Zte ZXSDR R8860 User manual

ZXSDRR8860
CDMARemoteRadioUnit-8860
InstallationManual
ZTECORPORATION
ZTEPlaza,KejiRoadSouth,
Hi-TechIndustrialPark,
NanshanDistrict,Shenzhen,
P .R.China
518057
Tel:[phone]
Fax:[phone]
URL:http://ensupport.zte.com.cn
E-mail:[email protected]

LEGALINFORMATION
Copyright©2006ZTECORPORATION.
Thecontentsofthisdocumentareprotectedbycopyrightlawsandinternationaltreaties.Anyreproductionordistributionof
thisdocumentoranyportionofthisdocument,inanyformbyanymeans,withoutthepriorwrittenconsentofZTECORPO-
RATIONisprohibited.Additionally,thecontentsofthisdocumentareprotectedbycontractualcondentialityobligations.
Allcompany,brandandproductnamesaretradeorservicemarks,orregisteredtradeorservicemarks,ofZTECORPORATION
oroftheirrespectiveowners.
Thisdocumentisprovided“asis” ,andallexpress,implied,orstatutorywarranties,representationsorconditionsaredis-
claimed,includingwithoutlimitationanyimpliedwarrantyofmerchantability,tnessforaparticularpurpose,titleornon-in-
fringement.ZTECORPORATIONanditslicensorsshallnotbeliablefordamagesresultingfromtheuseoforrelianceonthe
informationcontainedherein.
ZTECORPORATIONoritslicensorsmayhavecurrentorpendingintellectualpropertyrightsorapplicationscoveringthesubject
matterofthisdocument.ExceptasexpresslyprovidedinanywrittenlicensebetweenZTECORPORATIONanditslicensee,
theuserofthisdocumentshallnotacquireanylicensetothesubjectmatterherein.
ZTECORPORATIONreservestherighttoupgradeormaketechnicalchangetothisproductwithoutfurthernotice.
UsersmayvisitZTEtechnicalsupportwebsitehttp://ensupport.zte.com.cntoinquirerelatedinformation.
TheultimaterighttointerpretthisproductresidesinZTECORPORATION.
RevisionHistory
RevisionNo.RevisionDateRevisionReason
R1.008/30/2008FirstEdition
SerialNumber:sjzl20082714

Contents
Preface...............................................................i
SafteyDescription.............................................1
SafetySpecicationsGuide..............................................1
SafetySymbols..............................................................2
SafetyInstructions.........................................................3
InstallationOverview........................................7
ComponentstobeInstalled.............................................7
InstallationFlow.............................................................7
InstallationPreparation...................................................8
EngineeringConditionInspection..................................8
ToolsandInstrumentsPreparation................................9
On-siteDocuments...................................................10
UnpackingAcceptance................................................11
CountingGoods................................................11
CrateUnpacking...............................................11
CartonUnpacking.............................................12
AcceptanceandGoodsHandover.........................12
CabinetInstallation.........................................15
EngineeringIndices.......................................................15
InstallationModeInstruction...........................................16
Pole-mountedInstallationMode.......................................17
ComponentsUsedinPole-mountInstallation.................17
InstallingT woZXSDRR8860C806Pole-mountCabinets
(WithoutWaveTrap)..........................................19
InstallingT woZXSDRR8860C806Pole-mountCabinets
(WithWaveTrap)...............................................22
InstallingThreeZXSDRR8860C806CabinetsonPole
(WithoutWaveTrap)..........................................25
InstallingThreeZXSDRR8860C806CabinetonPole
(WithWaveTrap)...............................................27
Wall-mountedInstallationMode.......................................33

ComponentsUsedinWall-MountInstallation.................33
InstallingCabinetonWall(Wall-Mount)........................34
FloorGantry-mountedInstallationMode...........................37
ComponentsUsedingantry-mountInstallation..............37
InstallingCabinetonGantry(WithoutWaveTrap)..........41
InstallingCabinetonGantry(WithWaveTrap)...............44
SimpliedCabinetIntegratedInstallationMode.................54
ComponentsUsedinIntegratedInstallation..................54
InstallingIntegratedCabinet.......................................57
InstallingSunshield......................................................65
ExternalCableInstallation..............................67
ExternalCableLayout....................................................67
ExternalCableInstallationFlow.......................................69
InstallingPowerCable....................................................70
InstallingGroundingCable..............................................71
InstallingFiberbetweenBBUandRRU..............................72
InstallingFiberbetweenRRUandRRU..............................73
InstallingEnvironmentMonitoringCable...........................75
InstallingAISGControlCable..........................................76
InstallingFrequencyPointExtensionCable........................77
InstallingJumper...........................................................78
MainAntennaFeederSystemInstallation........79
MainAntennaFeederSystemStructure............................79
MainAntennaFeederSystemInstallationPreparation.........85
MainAntennaFeederSystemInstallationFlow..................86
AntennaInstallation.......................................................87
AntennaInstallationTechnicalSpecications.................87
AntennaInstallationPosition.......................................88
DirectionalAntennaInstallation...................................88
OmniAntennaInstallation..........................................91
ConnectJumperandAntenna......................................91
FeederInstallation.........................................................92
FeederCuttingPrinciple..............................................92
FeederInstallationonTopofBuilding...........................93
FeederInstallationonTower.......................................94
FeederLayoutPrinciples.............................................96
FeederFixingProcedures............................................97
FeederGroundingPrinciple.........................................97
FeederGroundingClipsInstallation..............................99
ConnectJumperandFeeder......................................102

InstallingFeederHermetic-window................................102
FeederIndoorIngoing..................................................104
FeederIndoorArrangementPrinciple..........................104
LeadingMainFeederintoRoom................................105
InstallingT op-equipmentJumper...............................107
PerformingAntennaFeederSystemTest.........................108
PerformingOutdoor-connectorWaterproofProcess-
ing....................................................................109
PerformingFeederHermetic-windowWaterproof
Processing..........................................................111
CabinetJumperInstallationDescription..........................114
VSWRT est..................................................................115
HardwareInstallationInspection..................117
CheckingCabinetInstallation........................................117
CheckingCableInstallation...........................................117
CablesInstallationGeneralSpecication.....................117
PowerandGroundingCablesInstallationCheck...........119
OpticalFiberInstallationCheck.................................120
CheckingMainAntennaSystemInstallation....................120
Poweronandoff...........................................123
PoweronPreparation...................................................123
PowerON...................................................................123
PowerOFF..................................................................123
Cabinet-combinedInstallation......................125
ComponentsUsedinCabinet-combiningInstallation.........125
PerformingCabinet-combination....................................127
CascadingCabinetInstallation......................129
ComponentsUsedinCascadingInstallation.....................129
PerformingCabinetCascading.......................................130
OAU...............................................................131
OAUT echnicalIndices..................................................131
OAUAppearanceandInterface......................................132
OAUPoleInstallation...................................................134
OAUOn-wallInstallation...............................................140
OAUCableInstallation.................................................143
OLP48-2........................................................149
OLP48-2T echnicalIndices............................................149
OLP48-2AppearanceandInterface................................149
OLP48-2InstallationDescription....................................151

ILP48-3.........................................................157
ILP48-3T echnicalIndices.............................................157
ILP48-3AppearanceandInterface.................................158
ILP48-3InstallationDescription.....................................159
ACLightningArrester....................................161
ACLightningTechnicalIndices.......................................161
ACLightningAppearanceandInterface..........................162
ACLightningInstallationDescription..............................163
ShieldedGroundingKitInstallation................................168
PDM...............................................................173
PDMAppearanceandInterface......................................173
PDMInstallation..........................................................174
Figures..........................................................177
Tables...........................................................183
ListofGlossary..............................................185

Preface
PurposeZXSDRR8860isanoutdoorremoteRFunit.Composinganinte-
gratedBTS,ZXSDRR8860andBBUimplementwirelesstransmis-
sionwithincoverageareas,controlofwirelesschannelaswellas
communicationwithBSC.
Thismanualprovidesbasicinstallationguideforengineeringper-
sonnelwhoperformZXSDRR8860hardwareinstallation.Atthe
sametime,itservesforthereferencematerialforthepersonnel
responsibleforoperationandmaintenance.
Intended
Audience
Thisdocumentisintendedforengineersandtechnicianswhoper-
forminstallationactivitiesonZXSDRR8841C804remoteradio
unit.
PrerequisiteSkill
andKnowledge
Tousethisdocumenteffectively,usersshouldhaveageneralun-
derstandingofZXSDRR8860equipmentanditscomponents.Fa-
miliaritywiththefollowingishelpful:
�cdma2000fundamental
�ZXSDRR8860hardwarestructure
WhatisinThis
Manual
Thismanualcontainsthefollowingchaptersandappendixes:
ChapterSummary
Chapter
1Safety
Instruction
DescribesprecautionsinZXSDRR8860installationor
operationmaintenanceaswellasthemeaningsof
varioussafetysymbols.
Chapter2
Installation
Overview
DescribestherequirementsforZXSDRR8860
installationpersonnel,theinstallationowsand
installationpreparation.
Chapter
3Cabinet
Installation
DescribesfourinstallationmodesofZXSDRR8860
cabinetandinstallationsituations.
Chapter4
External
Cable
Installation
DescribestheinstallationmethodsofvariousZXSDR
R8860externalcables.
Chapter
5Main
Antenna
Feeder
System
Installation
Describestheinstallationowsandinstallationmethods
ofZXSDRR8860mainantennafeedersystem.
Chapter6
Hardware
Installation
Inspection
Describestheinspectionmethodsofcabinetandcables
afterinstallationcompletion.
ConfidentialandProprietaryInformationofZTECORPORATIONi

ZXSDRR8860InstallationManual
ChapterSummary
Chapter7
Poweron
andoff
DescribesthemethodsandprecautionsofZXSDR
R8860poweronandoff.
Appendix
ACabinet-
combined
Installation
DescribesthemethodofZXSDRR8860cabinet-
combinedinstallation.
AppendixB
Cascading
Cabinet
Installation
DescribesthemethodofZXSDRR8860cascading
cabinetinstallation.
AppendixC
OutdoorAC
UnitOAU
Describestechnicalindices,appearanceinterfaces,
installationintroductionandcableconnectionofOAU.
AppendixD
OutdoorDC
Lightning
Box
(OLP48–2)
Describestechnicalindices,appearanceinterfaceand
installationintroductionofoutdoorDClightningbox.
AppendixE
IndoorDC
Lightning
Box
(ILP48–3)
Describestechnicalindices,appearanceinterfaceand
installationintroductionofindoorDClightningbox.
Appendix
FAC
Lightning
Box
Describesappearanceinterfacesandcableconnection
ofAClightningbox.
Appendix
GPower
Distribution
Box(PDM)
Describesappearance,interfaceandinstallation
introductionofPDM.
iiConfidentialandProprietaryInformationofZTECORPORATION

Chapter1
SafteyDescription
TableofContents:
SafetySpecicationsGuide..................................................1
SafetySymbols..................................................................2
SafetyInstructions.............................................................3
SafetySpecificationsGuide
Thesesafetyinstructionsmustbeconsideredassupplementaryfor
localsafetyregulations.Theprioritymustbegiventolocalsafety
regulationsifthereisanyconictbetweenthetwo.
Themaintenancepersonnelmusthavetheknowledgeofsafety
operationsandmaintenancewithrequiredqualicationandtech-
nicalbackground.
Warning:
Thisdevicecomplieswithpart15oftheFCCRules.Operationis
subjecttothefollowingtwoconditions:(1)Thisdevicemaynot
causeharmfulinterference,and(2)thisdevicemustacceptany
interferencereceived,includinginterferencethatmaycauseunde-
siredoperation.Changesormodicationsnotexpresslyapproved
bythepartyresponsibleforcompliancecouldvoidtheuser’sau-
thoritytooperatetheequipment.
Alltheoperationandmaintenancepersonnelmustfollowthe
safetyprecautionsandinstructionsprovidedbyZTECorporation
toavoidanyaccident.
Note:
ZTECorporationdoesnotbearanyliabilitiesincurredbecauseof
violationoftheuniversalsafetyoperationrequirements,orviola-
tionofsafetystandardsfordesigning,manufacturingandusing
theequipment.
ConfidentialandProprietaryInformationofZTECORPORATION1

ZXSDRR8860InstallationManual
SafetySymbols
Table1listssafetysymbols.Theyaretoprompttheuserofthe
safetyprecautionstobeobservedduringZXSDRR8860operation
andmaintenance.
TABLE1SAFETYSYMBOLSDESCRIPTION
SafetySymbolsMeaning
Nosmoking:Smokingisforbidden
Noflammables:Noflammablescanbestored.
Notouching:Donottouch.
Universalalertingsymbol:Generalsafety
attentions.
Electricshock:Riskofelectricshock.
Electrostatic:Thedevicemaybesensitiveto
staticelectricity.
Microwave:Bewareofstrongelectromagnetic
field.
Laser:Bewareofstronglaserbeam.
Scald:Bewareofscald.
Amongstthesesafetysymbols,theuniversalalarmsymbolsare
classiedintothreelevels:danger ,warning,andcaution.The
formatsandmeaningsofthethreelevelsaredescribedasbelow:
Danger:
Indicatesapotentiallyhazardoussituationwhich,ifnotavoided,
willresultindeathorseriousinjuryofpeople,orequipmentdam-
agesandbreakdown.
2ConfidentialandProprietaryInformationofZTECORPORATION

Chapter1SafteyDescription
Warning:
Indicatesapotentiallyhazardoussituationwhich,ifnotavoided,
couldresultindeathorseriousinjury.
Caution:
Indicatesapotentiallyhazardoussituationwhich,ifnotavoided,
couldresultinseriousinjuries,equipmentdamagesorinterruption
ofpartservices.
SafetyInstructions
Thissectiondescribesthesafetyinstructionsrelatedtoelectrical
safety,antistatic,heavyobjectsandboards.
ElectricalSafety
Instructions
Thefollowingaretheelectricalsafetyinstructionsabouttools,high
voltage,powercables,holesandlightning:
�Tools
Usespecialtoolsratherthancommontoolsforhigh-voltage
andACoperations.
�HighVoltage
Danger:
Highvoltageishazardous.Directorindirectcontactwithhigh
voltageormainsupplyusingawetobjectcouldresultindeath.
�StrictlyfollowlocalsafetyrulestoinstallACpowerequip-
ments.
�Installationstaffmustbequaliedforperforminghigh-volt-
ageandACoperations.
�Donotwearanywatch,handchain,bracelet,ringorany
otherconductiveobjectduringsuchoperations.
�Preventmoisturefromaccumulatingontheequipmentdur-
ingoperationsinadampenvironment.
�PowerCable
ConfidentialandProprietaryInformationofZTECORPORATION3

ZXSDRR8860InstallationManual
Warning:
Neverinstalloruninstallpowercableswhiletheyarelive.Oth-
erwise,thepowercable,whencontactingaconductor ,mayre-
sultinsparksorelectricarccausingareorevendamageto
eyes.
�Makesuretoshutoffpowersupplybeforeinstallingordis-
connectingapowercable.
�Beforeconnectingthepowercable,makesurethatthecon-
nectingcableanditslabelisappropriatefortheactualin-
stallationrequirements.
�DrillingHoles
Warning:
Itisnotallowedtodrillcabinetholeswithoutpermission.
�Unqualieddrillingcoulddamagewiringandcablesinside
thecabinet.Additionally,metalpiecesinsidethecabi-
netcreatedbythedrillingcouldresultinashortedcircuit
board.Useinsulationprotectionglovesandmovecables
withinthecabinetawayrstwhendrillingisnecessaryon
acabinet.
�Protecteyesduringdrillingasdustoryingdebrismay
damageeyes.
�Cleananydebrisintimeafterdrilling.
�Lightning
Danger:
Donotperformhigh-voltage,AC,irontowerormastoperations
inathunderstorm.
Thunderstormswouldgiverisetoastrongelectromagnetic
eldintheatmosphere.Therefore,theequipmentmustbe
groundedandprotectedintimeagainstlightningstrikes.
AntistaticSafety
InstructionsElectrostatic:
Staticelectricityproducedbyhumanbodycandamagestatic-sen-
sitivecomponentsoncircuitboard,suchaslarge-scaleintegrated
circuits.
�Frictioncausedbyhumanbodyactivitiesistherootcauseof
electrostaticchargeaccumulation.Staticvoltagecarriedbya
humanbodyinadryenvironmentcanbeupto30kV ,and
canremaininthereforalongtime.Anoperatorwithstatic
4ConfidentialandProprietaryInformationofZTECORPORATION

Chapter1SafteyDescription
electricitymaydischargeelectricitythroughacomponentwhen
he/shetouchestheconductorandcausingdamage.
�Wearanantistaticwriststrap(theotherendofwriststrapmust
bewellgrounded)beforetouchingtheequipmentorholding
aplug-inboard,circuitboard,IntegratedCircuit(IC)chipor
otherdevices,topreventhumanstaticelectricityfromdamag-
ingsensitivecomponents.
�Aresistorover1MΩshouldbeconnectedinseriesonthecable
betweentheantistaticwriststrapandthegroundingpoint,to
protecttheoperatoragainstaccidentalelectricshock.Resis-
tanceover1MΩislowenoughtodischargestaticvoltage.
�Theantistaticwriststrapusedmustbesubjecttoregular
check.Donotreplacethecableofanantistaticwriststrap
withanyothercable.
�Donotcontactstatic-sensitiveboardswithanyobjectthateas-
ilygeneratesstaticelectricity.Forexample,frictionofpackage
bag,transferboxandtransferbeltmadefrominsulationplas-
ticmaycausestaticelectricityoncomponents.Dischargeof
staticelectricitymaydamagecomponentswhentheycontact
ahumanbodyortheground.
�Boardshouldonlycontactmaterialssuchasantistaticbag.
Keepboardsinantistaticbagsduringstorageandtransporta-
tion.
�Dischargestaticelectricityofthetestdevicebeforeuse,that
is,groundthetestdevicerst.
�DonotplacetheboardnearastrongDCmagneticeld,such
asthecathode-raytubeofamonitor .Keeptheboardatleast
10cmaway.
HoistingHeavy
Objects
Warning:
Whenhoistingheavyobjects,ensurethatnobodyisstandingor
walkingunderthehoistedobject.
�Ensurethehoistercanmeethoistingrequirementswhendis-
assemblingheavyequipment,ormovingandreplacingequip-
ment.
�Theoperatormustbedulytrainedandqualiedforhoisting
operations.
�Hoistingtoolsmustbeinspectedandcompletebeforeservice.
�Makesurethathoistingtoolsarexedrmlyonasufciently
securedobjectorwallbeforethehoistingoperation.
�Givebrieforalinstructionsduringhoistingoperationstopre-
ventanymishap.
Unplugging/Plug-
gingaBoard
�Neverplugaboardwithexcessiveforce,toensurethatthe
pinsonthebackplanedonotgetdeformed.
�Plugtheboardrightintotheslotandmakesureboardcircuit
facesdonotcontacteachotherlestanyshortcircuitmayoccur .
�Keephandsofftheboardcircuit,components,connectorsand
cabletroughwhenholdingaboard.
ConfidentialandProprietaryInformationofZTECORPORATION5

ZXSDRR8860InstallationManual
OtherSafety
Instructions
Note:
Donotperformmaintenanceordebuggingindependently,unless
aqualiedpersonispresent.
�Replacinganypartsormakinganychangestotheequipment
mightresultinanunexpecteddanger .Therefore,besurenot
toreplaceanypartsorperformanychangestotheequipment
unlessauthorizedotherwise.
�ContactZTEofceifyouhaveanyquestion,toensureyour
safety.
6ConfidentialandProprietaryInformationofZTECORPORATION

Chapter2
InstallationOverview
TableofContents:
ComponentstobeInstalled.................................................7
InstallationFlow.................................................................7
InstallationPreparation.......................................................8
ComponentstobeInstalled
ForZXSDRR8860,thefollowingcomponentswillbeinstalled:
�ZXSDRR8860cabinetandcomponents
Note:
Theinnercablesandfunctionalmodules/boardsinthecabinet
arealreadyinstalledbeforeequipmentdelivery.
�Sunshield(usedfortheoutdoorZXSDRR8860installation)
�Cables
�Antennafeedersystemincludingantenna,jumpersandfeeder
InstallationFlow
TheinstallationowofZXSDRR8860isdemonstratedinFigure1
.However ,itisnotrequiredtostrictlyfollowthestepsshowedin
thisow.Theactualinstallationproceduresdependontheonsite
requirements.
ConfidentialandProprietaryInformationofZTECORPORATION7

ZXSDRR8860InstallationManual
FIGURE1INSTALLATIONFLOW
InstallationPreparation
EngineeringConditionInspection
Beforeinstallingdevices,followtherequirementsofEnvironment
AcceptanceReportandcheckinstallationenvironment.Thefol-
lowingcontentisjustasareference.
Installation
Position
Inspection
ZXSDRR8860installationpositionshouldaccordwiththerequire-
mentsofengineeringdesign,thespeciedrequirementsasfol-
lows:
�Avoiddusty,harmful-gasorexplosive-goodsenvironment;
�Avoidtheplaceswithbigshockorstrongnoise;
�Farawaysubstation;
�Farawaypollutionsource;
�Avoidanindustrialboilerandheatingboiler;
�Farawayhigh-powerwirelessinterferencesource.
Temperature
andHumidity
Inspection
ZXSDRR8860temperatureandhumidityinworkenvironment
shouldmeettherequirements,asshownin
8ConfidentialandProprietaryInformationofZTECORPORATION

Chapter2InstallationOverview
PowerSupply
Inspection
TherequirementsofZXSDRR8860powersupplyaredescribedas
follows.
1.DCpowersupply:ZXSDRR8860is–48VDCpowersupplyand
thevoltageofpowersupplyis–40VDC~–57VDC.
2.IndirectACpowersupply:adoptanoutdoorACunit(OAU);
theOAUcanprovide220VACpowersupplyforoneZXSDR
B8200C100andoneZXSDRR8860atthesametime.
Lightning
Inspection
TheZXSDRR8860lightningrequirementsaredescribedasfollows.
�OutdoorInstallation
i.ForDCpowersupply,congureanoutdoorDClightningbox
OLP48-2.IftheDCpowerisexportedfromtheequipment
room,thelengthofpowercableismorethan10m(less
than50m)andtheoutputendofindoorDCpowerisnot
conguredwithB-levelorabovelightningdevices,itisre-
quiredtocongureanindoorDClightningboxILP48–3in
theequipmentroom.
ii.ForindirectACpowersupply,itisrequiredtocongurean
AClightningbox(ZXPCScombinedarrester).
�Forindoorinstallation,ifthepowercableisdistributedout-
doors,congurethepowerlightningboxaccordingtothecon-
ditionsofoutdoorinstallation.
Grounding
Inspection
ZXSDRR8860adoptsanassociatedgroundingmode.Thevalue
ofgroundingresistanceisnotmorethan5ohm.
OtherInspections1.Thecorollarydevicesorcomponentsshouldaccordwiththe
requirementsofZXSDRR8860engineeringdesigndrawing.
2.ThetransmissiondevicesinterconnectedwithBBUshouldhave
beenprepared.
ToolsandInstrumentsPreparation
Table2showstoolsandmeterslistrequiredduringinstallation.
TABLE2TOOLANDMETERLIST
CategoryName
Onefeederconnectorknife
Onewirestripper
Onecrimpingpliers
Special-purposetools
Onemulti-functionalcrimpingpliersEarth
resistancetester
Oneelectricpercussiondrill
Auxiliaryandsamplebits
Onevacuumcleaner
Concretedrillingtools
Powersocket(two-phaseandthree-phase
socket,withcurrentcapacitygreaterthan15
A)
ConfidentialandProprietaryInformationofZTECORPORATION9

ZXSDRR8860InstallationManual
CategoryName
Crossscrewdrivers(4”,6”and8”each)
Flatheadscrewdrivers(4”,6”and8”each)
Adjustablewrenches(6’ ,8’,10’and12’)
Dual-purposespanners(17”and19”each)
Onesetofsocketwrench
5kg(11lb)nailhammer
One300Wiron
One40Wiron
Solderwires
Hotblower
Oilpaintbrush
Pliers
Scissor
General-purposetools
Paperknife
One50m(164feet)tapemeasure
One5m(16feet)steeltape
One400mm(16inches)levelbar
Oneanglemeter
Onecompass
Measurementtools
Plumb
Antistaticwriststrap
Safetyhelmet
Protectiontools
Pairofgloves
Onehacksaw(withseveralsawblades)
Onepairofsharp-nosepliers(8″)
Onepairofdiagonalpliers(8″)
Onepairofslipjointpliers(8″)
Onepairofvices(8″)
Clamptools
Crowbar
Chainwheel
Rope
Ladder
Auxiliarytools
Forklift
On-siteDocuments
ZXSDRR8860installationneedsthefollowingtechnicaldocuments
tobeready.
10ConfidentialandProprietaryInformationofZTECORPORATION

Chapter2InstallationOverview
�ZXSDRR8860EngineeringExplorationReport
�ZXSDRR8860EnvironmentAcceptanceReport
ZXSDRR8860manualkitincludes:
�ZXSDRR8860CommissioningandCongurationManual
�ZXSDRR8860OperationandMaintenanceManual
�ZXSDRR8860TechnicalManual
UnpackingAcceptance
CountingGoods
PrerequisiteThetransportedcargoshouldhavereachedtheinstallationsite.
ContextTherepresentativeofcustomerandtheprojectsupervisormustbe
presentonsiteduringcountingofgoodsreceived.Ifanypartyis
notpresentatthattime,transportermustholdtheresponsibility
foranydiscrepanciesingoods.
Thestepsinvolvedincountinggoodsareasfollows:
Steps1.CheckDeliveryChecklistofZTECorporation.Checktotalnum-
berofgoods,intactnessofpackingboxes,andcheckwhether
arrivalplaceistheactualinstallationplaceagainstpackinglist
numberattachedtopackingboxes.Ifgoodsareintact,start
tounpackandinspectthem.
Note:
Itisrecommendedtounpackthegoodsafterabout30minutes
ofreceivingthecargo,sincethereisapossibilityofmoisture
contentduetotemperaturevariationsifany.
2.Equipmentinspectionlistandunpackingacceptancereportare
presentintherstpackingcarton.Firstly,openrstpacking
cartonandtakeouttheUnpackingAcceptanceReporttocheck
whetherthegoodsreceivedareinaccordancewiththeinspec-
tionlist.
3.Duringthecountingandunpackinginspectionprocess,ifany
materialisfoundshort,orgoodsdamaged,thenll-inUnpack-
ingAcceptanceFeedbackTableandcontactZTEpromptly.
ENDOFSTEPS.
CrateUnpacking
PrerequisitePreparetheappropriatetoolssuchasstraightscrewdriver ,pliers,
andcrowbar .
ContextPerformthefollowingstepstoopenthecrate:
ConfidentialandProprietaryInformationofZTECORPORATION11

ZXSDRR8860InstallationManual
Steps1.Insertastraightscrewdriverintotheslitbetweencrateand
frontcoverboardtomakeitloose;theninsertcrowbartoun-
clenchcoverboard.
2.Pullthecoverboardoutfromthecrate.
3.Removetheotherboardsofthecrate.
ENDOFSTEPS.
CartonUnpacking
PrerequisitePreparetheappropriatetoolssuchasstraightscrewdriver ,diago-
nalpliers,andpaperknife.
ContextPerformthefollowingstepstounpackthecarton:
Steps1.Usediagonalplierstocutpackingstraps.
2.Useapaperknifetocutadhesivetapealongtheslitsoncarton
cover ,avoiddamaginggoodsinside.
3.Openthecarton,andremovethefoamboard.
4.Checkthegoodswithinthecarton.
Note:
�Avoiddamagingtheantistaticbag(Itcanbeusedinthe
futureforstorageofspareparts)duringunpacking.
�Whiletheequipmentismovedtoahotteranddamper
place,waitfor30minutesbeforeunpackingtheequipment.
Otherwise,moisturemaycondenseonthesurfaceofthe
equipmentandcausedamage.
�Properlydisposeofrecycledesiccants.
ENDOFSTEPS.
AcceptanceandGoodsHandover
ContextPerformthisprocedureforacceptinggoods,andhandingthem
overtooperators.
Steps1.Acceptance
Baseduponthename,categoryandnumbermentionedonthe
shippinglist,carefullycheckthegoodspiecebypiece.Make
surethatgoodsfullthefollowingconditions:
i.Makesurethattherearenobubbly,peeling,nickandlth
markonthesurfaceofthechassis.
ii.Ensurethatoilpaintonthechassissurfaceisintact.
iii.Ensureclampingscrewsaretightandintact.
iv.Allthecomponentsareproperlyinstalledattheirrespective
positions.
12ConfidentialandProprietaryInformationofZTECORPORATION