Zte ZXA10 C300 User manual

ZXA10C300
OpticalAccessConvergenceEquipment
CabinetInstallationGuide(19Inch)
Version:V1.2.1
ZTECORPORATION
NO.55,Hi-techRoadSouth,ShenZhen,P .R.China
Postcode:518057
Tel:+86-755-26771900
Fax:+86-755-26770801
URL:http://ensupport.zte.com.cn
E-mail:[email protected]

LEGALINFORMATION
Copyright©2011ZTECORPORATION.
Thecontentsofthisdocumentareprotectedbycopyrightlawsandinternationaltreaties.Anyreproductionor
distributionofthisdocumentoranyportionofthisdocument,inanyformbyanymeans,withoutthepriorwritten
consentofZTECORPORATIONisprohibited.Additionally,thecontentsofthisdocumentareprotectedby
contractualcondentialityobligations.
Allcompany,brandandproductnamesaretradeorservicemarks,orregisteredtradeorservicemarks,ofZTE
CORPORATIONoroftheirrespectiveowners.
Thisdocumentisprovided“asis”,andallexpress,implied,orstatutorywarranties,representationsorconditions
aredisclaimed,includingwithoutlimitationanyimpliedwarrantyofmerchantability,tnessforaparticularpurpose,
titleornon-infringement.ZTECORPORATIONanditslicensorsshallnotbeliablefordamagesresultingfromthe
useoforrelianceontheinformationcontainedherein.
ZTECORPORATIONoritslicensorsmayhavecurrentorpendingintellectualpropertyrightsorapplications
coveringthesubjectmatterofthisdocument.ExceptasexpresslyprovidedinanywrittenlicensebetweenZTE
CORPORATIONanditslicensee,theuserofthisdocumentshallnotacquireanylicensetothesubjectmatter
herein.
ZTECORPORATIONreservestherighttoupgradeormaketechnicalchangetothisproductwithoutfurthernotice.
UsersmayvisitZTEtechnicalsupportwebsitehttp://ensupport.zte.com.cntoinquirerelatedinformation.
TheultimaterighttointerpretthisproductresidesinZTECORPORATION.
RevisionHistory
RevisionNo.RevisionDateRevisionReason
R1.12011-12-31Versionupdate
R1.02011-09-30Firstedition
SerialNumber:SJ-20110909101511-005
PublishingDate:2011-12-31(R1.1)

Contents
AboutThisManual.........................................................................................I
Chapter1Overview....................................................................................1-1
1.1CabinetIntroduction...........................................................................................1-1
1.2CabinetFeatures................................................................................................1-2
1.3EquipmentConguration....................................................................................1-3
1.3.1CabinetConguration...............................................................................1-3
1.3.2ShelfConguration...................................................................................1-4
1.3.3Cards......................................................................................................1-6
1.4SystemComponents..........................................................................................1-7
1.5T echnicalStandards...........................................................................................1-8
1.6T echnicalSpecications....................................................................................1-10
1.7PerformanceSpecications................................................................................1-11
Chapter2Pre-InstallationPreparation.....................................................2-1
2.1InstallationPreparationFlow...............................................................................2-1
2.2EngineeringDocumentsPreparation...................................................................2-2
2.3T oolsandMeters................................................................................................2-3
2.4InstallationEnvironmentCheck...........................................................................2-4
2.4.1ConstructionCheck..................................................................................2-4
2.4.2IndoorEnvironmentCheck........................................................................2-4
2.4.3PowerSupplyCheck................................................................................2-5
2.4.4GroundingCableCheck............................................................................2-6
2.4.5SecurityCheck.........................................................................................2-6
2.4.6OtherSupportingFacilitiesCheck.............................................................2-6
2.5Unpacking.........................................................................................................2-7
2.5.1UnpackingCabinet...................................................................................2-7
2.5.2UnpackingShelf.....................................................................................2-10
2.5.3UnpackingCards.....................................................................................2-11
Chapter3CabinetInstallation...................................................................3-1
3.1CabinetInstallationFlowchart.............................................................................3-1
3.2BaseInstallationMode.......................................................................................3-2
3.2.1BaseStructure.........................................................................................3-2
3.2.2BaseInstallationFlowchart.......................................................................3-5
3.2.3PositioningBase......................................................................................3-5
I

3.2.4InstallingBase.........................................................................................3-7
3.2.5FixingCabinet..........................................................................................3-7
3.3FootInstallationMode........................................................................................3-9
3.3.1FootInstallationFlowchart........................................................................3-9
3.3.2PositioningCabinet................................................................................3-10
3.3.3InstallingExpansionBolt.........................................................................3-12
3.3.4FixingCabinet........................................................................................3-12
3.4CabinetsConnection........................................................................................3-14
3.4.1CabinetsConnectioninBaseInstallationMode........................................3-14
3.4.2CabinetsConnectioninFootInstallationMode.........................................3-16
3.4.3AdjacentCabinetsConnection................................................................3-18
3.5ShelfInstallation...............................................................................................3-19
3.6Plug-inBoxInstallation.....................................................................................3-20
3.7CardInstallation...............................................................................................3-21
Chapter4PowerSupplyInstallation........................................................4-1
4.1PowerandGroundingCables.............................................................................4-1
4.2InstallationFlowchart..........................................................................................4-1
4.3PowerandGroundingCableStructure.................................................................4-2
4.4PowerandGroundingCableInstallation..............................................................4-4
4.4.119-InchPowerDistributor..........................................................................4-4
4.4.2-48VInputPowerCableInstallation..........................................................4-6
4.4.3InternalPowerCableInstallation...............................................................4-7
4.4.4GroundingCableInstallation.....................................................................4-8
Chapter5CableConnection.....................................................................5-1
5.1OverallCabling..................................................................................................5-1
5.2CableLayout.....................................................................................................5-2
5.2.1CablingPrinciples....................................................................................5-2
5.2.2CableBundling.........................................................................................5-3
5.3E1/T1Cable.......................................................................................................5-6
5.4MonitoringCables............................................................................................5-10
5.4.1EntranceControlMonitoringCable...........................................................5-11
5.4.2SmogMonitoringCable..........................................................................5-12
5.4.3FloodMonitoringCable...........................................................................5-13
5.4.4T emperatureMonitoringCable................................................................5-14
5.4.5HumidityMonitoringCable......................................................................5-15
5.5SerialPortCable..............................................................................................5-16
5.6NetworkCable.................................................................................................5-18
II

5.7OpticalFiber....................................................................................................5-19
Chapter6InstallationCheck.....................................................................6-1
6.1OverallInspection..............................................................................................6-1
6.2Power-ON/OFFInspection..................................................................................6-2
6.2.1InspectionbeforePower-ON.....................................................................6-2
6.2.2Power-ONProcess...................................................................................6-3
6.2.3Power-OFFProcess.................................................................................6-4
AppendixAIndoorCabinetGroundingSystemConnection................A-1
A.1Overview...........................................................................................................A-1
A.2CentralOfceCabinetGrounding........................................................................A-1
A.2.1CentralOfceCabinetGrounding..............................................................A-1
A.2.2RemoteOfceCabinetGrounding.............................................................A-3
AppendixBGroundingNetworkRequirements.....................................B-1
B.1GroundingCableRequirements..........................................................................B-1
B.2CabinetandCentralOfce..................................................................................B-2
B.3Outgoing/IncomingCablesfrom/toCentralOfce.................................................B-2
AppendixCLightningProofNetwork......................................................C-1
C.1LightningRequirements.....................................................................................C-1
C.2LightningDesign................................................................................................C-1
C.3LightningProtectionGroundinginCentralOfce..................................................C-2
C.4LightningProtectionGroundinginRemoteOfce.................................................C-2
Figures.............................................................................................................I
Tables............................................................................................................III
Glossary.........................................................................................................V
III

IV

AboutThisManual
Purpose
TheZXA10C300OpticalAccessConvergenceEquipment(ZXA10C300forshort)isa
full-serviceopticalaccessplatform.Itsupportsthevideo,data,voice,TDM,andCATV
services.TheZXA10C300canbeconnectedwithMDUs/ONUs/ONTsthroughvarious
networkingtechnologies.
TheZXA10C300deviceconsistsoftheswitchingandcontrolcards,PONinterfacecards,
uplinkcards,Ethernetinterfacecard,P2Pinterfacecards,TDMinterfacecards,and
commoninterfacecard.Itprovideslarge-capacitycontrollablemulticastandhighQoS
control.
ThismanualprovidesproceduresandguidelinesthatsupporttheinstallationoftheZXA10
C300OpticalAccessConvergenceEquipment.
IntendedAudience
Thisdocumentisintendedfortheinstallationanddebuggingengineers.
PrerequisiteSkillandKnowledge
Tousethisdocumenteffectively,usersshouldhaveageneralunderstandingofnetwork
technology.Familiaritywiththefollowingishelpful:
lTheZXA10C300systemanditsvariouscomponents
lMaintenanceprocedures
lLocaloperatingprocedures
WhatIsinThisManual
Thismanualcontainsthefollowingchapters:
ChapterSummary
Chapter1,OverviewProvidesthedeviceintroduction,features,
interfaces,conguration,components,standard
compliance,technicalspecications,and
performancespecications.
Chapter2,Pre-InstallationPreparationDescribestheengineeringdocumentspreparation,
toolsandmeterspreparation,installation
environmentcheck,equipmentroomlayout,and
equipmentunpacking.
I

ChapterSummary
Chapter3,CabinetInstallationDescribesthecabinetinstallationow,cabinet
installation,decorativepanelinstallation,shelf
installation,cardinstallation,andfantray
installation.
Chapter4,PowerSupplyInstallationDescribesthepowercableandgroundingcable
installationow,cabledetails,andfantraypower
supplysystem.
Chapter5,CableConnectionDescribestheoverallcabling,cablingprinciples,
maintenancecables,andopticalberlayout.
Chapter6,InstallationCheckDescribestheoverallinspection,powersupply
inspection,andpower-ON/OFFinspection.
AppendixA,IndoorCabinetGroundingSystem
Connection
Describesthegroundingforracksystemincentral
equipmentroomandremoteequipmentroom.
AppendixB,GroundingNetworkRequirementsDescribesthegroundingrequirementsforthe
accessnetwork,groundingcablerequirements,
groundingconnectionrequirements,grounding
resistancerequirements,ingressandegress
communicationofce(station)cablerequirements.
AppendixC,LightingProofNetworkDescribesthelightningprotectionrequirementsand
lighteningprotectiondesign.
Conventions
ZTEdocumentsemploythefollowingtypographicalconventions.
TypefaceMeaning
ItalicsReferencestootherManualsanddocuments.
“Quotes”Linksonscreens.
BoldMenus,menuoptions,functionnames,inputelds,radiobuttonnames,check
boxes,drop-downlists,dialogboxnames,windownames.
CAPSKeysonthekeyboardandbuttonsonscreensandcompanyname.
Note:Providesadditionalinformationaboutacertaintopic.
Checkpoint:Indicatesthataparticularstepneedstobecheckedbefore
proceedingfurther.
Tip:Indicatesasuggestionorhinttomakethingseasierormoreproductive
forthereader.
Mouseoperationconventionsarelistedasfollows:
II

TypefaceMeaning
ClickReferstoclickingtheprimarymousebutton(usuallytheleftmousebutton)once.
Double-clickReferstoquicklyclickingtheprimarymousebutton(usuallytheleftmousebutton)
twice.
Right-clickReferstoclickingthesecondarymousebutton(usuallytherightmousebutton)
once.
III

IV

Chapter1
Overview
TableofContents
CabinetIntroduction...................................................................................................1-1
CabinetFeatures........................................................................................................1-2
EquipmentConguration............................................................................................1-3
SystemComponents..................................................................................................1-7
TechnicalStandards...................................................................................................1-8
TechnicalSpecications...........................................................................................1-10
PerformanceSpecications......................................................................................1-11
1.1CabinetIntroduction
Accordingtodifferentshelfsizes,ZXA10C300uses19-inchindoorcabinetsB6030-22C-IB
andB6060-22F,and21-inchindoorcabinetB6030-22C-EB.Eachcabinetcanholdtwo
ZXA10C300shelves.
Thismanualintroduces19-inchcabinets.
lB6030-22C-IBcabinet
Dimensions:2200mm×600mm×300mm(Height×Width×Depth)
Itisusedtoholdthe19-inchshelf(withthewidthof19inches,thatis,483mm).
lB6060-22Fcabinet
Dimensions:2200mm×600mm×600mm(Height×Width×Depth)
Itisusedtoholdthe19-inchshelf.
Figure1-1showstheB6030-22C-IBcabinetappearance.
1-1
SJ-20110909101511-005|2011-12-31(R1.1)ZTEProprietaryandCondential

ZXA10C300CabinetInstallationGuide(19Inch)
Figure1-1CabinetAppearance
Figure1-2showstheB6060-22Fcabinetappearance.
Figure1-2CabinetAppearance
1.2CabinetFeatures
TheB6030-22C-IBandB6060-22Fcabinetsareapplicabletotheareaswherethereare
alargenumberofusersandthereareequipmentrooms.
Thecabinetshavethefollowingfeatures:
lLargecapacity
1-2
SJ-20110909101511-005|2011-12-31(R1.1)ZTEProprietaryandCondential

Chapter1Overview
lEasyinstallation
lEasycabling
lCompletemonitoringfunctions
lHighanti-interferencecapability
lGoodventilation
lNiceappearance
1.3EquipmentConguration
Thissectionincludesthefollowing:
lCabinetConguration
lShelfConguration
lCards
1.3.1CabinetConfiguration
Figure1-3showsthecabinetcongurationforthe19-inchshelves.
1-3
SJ-20110909101511-005|2011-12-31(R1.1)ZTEProprietaryandCondential

ZXA10C300CabinetInstallationGuide(19Inch)
Figure1-619-InchShelfConguration
TechnicalSpecications
Table1-1liststechnicalspecicationsofthe19-inchshelf.
Table1-119-InchShelfTechnicalSpecications
ItemSpecication
Dimensions443.7mm×482.6mm×270mm(Height×Width×Depth)
Weight12.5kg(Empty)
34.2kg(Fullconguration)
1.3.3Cards
TheZXA10C300shelfconsistsofcardsandafanmodule,aslistedinTable1-2.
Table1-2CardList
CardTypeNameDescription
SCXMType-Mswitchingandcontrolcard Switchingandcontrol
cardSCXLType-Lswitchingandcontrolcard
GTGO8-portGPONinterfacecard
GTGQ4-portGPONinterfacecard
ETGO8-portEPONinterfacecard
PONinterfacecard
ETXD2-port10GEPONasymmetricinterfacecard
1-6
SJ-20110909101511-005|2011-12-31(R1.1)ZTEProprietaryandCondential

Chapter1Overview
CardTypeNameDescription
XUTQ4-port10GEopticalinterfaceEthernetuplinkcard
GUFQ4-portGE/FEopticalinterfaceEthernetuplinkcard
GUTQ4-portGEelectricalinterfaceEthernetuplinkcard
GUSQ2-portopticaland2-portelectricalinterfaceEthernet
uplinkcard
HUTQ2-port10GEand2-portGEopticalinterfaceEthernet
uplinkcard
HUGQ2-portGEand2-portFEopticalinterfaceEthernetuplink
card
HUTQ2-port10GEand2-portGEopticalinterfaceEthernet
uplinkcard
Uplinkcard
HUWQ2-port10GEand2-portGEopticalinterfaceEthernet
uplinkcard
FTGH16-portP2PEthernetinterfacecard P2Pinterfacecard
FTGK48-portP2PEthernetinterfacecard
EthernetinterfacecardGDFO8-portGEopticalEthernetinterfacecard
CTLASTM-NCESinterfacecard
CTBB32-portE1balancedCESinterfacecard
CTTB32-portT1CESinterfacecard
TDMinterfacecard
CTUB32-portE1unbalancedCESinterfacecard
Commoninterface
card
CICGCommoninterfacecard
MWIA
MWIT
Backplane
MWIR
19-inchbackplane
PowercardPRWG4.5Upowerinterfacecard
FanmoduleFAN-C300Fanmodule
1.4SystemComponents
TheZXA10C300cabinetconsistsofthefollowingcomponents:
PowerSupplyModule
Theequipmentroomprovides-48VDCpowerforthecabinet.
ThePRWGpowercardprovidesthesecondarypowertoalltheinterfacecards.
1-7
SJ-20110909101511-005|2011-12-31(R1.1)ZTEProprietaryandCondential

ZXA10C300CabinetInstallationGuide(19Inch)
FanModule
Fanmoduleisabox,whichis1Uinheightand19inchesinwidth.
WiringArea
Thewiringareaholdsanindependentwiringplug-inbox.Itprovidesanareaforwiringand
adust-proofnet.
MonitoringModule
Themonitoringmoduleisthecommoninterfacecard,whichprovidesclock,management,
monitoring,andN:1protectioninterfaces.
FunctionalCardArea
ThefunctionalcardareaintheIEC19-inchshelfhasseventeen9Uslotsandfour4.5U
slots.
1.5TechnicalStandards
Table1-3liststhetechnicalstandardsthattheB6030-22C-IBcabinetcomplieswith.
Table1-3TechnicalStandards
StandardNo.StandardName
YDN065-1997GeneralT echnicalSpecicationsofTelephone
SwitchingEquipmentIssuedbytheMinistryof
PostsandTelecommunications
YDN099-1998OpticalSynchronousTransmissionNetwork
TechnicalSystem
YDN108-1998TechnicalSpecicationsofConsistencyT estof
V5.2Interface
YDN033-1997TechnicalRequirementsforLocal
TelecommunicationNetworkManagement
YDN034.2-1997ISDNUsers-NetworkInterfaceT echnical
Specications
YDN086-1998SDHTransmissionNetworkManagement
TechnologySystem
YDN088-1998AutomaticSwitchingTelephone(Digital)Network
TechnologyMechanism
YD/T950-1998TechnicalRequirementsandT estMethods
forTelecommunicationSwitchingEquipment
Over-VoltageOver-CurrentPrevention
1-8
SJ-20110909101511-005|2011-12-31(R1.1)ZTEProprietaryandCondential

Chapter1Overview
StandardNo.StandardName
YD/T1007-1999DistributionofTransmissionPerformanceIndices
inAccessNetwork
YD/T1033-2000TransmissionPerformanceIndexSeries
YD/T1011-1999TechnicalRequirementsandT estingMethodsfor
DigitalSynchronousNetworkNodeSlaveClock
YD/T1012-1999DigitalSynchronousNetworkNodeClockSeries
andTimingCharacteristics
YD/T1061-2000TechnicalRequirementsforTransmittingIPLAPS
onSynchronousDigitalHierarchy(SDH)(Similar
toX.85)
YD/T1022-1999FunctionsRequirementsforSynchronousDigital
Hierarchy(SDH)Equipment
YD/T1099-2001TechnicalSpecicationsforGigabitEthernet
Exchange
YD/T1141-2001TestMethodsforGigabitEthernetExchange
YD/T1160-2001AccessNetworkTechnicalRequirement-
BroadbandAccessNetworkBasedonEthernet
Technology
YD/T1238-2002TechnicalRequirementsforMultiServices
TransmissionBasedon
GB-T6879-1995TechnologiesandT estMethodsfor2048Kbps
30-channelPCMMultiplexingEquipment
GF002-9002GeneralT echnicalSpecicationsofTelephone
SwitchingEquipmentIssuedbytheMinistryof
PostsandTelecommunications
GB4798.1-86ElectronicandElectricProductsApplication
EnvironmentConditions,Storage
GB4798.2-84ElectronicandElectricProductsApplication
EnvironmentConditions,Transportation
GIB-Z35-93ComponentDeratingRules
GJB450-88GeneralGuidelineforEquipmentResearchand
ProductionReliability
GJB-299A-91PredictionManualforElectricEquipment
Reliability
ANSI/IEEEStd802.1DMediaAccessControl(MAC)NetworkBridge
(1998)
1-9
SJ-20110909101511-005|2011-12-31(R1.1)ZTEProprietaryandCondential

ZXA10C300CabinetInstallationGuide(19Inch)
StandardNo.StandardName
ITU-TG.703Physical/ElectricalCharacteristicsofSeries
DigitalInterfaces
ITU-TG.704StructureofAllSynchronizationFramesof
PrimaryGroupRateandSecondaryGroupRate
Series
ITU-TG.960DigitalSegmentforISDNBasicAccess
ITU-TG.961DigitalTransmissionSystemAccessedtothe
LocalFullMetalLineatISDNBasicRate
ITU-TG.962DigitalSegmentUsedforAccessingofISDN
2048kbpsPrimaryGroupRate
ITU-TI.430SpecicationsforLayer1ofNetworkInterface-
ISDNBasicAccessUsers
ITU-TI.431SpecicationsforLayer1ofISDNPrimaryGroup
RateAccessUsers-NetworkInterface
1.6TechnicalSpecications
DimensionsandWeight
Thecabinetdimensionsandweightareasfollows:
lB6030-22C-IBcabinet
Dimensions:2200mm×600mm×300mm(Height×Width×Depth)
Weight(empty):61kg
Weight(fullconguration):172kg
lB6060-22Fcabinet
Dimensions:2200mm×600mm×600mm(Height×Width×Depth)
Weight(empty):110kg
Weight(fullconguration):222kg
OperationEnvironment
Theequipmenthasthefollowingoperationenvironmentrequirements:
lTemperature:-5℃to45℃
lHumidity:5%-95%
lTemperaturechangeratio:≤3℃/min
1-10
SJ-20110909101511-005|2011-12-31(R1.1)ZTEProprietaryandCondential
Other manuals for ZXA10 C300
2
Table of contents
Other Zte Touch Terminal manuals