total weight of your display and ZOTAC ZBOX is over 7kg, the system may be unstable.




ZOTAC ZBOX
17
Installing drivers and software
Installing an operating system
The ZOTAC ZBOX does not ship with an operating system preinstalled. The user must install
the operating system before the ZOTAC ZBOX can be used. The following operating systems
are supported:
• Windows 7 / 8.1 / 10 32/64-bit
Follow the instructions below to install an operating system:
1. Attach external DVD drive via USB 3.0 or 2.0 ports.
Note: USB 3.1 Type-C ports do not support OS installation.
2. Insert disk for operating system (Windows or Linux).
3. Wait for the ZOTAC ZBOX to boot from the disk.
4. Follow the onscreen directions to install the operating system.
5. Install system drivers to gain full functionality of the ZOTAC ZBOX hardware and features.
Installing system drivers
Before you can use the full features of the ZOTAC ZBOX, the system drivers must be installed.
The following types of operating systems are supported by the ZOTAC ZBOX driver DVD and
USB ash drive:
• Windows 7 / 8.1 / 10 32/64-bit
Follow the instructions below to install the system drivers:
1. Insert the ZOTAC ZBOX driver DVD or driver USB ash drive. If autorun is enabled, the
driver installation main menu will show up automatically. If autorun is disabled, you may
click the le Launch.EXE to bring up the driver installation main menu.
2. The following drivers are available on the DVD and USB ash drive:
• Intel Chipset Driver
• HDA Sound Driver
• Intel Graphics Driver
• Ethernet PCI-E Driver
• Wireless Network Driver
• Intel Management Engine
• Bluetooth Driver

ZOTAC ZBOX
18
• MassStorage Driver
• Asmedia USB Controller
• USB Charger (optional)
Note: If you want to use high-amperage USB
charging for smartphones and tablets, please
install the driver USB Charger driver.
Each driver must be installed individually to
ensure proper operation of the ZOTAC ZBOX.
3. Select the driver you want to install. The driver
installer should launch.
4. Follow the onscreen instructions to install the
drivers.
5. Restart the system.
Using your ZOTAC ZBOX
Conguring a wireless connection
Please follow the instructions below to connect to a wireless network:
1. Double-click the wireless network icon (pic) in the notication area.
2. Select the wireless network you want to connect to from the list and
click Connect.
3. After connection is established, you will see “Connected.”
Note 1: For security concerns, Do NOT connect to an unsecured network,
otherwise, the transmitted information without encryption might be visible to
others.
Note 2: Enter the network security key if necessary.

ZOTAC ZBOX
19
Using a dynamic IP (PPPoE connection)
1. Repeat Step 1-3 in the previous section.
2. Select “Obtain an IP address automatically” and click “OK”.
3. Click “Create a new
connection” to start the NEW
Connection Wizard.
4. Click “Next”.
5. Select “Connect to the
Internet” and click “Next”.
6. Select “Set up my
connection manually”.
7. Select your connection
type and click “Next”.
8. Enter your ISP Name and
click “Next”.
9. Enter your User name and
Password. Click “Next”.
Conguring a wired connection
Using a static IP
1. Right-click the network icon in the notication
area and select “Open Network Connections”.
2. Right-click “Local Area Connection” and
select “Properties”.
3. Highlight “Internet Protocol (TCP/IP)” and
click “Properties”.
4. Select “Use the following IP address”.
5. Enter your IP address, subnet mask and
Default gateway.
6. Enter the preferred DNS server address if
necessary.
7. After entering all of the related values, click “OK” to nish the conguration.

ZOTAC ZBOX
20
10. Click “Finish” to nish the conguration.
11. Enter your user name and password. Click “Connect” to connect to the internet.
Note: Contact your internet Service Provider (ISP) if you have problems connecting to the network.
Conguring audio output
Follow the steps below to enable audio output when connecting the ZOTAC ZBOX to a TV or
receiver via DP/HDMI adapter.
1. Access the Sound settings via the system
Control Panel.
2. Under Playback devices, click the display device
that corresponds with your audio compatible
display.
3. Click the “Set Default” button in the lower right
hand corner.
4. Click “OK” to exit the setup.