Zotac ZBOXNANO-ID61-PLUS-U User manual
лчиттничюнльтцию.
глтчн.Бзвыдны
www.sotmarket.ru
дбняинфмциятв,
тзывы,бзыиы
Инструкция
ZOTAC ZBOXNANO-ID61-PLUS-U
Перейти в карточку товара
8 800 775 98 98
1
ZOTAC ZBOX nano
ZOTAC ZBOX nano
User’s Manual
No part of this manual, including the products and software described in it,
may be reproduced, transmitted, transcribed, stored in a retrieval system,
or translated into any language in any form or by any means,except
documentation kept by the purchaser for backup purposes, without the
express written permission of ZOTAC.
Products and corporate names mentioned in this manual may not be reg-
istered trademarks or copyrights of their respective companies, and are
respective owners.
Every effort has been made to ensure that the contents of this manual are cor-
rect and up to date. However, the manufacturer makes no guarantee regard-
ing the accuracy of its contents, and reserves the right to make changes
without prior notice.
CAUTION:
Risk of explosion if the battery is replaced with an incorrect type. Batteries
should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.
2
ZOTAC ZBOX nano
Table of Contents
-------------------------------------------------------------------------- 3
-------------------------------------------------------------------------------- 4
Setting up your system ----------------------------------------------------------------------- 4
Care during use -------------------------------------------------------------------------------- 4
--------------------------------------------------------------------------------------------- 5
Package contents ------------------------------------------------------------------------------ 5
------------------------------------------------ 6
Front view ---------------------------------------------------------------------------------------- 6
Rear view----------------------------------------------------------------------------------------- 7
--------------------------------------------------------- 8
How to disable the ring LED indicator ---------------------------------------------------- 8
How to enable USB2.0 charge (for S3/S4/S5 status)--------------------------------- 10
High Current/Fast Charging USB ports ---------------------------------------------- 11
------------------------------------------------------- 12
Installing a memory module ----------------------------------------------------------------- 13
Installing a hard disk -------------------------------------------------------------------------- 14
Connecting a SPDIF cable ------------------------------------------------------------------ 15
---------------------------------------------------------- 16
--------------------------------------------------------- 18
Mounting the ZOTAC ZBOX nano to a LCD monitor---------------------------------- 18
IR receiver --------------------------------------------------------------------------------------- 19
Remote control (optional) -------------------------------------------------------------------- 20
Function keys ------------------------------------------------------------------------------- 20
Lithium cell installation-------------------------------------------------------------------- 21
--------------------------------------------------------------- 22
Installing an operating system -------------------------------------------------------------- 22
Installing system drivers---------------------------------------------------------------------- 22
--------------------------------------------------------------- 23
----------------------------------------------------------- 23
--------------------------------------------------------------- 23
Using a static IP ---------------------------------------------------------------------------- 23
Using a dynamic IP (PPPoE connection) -------------------------------------------- 24
------------------------------------------ 24
3
ZOTAC ZBOX nano
Audio
4
ZOTAC ZBOX nano
Safety information
Your ZOTAC ZBOX is designed and tested to meet the latest standards of safety for infor-
the following safety instructions.
Setting up your system
Read and follow all instructions in the documentation before you operate your system.
Do not use this product near water or a heat source such as a radiator.
Set up the system on a stable surface with the provided stand. Never use the system
alone without the stand.
Openings on the chassis are for ventilation. Do not block or cover these openings.
Make sure you leave plenty of space around the system for ventilation. Never insert
objects of any kind into the ventilation openings.
Use this product in environments with ambient temperatures between 0and 35.
If you use an extension cord, please use the UL listed cord and make sure that
the total ampere rating of the devices plugged into the extension cord does not
exceed its ampere rating.
Care during use
Do not walk on the power cord or allow anything to rest on it.
unplug all power, modem, and network cables from the power outlets before cleaning
the system.
If you encounter the following technical problems with the product, unplug the power
¾The power cord or plug is damaged.
¾
¾The system does not function properly even if you follow the operating instructions.
¾The system was dropped or the cabinet is damaged.
¾The system performance changes.
,
5
ZOTAC ZBOX nano
Welcome
Congratulations on your purchase of the ZOTAC ZBOX nano mini-PC. The following
illustration displays the package contents of your new ZOTAC ZBOX nano. Please contact
your retailer If any of the below items are damaged or missed.
6
ZOTAC ZBOX nano
Getting to know your ZOTAC ZBOX nano
Front view
Refer to the diagram below to identify the components on this side of the system
The power switch turns the mini-PC ON and OFF.
The HDD status indicator shows when the hard disk is transfering data.
The IR receiver is used to receive the signal from the IR remote control.
The built-in memory card reader reads and writes MMC/SD/SDHC/MS/MS Pro/xD/
SDXC cards used in devices such as digital cameras, MP3 players, mobile phones
and PDAs.
The headphone/SPDIF jack (3.5mm) is used to connect the system’s audio out
the headphone/SPDIF adapter included in the package. The optical SPDIF output
enables connecting the ZBOX nano to digital audio receivers and speakers for
crystal clear digital audio and surround sound from compatible soundtracks.
The microphone jack is designed to connect a microphone for video conferencing,
voice narrations or simple audio recordings.
Note 1: The power adapter may become warm to hot when in use. Do not cover the adapter and keep it
away from your body.
Note 2: Due to the special design for easy upgrade, some connectors are placed upside down.
1
2
3
4
5
6
7
7
ZOTAC ZBOX nano
Rear view
Refer to the diagram below to identify the components on this side of the system.
The supplied power adapter converts AC power to DC power for use with this jack.
Power supplied through this jack supplies power to the mini-PC. To prevent damage
to the mini-PC, always use the supplied power adapter.
2. HDMI output
DisplayPort supports both external (box-to-box) and internal (laptop LCD panel)
display connections.
The USB 3.0 ports support the SuperSpeed USB 3.0 devices and are backwards
compatible with USB 2.0/1.1 devices. Use the ports for USB 3.0 devices for
maximum performance with USB 3.0 compatible devices.
local area network (LAN) with speeds of 10/100/1000Mbps.
The USB (Universal Serial Bus) ports are compatible with USB devices such as
keyboards, mice, cameras and hard disk drives.
7. eSATA port
The external SATA port is compatible with e.SATA devices such as external hard
drives and Blu-ray drives.
The ventilation area is designed for cooling.
1
2
3
4
5 7
6
9
8
8
ZOTAC ZBOX nano
How to disable the ring LED indicator
1. Turn on the ZBOX nano mini-PC, then press <Delete> to enter the BIOS
SETUP UTILITY.
2. Use the arrow keys to navigate to the menu and select
.
BIOS settings, such as LED indicator, and USB2.0 charge.
ZOTAC ZBOX nano
3. Press <Enter> to display the and navigate to
Back Light.
4. Press <Enter> and select .
5. t.
ZOTAC ZBOX nano
How to enable USB2.0 charge (for S3/S4/S5 status)
1. In Chipset menu, select and press <Enter>.
2. Use the arrow keys to enter the item , and select
Mode.
Note: Before charging via USB2.0 in S5 status, please make sure the Deep S5 is
disabled.
1. In Advanced menu, select and press <Enter>.
11
ZOTAC ZBOX nano
If you want a faster, less restricted way of charging your mobile phone and tablet from
your mini-PC enters Standby mode (S1), Suspend to RAM (S3), Hibernation mode
marvelous charging experience than ever.
Please visit the ZOTAC website “Support” -> “Download” to get the USB Charging
driver for your mini-PC:
2. Use the arrow keys to enter the item Deep S5, and select
12
ZOTAC ZBOX nano
Customizing the ZOTAC ZBOX nano
Please follow the instructions below to remove the cover of the ZOTAC ZBOX nano
1. Remove the four screws securing the bottom cover into place.
13
ZOTAC ZBOX nano
Installing a memory module
1. Locate the SO-DIMM memory slot and insert a SO-DIMM memory module
into the slot at a 45 degree angle.
of the memory slot.
14
ZOTAC ZBOX nano
2. Install the hard disk bracket to a 2.5-inch SATA hard disk with 2 screws.
3. Insert the hard disk into the socket and gently slide into the connector.
Installing a hard disk
1. Locate the hard disk bracket, remove the 2 screws, and remove the hard disk
bracket as shown in the image below.
15
ZOTAC ZBOX nano
4. Reinstall the screws of the hard disk bracket.
Connecting a SPDIF cable
1. Connect the SPDIF cable to the headphone/SPDIF adapter correctly.
2. Locate the front panel and connect the headphone/SPDIF adapter to the
headphone/SPDIF jack.
16
ZOTAC ZBOX nano
Setting up the ZOTAC ZBOX nano
Please connect the peripherals before using the ZOTAC ZBOX nano.
Connect the DisplayPort connector to the DP port.
the USB 3.0 port.
Connect USB 2.0 devices like wired/wireless keyboards (varying with areas),
mouse devices and printers to the USB 2.0 ports.
1
2
3
4
17
ZOTAC ZBOX nano
Connect the supplied AC adapter to the DC IN jack on the system rear panel and
then press the power switch on the front panel to turn on the system.
Connect one end of an HDMI cable to the HDMI port on the system rear panel
by default.)
Connect one end of a network cable to the LAN port on the system rear panel and
the other end to a network hub, switch or router.
Connect one end of an eSATA device to the eSATA port.
to conserve power.
567
8
18
ZOTAC ZBOX nano
Positioning the ZOTAC ZBOX nano
proper operation and reliability, leave aproximately 4 inches (10 cm) of spacing in
front of the ventilation holes.
interference.
Mounting the ZOTAC ZBOX nano to a LCD monitor
Disclaimer: ZOTAC cannot be held liable for damages resulting from an improper installation.
the ZBOX to the mount.
This manual suits for next models
2
Table of contents
Other Zotac Desktop manuals
Zotac
Zotac VR GO User manual
Zotac
Zotac ECM74060C User manual
Zotac
Zotac ZBOX HD-ID11 User manual
Zotac
Zotac ZBOX series User manual
Zotac
Zotac ZBOX CI622 nano User manual
Zotac
Zotac VR GO 2.0 User manual
Zotac
Zotac ZBOX MI660nano User manual
Zotac
Zotac ZBOX ID36BR3D User manual
Zotac
Zotac ZBOX EK3105T User manual
Zotac
Zotac ZBOX NANO User manual
Zotac
Zotac MAGNUS ONE User manual
Zotac
Zotac MEK ULTRA User manual
Zotac
Zotac ZBOX M Series User manual
Zotac
Zotac ZBOX Giga User manual
Zotac
Zotac ZBOX C NANO Series User manual
Zotac
Zotac ZBOX nano XS User manual
Zotac
Zotac ZBOX NANO User manual
Zotac
Zotac ZBOX P Series User manual
Zotac
Zotac ZBOX ADO5BR User manual
Zotac
Zotac ZBOX series User manual
